双三角翼外翼前缘钝化对涡流特性的影响

通过风洞试验，利用７孔探头对７５°／４５°和７５°／６０°两种典型双三角翼进行了空间流场测量，研究了双三角翼前缘形状对大迎角涡流特性的影响．试验结果表明，双三角翼外翼前缘钝化使双涡态的双三角翼内、外翼涡互相靠拢、增加干扰，当出现合并涡态时，使合并涡涡核向内下方偏移；外翼前缘钝化使外翼涡或合并涡的Ｃｐ０、Ｖｘ较尖前缘时为高，最终使外翼涡或合并涡推迟破裂．     

燃烧室头部进气规律对煤粉燃烧效率的影响

用实验方法研究了火焰筒式煤粉燃烧室头部进气规律对燃烧效率的影响。通过对6种结构的头部配气方案的分析比较,得出了煤粉燃烧室合理的头部配气方案,为今后煤粉燃烧室的设计和工作状态的选择提供了重要的实验依据。     

双向比对高精度物理时间同步方法

提出一种面向未来卫星在轨应用的闭环物理高精度时间同步方法。比较了所提方法与其他时间同步方法的区别与优势，建立了远程系统时间同步基本模型与误差传递模型，基于双向测距和时间传递技术分析了高精度钟差获取原理，给出了时钟调整环路的时域频域参数依赖关系。完成了高精度时间同步地面试验系统构建，测试了开环非调钟状态下钟差测量精度误差、闭环调钟状态下时间同步准确度误差以及长时运行情况下的时间同步监测结果。测试结果表明，该方法能够实现优于1 ns量级的时间同步，为高精度时间同步技术研究提供了新的途径。     

Aerodynamic performance enhancement for flapping airfoils by co-flow jet

Introducing active flow control into the design of flapping wing is an effective way to enhance its aerodynamic performance. In this paper, a novel active flow control technology called Co-Flow Jet (CFJ) is applied to flapping airfoils. The effect of CFJ on aerodynamic performance of flapping airfoils at low Reynolds number is numerically investigated using Unsteady Reynolds Averaged Navier-Stokes (URANS) simulation with Spalart-Allmaras (SA) turbulence model. Numerical methods are validated by a NACA6415-based CFJ airfoil case and a S809 pitching airfoil case. Then NACA6415 baseline airfoil and NACA6415-based CFJ airfoil with jet-off and jet-on are simulated in flapping motion, with Reynolds number 70,000 and reduced frequency 0.2. As a result, CFJ airfoils with jet-on generally have better lift and thrust characteristics than baseline airfoils and jet-off airfoil when C_μ is greater than 0.04, which results from the CFJ effect of reducing flow separation by injecting high-energy fluid into boundary layer. Besides, typical kinematic and geometric parameters, including the reduced frequency and the positions of the suction and injection slot, are systematically studied to figure out their influence on aerodynamic performance of the CFJ airfoil. And a variable C_μ jet control strategy is proposed to further improve effective propulsive efficiency. Compared with using constant C_μ, an increase of effective propulsive efficiency by 22.6% has been achieved by using prescribed variable C_μ for NACA6415-based CFJ airfoil at frequency 0.2. This study may provide some guidance to performance enhancement for Flapping wing Micro Air Vehicles (FMAV).     

一次民机飞行中甚高频通信不稳定的排故

针对某型号民用飞机甚高频通信系统在飞行中出现断续故障的情况，对系统的架构进行描述，分析了故障产生的机理，提出了排故思路，记述了排故过程，并总结了甚高频通信系统的设计要点和工艺要点。     

Three-dimensional numerical analysis on combustion performance and flow of hybrid rocket motor with multi-segmented grain

This paper presents the combustion characteristics in hybrid rocket motors with multi-segmented grain through three-dimensional numerical simulations. Multi-segmented grain is composed of several thin grains with two or more ports. The numerical model consists of Navier-Stokes equations with turbulence, solid fuel pyrolysis, chemical reactions, a fluid–solid coupling model and a regression rate model. The simulations adopt 90% Hydrogen Peroxide (HP) and PolyEthylene (PE) as the propellant combination. The effects of the rotation, port number, fuel grain segment number and mid-chamber length on the flow field and combustion performances are analyzed. The results indicate that the multi-segmented grain configuration can strengthen the flow field, and the regression rate and combustion efficiency are enhanced. Take the cases with two grain segments and three ports for example, the regression rate is increased by 32.4%−45.1% and the combustion efficiency increases by 6%−8.6% in different rotation angles.     

Flow mechanism between purge flow and mainstream in different turbine rim seal configurations

The rim seal is used to prevent mainstream ingestion to the gap between the vane of a turbine and its blade. In this article, the dolphin lip with a hook configuration and a large seal cavity with hook structures are designed based on the high-pressure turbine datum single shark lip rim seal configuration. The sealing effect and parameters of the flow field are measured by an experiment method and a numerical simulation is used to explain the mechanism. For three configurations, the effect of the leakage slot vortex on the efficiency of the seal and the influence of leakage vortex, generated by the interaction between purge flow and mainstream flow, are discussed in depth. The result shows that the reverse vortex formed by the dolphin lip rim seal with hook structure will increase the sealing efficiency. The seal configuration with a large cavity improves sealing efficiency to a greater extent than the datum structure. At different purge flow rates and with unequal seal structures, the purge flow produces three types of leakage vortices in the passage. Besides, the seal configuration with dolphin lip produces a Kelvin-Helmholtz instability at the interface of the purge and the mainstream flows at a low purge flow rate to induce new leakage vortex branches in the passage of the blade.     

长板件数控加工技术的探索与研究

结合某型机板件在数控加工中的研制生产状况和存在的问题,论述了实现各种长板件类结构零件装夹定位、刀具及其参数、加工方案及程编策略.通过这些技术措施的实施,在一定程度上解决了在加工长板类零件装夹和定位时出现的零件变形、让刀效率低、质量不稳定等问题.     

供热系统集约化运行的能耗监测及节能调节问题探讨

对我校供热系统的现状进行了分析；指出了锅炉热效率及能耗监控方面的不足，并针对锅炉热效率提高和二次网循环泵变频调节进行了节能分析计算；同时根据我校实际情况对循环泵设备配置及控制进行了分析，提出了要加强技术指标量化考核和能耗监测，提高效率、节能降耗，实现供热系统的科学化、集约化运行。