燃气轮机滚动轴承故障模式及延寿方法

分析了燃气轮机滚动轴承常见的10种故障模式及其产生原因,研究了相应的延寿方法及其延寿机理。     

某重型燃气轮机放气活门及排气管路的改进设计

针对某重型燃气轮机放气系统放气活门在结构设计上存在的问题,经过分析和论证,提出了改进方案,通过计算验证了该方案可以实施。     

周向总压畸变对多级轴流压气机稳定性影响的逐级模拟方法

介绍了1种分析进口总压畸变对多级轴流压气机特性影响的逐级模拟方法。应用该方法对J85-13压气机的进口总压畸变进行了分析,并对压气机在稳态和畸变情况下特性的逐级模拟计算结果进行了详细的数值分析,讨论了压气机的失稳关键级以及有效进气攻角对多级轴流压气机特性的影响。计算结果与试验结果的比较表明,该模拟方法是合理可行的。     

保载条件下FGH95材料的疲劳特性及寿命建模

针对FGH95粉末冶金材料进行了650℃时不同保载形式(拉伸保载、压缩保载和拉压保载)的疲劳试验, 分析了其变形特征和疲劳寿命分布特征以及保载对疲劳寿命的影响.并据此, 为改进保载条件下疲劳寿命的建模, 提出了迟滞环位置-形状修正因子的概念, 进而得到了一种修正的非弹性应变能~寿命方程.经对该材料疲劳试验寿命的建模和计算分析表明:该方法相比其他几种工程上经常采用的寿命预测方程, 较好地解决粉末冶金材料高温保载疲劳时的寿命建模问题, 且该方程对试验寿命预测的精度更高, 形式简单, 具有明显的物理意义.      

Operating characteristics of a high radius pre-swirl cooling system

An experimental investigation into pre-swirl effectiveness and receiver hole discharge coefficient characteristics for a high radius injection pre-swirl cooling systems was carried out on a physically representative experimental rig with a 450 mm diameter rotor.The receiver holes and pre-swirl nozzle were located at a radius of 181 mm and 180 mm respectively.The experimental work was mainly conducted at 5 000～12 000 r/min,4 bar absolute pressure and 1.132 kg/s air supply.The maximum air supply temperature was 190 ℃.Pressure and temperature distributions in the pre-swirl system were examined with an emphasis on the velocity effectiveness of the pre-swirl system as a whole and on the discharge coefficients of the rotating 'receiver holes' in the rotor.The results showed that the velocity effectiveness increased with increasing swirl ratio resulting in reduced blade cooling flow temperature.Different seal flow configurations caused very different effectiveness at different speeds,but outflow through the inner and outer seals always gave the highest effectiveness compared other configurations.Increasing the seal flow rate reduced the effectiveness.For the coefficient of discharge,except for the low speed range,it increased with increase in swirl ratio for most speeds.      

Study on the breakup lengths of free round liquid jets

IntroductionBreakup and atomization of roundliquidjetshad been widely used in internal combustion en-gines,gas turbines,and liquid rocket engines.Recently,with the development of scramjet en-gines and the deepening of fuel atomization re-search,it attract…     

高灵敏GPS接收机抗干扰特性研究

采用圆环阵列天线,利用最小规范算法和线性约束最小方差算法对弱GPS信号的干扰信号进行了抑制,并分别针对固定和可变天线阵元数目以及固定和可变干扰信号等多种情况进行了仿真和分析.GPS信号的功率电平假设为-175dBW,干扰信号的功率值在-100dBW～-140dBW范围内可变.仿真结果表明,圆环天线阵列能精确地判定干扰信号的来波方向,该方法能很好地改善对来波干扰信号的赋零深度.     

基于网格变形技术的涡轮叶片变形传递

为实现学科耦合,需要在涡轮叶片多学科设计优化的气动模型和结构模型之间传递温度、气压和变形等载荷.研究结构变形向气动网格传递的实现方法.参数空间插值方法解决耦合面网格不一致时的变形插值问题;网格变形技术用来调整气动网格内部节点的位置,保证变形传递后的网格质量.某涡轮叶片变形传递实例的表明:该方法能够用于多学科设计优化问题中的变形传递.      

高陡度光学非球面高效制造的探讨

分析了计算机控制光学表面成形法、计算机控制应力盘抛光、磁流变抛光制造光学非球面元件的几项先进技术,探讨了光学元件的高速、高效加工,提出了高陡度光学非球面的固着磨料研磨加工。     

高精度高速走丝线切割机床大锥度机构的实现

设计了一种具有导丝器机构的高精度高速走丝线切割大锥度线架结构,以期提高高速走丝电火花线切割大锥度切割及多次切割精度。