快速阀控制电路

本文介绍快速阀控制电路的用途、技术指标、框图及电路原理。对克服严重现场干扰、使控制电路具有高度可靠性方面所采取的具体措施也进行了比较系统的介绍。     

平板上挡板前后涡核位置的测量

在水洞中用氢气泡法在平板上挡板前后的涡核位置进行了测量。本试验旨在确定挡板高度及其雷诺数对涡核装置的影响，结果表明，（ａ）对于单个挡板情况，涡核离开平板的高度和涡核与挡板的距离将随着挡板的高度增加而增加，但涡核的高度和距离与挡板高度的比例随挡板高度的增加而降低；（ｂ）对于两个挡板情况，挡板的高度和挡板之间的距离对涡核位置的影响是主要的。     

耐高液（气）压部附件测试系统的开发

飞机上耐高液（气）压部附件易发生泄漏破损等问题，对飞机的安全运行至关重要。本文开发了一种测试系统，以气体和液体为介质，以飞机蓄压器为例，通过压力检查、泄露测试、摩擦阻力测试，检测待测部件是否合格。检测结果证明，该测试系统可作为飞机机械系统耐高液（气）压部附件检测的一种参考方法。     

三硝基间苯二酚中硫酸测定的研究

本文研究了硫酸钡在氨水溶液中与ＥＤＴＡ的反应条件，提出用ＥＤＴＡ滴定法测定三硝基间苯二酚中的硫酸。本法准确度较高，稳定性好，操作简单，与样品标准值对照，结果满意。     

高精度温度控制方式述评

对高精度温度控制系统中常用的模拟控制方式、数字控制方式和模拟/数字控制方式作了比较,目的在于找到既能满足计量检定恒温装置所需的技术指标、又方便实用的控制方式.     

SQL Server数据复制在自来水数据库系统中的实现

介绍了Microson SQL Server数据复制的概念、工作原理和拓扑结构,并结合自来水公司的业务特点和应用需求,提出了适合企业业务发展的分布式系统解决方案.     

不同型线结构船艏表面压力特性对比实验研究

为优选船艏结构型线方案,在风洞中针对三个在结构型线上仅有细微差别的船艏方案进行表面压力特性对比测试。实验获得了各型线方案模型表面压力空间分布特性和压力脉动特性,并通过表面压力特性的综合对比进行了结构型线评估,为船艏的结构型线设计提供直接的技术依据。     

A novel approach for predicting inlet pressure of aircraft hydraulic pumps under transient conditions

Cavitation caused by insufficient suction is a major factor that influences the life of aircraft pumps. Currently, pressurizing the tank can solve the cavitation problem under steady large-flow conditions. However, this method is not always effective under transient conditions (from zero flow to full flow in a very short time). Moreover, to apply and design other measures, such as a boost impeller, the suction dynamics during the transient period must be investigated. In this paper, a novel approach based on the pressure wave propagation theory is proposed for predicting the inlet pressure of an aircraft pump under transient conditions. First, a dynamic model of a typical aircraft pump is established in the form of differential equations. Then, the transient flow model of the inlet line is described using momentum and continuity equations, and the governing equations are discretized by the method of characteristics and the finite difference method. The simulated results are in good agreement with the results from verification tests. Further simulation analysis indicates that the wave velocity and transient time may influence the inlet and reservoir pressure as well as the size of the inlet line. Finally, solutions for upgrading the inlet pressure are discussed. These solutions provide guidelines for designing inlet installations.     

Experimental investigation and correlation development of jet impingement heat transfer with two rows of aligned jet holes on an internal surface of a wing leading edge

Extensive experimental studies on the heat transfer characteristics of two rows of aligned jet holes impinging on a concave surface in a wing leading edge were conducted, where50000 Rej 90000, 1.74 H/d 27.5, 66° a 90°, and 13.2 r/d 42.03. The finding was that the heat transfer performance at the jet-impingement stagnation point with two rows of aligned jet holes was the same as that with a single row of jet holes or the middle row of three-row configurations when the circumferential angle of the two jet holes was larger than 30°. The attenuation coefficient distribution of the jet impingement heat transfer in the chordwise direction was so complicated that two zones were divided for a better analysis. It indicated that: the attenuation coefficient curve in the jet impingement zone exhibited an approximate upside-down bell shape with double peaks and a single valley; the attenuation coefficient curve in the non-jet impingement zone was like a half-bell shape, which was similar to that with three rows of aligned jet holes; the factors,including Rej, H/d and r/d, affected the attenuation coefficient value at the valley significantly.When r/d was increased from 30.75 to 42.03, the attenuation rates of attenuation coefficient increased only by 1.8%. Consequently, experimental data-based correlation equations of the Nusselt number for the heat transfer at the jet-impingement stagnation point and the distributionof the attenuation coefficient in the chordwise direction were acquired, which play an important role in designing the wing leading edge anti-icing system with two rows of aligned jet holes.