超声光栅测声速

介绍了超声光栅测声速的实验，澄清了实验中的一些问题，并讨论了包括声压大小对实验结果的影响以及时间的累积对实时光栅产生的影响等问题，用数值分析的方式给予解答。     

Use of the ASTER satellite images for evaluation of structural changes in the Popocatépetl volcano related to microseismicity

Mexico is one of the most volcanically active regions in North America. Volcanic activity in central Mexico is associated with the subduction of the Cocos and Rivera plates beneath the North American plate. Periods of enhanced microseismic activity, associated with the volcanic activity of the Popocatépetl volcano are compared with periods, during which the microseismic activity was low. We detected systematical changes in the number of lineaments, associated with the microseismic activity due to lineament analysis of a temporal sequence of high resolution satellite images of the Popocatépetl volcano, provided by the ASTER/VNIR instrument. The Lineament Extraction and Stripes Statistic Analysis (LESSA) software package was used for the lineament extraction. In the future it would allow develop a methodology for detection of possible elevation of pressure in volcano edifice.     

Dynamical evolution of high area-to-mass ratio debris released into GPS orbits

A large set of simulations, including all the relevant perturbations, was carried out to investigate the long-term dynamical evolution of fictitious high area-to-mass ratio (A/M) objects released, with a negligible velocity variation, in each of the six orbital planes used by Global Positioning System (GPS) satellites. As with similar objects discovered in near synchronous trajectories, long lifetime orbits, with mean motions of about 2 revolutions per day, were found possible for debris characterized by extremely high area-to-mass ratios. Often the lifetime exceeds 100 years up to A/M ∼ 45 m²/kg, decreasing rapidly to a few months above such a threshold. However, the details of the evolution, which are conditioned by the complex interplay of solar radiation pressure and geopotential plus luni-solar resonances, depend on the initial conditions. Different behaviors are thus possible. In any case, objects like those discovered in synchronous orbits, with A/M as high as 20–40 m²/kg, could also survive in this orbital regime, with semi-major axes close to the semi-synchronous values, with maximum eccentricities between 0.3 and 0.7, and with significant orbit pole precessions (faster and wider for increasing values of A/M), leading to inclinations between 30° and more than 90°.     

UG在高速加工中的应用

高速加工(HSM)具有许多优点，被广泛应用在航空产品的数控加工中。但是使用高速加工技术，不仅要有适合高速加工的设备，选择适合进行高速加工的刀具，更为重要的是选择合理的编程策略。任何编程策略的不合理都会造成严重的后果。所以数控编程一直是高速加工的重点和难点。以UG软件为研究对象，作者提出了实现高速加工的数控编程的策略，并使用高速铣雕设备对生成的NG代码进行了加工，加工结果验证了NG代码是正确的、合理的。说明了采用合理的加工策略，使用UG软件可以实现高速加工的编程。     

一种测定大值的风速计

简单叙述了研制1种大风速值简易精密测量仪器原理和方法，并对测量误差进行了估算。     

高分影像辅助下的航空高光谱严密几何检校方法

 惯性测量单元(IMU)与传感器视准轴的偏心角和偏心矢量是造成航空线阵列高光谱数据几何校正误差的主要原因之一。在分析偏心角与偏心矢量误差来源之后提出该误差由IMU主轴与传感器主轴的角度偏差、测区固定偏差、GPS中心与传感器投影中心相对偏差组成,在此基础上建立了较为严密的检校模型。针对模型解算时需要大量高精度控制点的问题,提出了一种高分影像辅助下的亚像元精度控制点自动提取方法。通过多地区、多传感器高光谱航测实验表明,亚像元精度控制点能有效提高模型解算精度。新检校模型可获得亚像元校正精度,推扫式传感器——应用型机载成像光谱仪(AISA)建模中误差约为0.39个像元,摆扫式传感器——实用型模块化成像光谱仪(OMIS)建模中误差约为0.23个像元,校正后的影像可直接进行拼接。     

考虑重力的风机叶片水平加载测试方法

在风电叶片三维有限元参数模型中引入了重力产生的附加载荷,仿真计算了风电叶片水平加载方式的静载荷测试中附加载荷产生的水平方向的耦合位移,分析了耦合位移对测试过程中理论计算结果的影响;由于重力的叠加效应,测试中某些截面实际施加的等效载荷可能远超叶片设计的目标测试载荷,建议联合有限元分析,优化叶片安装角度和加载力方向的方法,降低叶片局部截面实际施加等效载荷的过载峰值。     

波音737-700/800发动机引气系统故障诊断与分析

针对波音737-700/800发动机引气系统经常发生的引气跳开及管道压力低等故障,结合引气系统的工作原理、特性以及实践经验进行了全面分析,并提出了明确的排故思路。     

波音737NG飞机感觉压差灯亮故障原因分析及排除方法

国航的波音737NG飞机机队频繁发生感觉压差灯亮故障,造成航班延误和取消,导致严重经济损失。结合实际排故经验,对飞机故障隔离手册中该故障的排故流程进行了补充和优化,优化后的排故步骤有助于维修人员更快速、更准确地排除故障,减少飞机非计划停场时间。     

某型压差活门的动态特性分析

压差活门是航空发动机数控系统燃油计量装置中重要的液压部件,其稳定性和动态性能直接影响控制系统的整体性能。根据压差活门非线性微分方程,采用小偏差线性化方法,推导出了压差活门的动态数学模型,得到了压差活门的方框图以及传递函数。选取某压差活门参数建立了Simulink仿真模型,分别在频域和时域分析了其动态性能。结果表明:在频域上,比较了有无节流器时的回路增益函数伯德图,认为敏感油路上的节流器可以改善稳定性且提高控制精度,通过设计节流器的尺寸可以调节穿越频域,从而改善系统的动态性能;在时域上,分析了不同节流器尺寸下阶跃响应的动态性能,其试验结果与实际工程经验一致。