一种负极性直流高压线性电源设计

本文提出了一种基于光耦反馈调整的负极性高压线性电源解决方案，使用NPN型三极管作为功率调整管的前提下，实现了负1200V直流电压输出。本文对提出的电源方案建立了小信号传递函数模型，在传递函数模型的基础上论证了所提出的电源系统具有稳定性高、噪声低等优点。     

不锈钢、钛合金导管高频钎焊工艺方法的改进

高频钎焊焊接方法在国内外进行研究的院校和公司相对较少，是一项较新的钎焊方法。国外在此项焊接工艺的研究和应用走在世界的前列。国内一直处于不断摸索和改进的过程中，焊接过程始终存在一些问题。通过本课题技术研究和相关的试验，详细地介绍了高频钎焊设备、工艺方法和高频钎焊工艺参数确定等方面的应用。     

高压液氧供应系统管路设计

高压液氧供应系统是我国压力最高的挤压式液体火箭发动机试验台的关键分系统。在系统设计过程中，通过合理布置管路，设计专用固定支架，采用自然补偿和堆积绝热技术，解决了高压低温推进剂系统管路设计中的难题。该系统顺利通过气密性检查和调试，经多次热试车考核，系统稳定可靠，满足设计要求。     

Regional and temporal variability of solar activity and galactic cosmic ray effects on the lower atmosphere circulation

In this work we studied the spatial and temporal structure of long-term effects of solar activity (SA) and galactic cosmic ray (GCR) variations on the lower atmosphere circulation as well as possible reasons for the peculiarities of this structure. The study revealed a strong latitudinal and regional dependence of SA/GCR effects on pressure variations in the lower troposphere which seems to be determined by specific features of baric systems formed in different regions. The temporal structure of SA/GCR effects on the troposphere circulation at high and middle latitudes is characterized by a roughly 60-year periodicity which is apparently due to the epochs of the large-scale atmospheric circulation. It is suggested that a possible mechanism of long-term effects of solar activity and cosmic ray variations on the troposphere circulation involves changes in the evolution of the polar vortex in the stratosphere of high latitudes, as well as planetary frontal zones.     

主燃孔位置对基于RQL高温升燃烧室流动与燃烧特性影响的数值模拟

为将富油燃烧/快速淬熄/贫油燃烧（RQL）用于高温升燃烧室设计，以实现温升与排放的良好统一，对不同主燃孔位置下 的单头部矩形燃烧室流动、淬熄区气流混合、燃烧和排放特性进行数值模拟。结果表明：燃烧室中心回流区的长度和高度随着主 燃孔轴向距离的增大而增大。随着主燃孔轴向距离的增大，主燃孔射流深度增加，射流角度逐渐向下游偏转，导致淬熄区内气流 的混合效果减弱；随着主燃孔位置的后移，富油区内的当量比显著增大，导致CO和碳烟的生成量迅速增加，淬熄区内的沿程高温 区域面积逐渐缩小，燃烧效率逐渐降低。当X/H=0.7时，燃烧室沿程NO生成量始终处在较大值；而当X/H=0.9时，燃烧室沿程NO 生成量始终处于较小值，但CO的生成量增大。     

IMPROVEMENT OF PHASE GRADIENT AUTOFOCUS ALGORITHM

ＩＭＰＲＯＶＥＭＥＮＴＯＦＰＨＡＳＥＧＲＡＤＩＥＮＴＡＵＴＯＦＯＣＵＳＡＬＧＯＲＩＴＨＭＬｉＬｉｗｅｉ（李立伟），ＭａｏＳｈｉｙｉ（毛士艺），ＡｓｉｆＲａｚａ，ＬｉｕＹｉｎｇ（刘莹）（ＤｅｐａｒｔｍｅｎｔｏｆＥｌｅｃｔｒｏｎｉｃＥｎｇｉｎｅｅｒｉｎｇ...     

23NiCo钢的氢脆敏感性研究

采用电解充氢和三点慢弯曲试验方法研究了２３ＮｉＣｏ钢的淬火态以及２００℃、４５０℃、４８２℃和６００℃回火处理的试样的氢脆敏感性。结果表明，２３ＮｉＣｏ钢的氢脆抗力与组织中奥氏体的形态、分布有关。４８２℃回火，在马氏体板条边界形成薄膜状的逆转奥氏体，钢的氢脆抗力有大幅度的提高。此时，延长充氢时间（４～１０ｈ）对断裂行为没有影响。     

热处理真空淬火工艺的应用

超高强度钢在普通空气炉和盐炉中热处理后，零件表面氧化脱碳相对比较厚，再返回机加车间精加工，其高强度给机加带来不便。通过改进热处理工艺，采用保护气氛炉或真空炉淬火，在满足机械性能要求的前提下，实现少、无氧化热处理。     

Height-latitude structure of stationary planetary waves in the stratosphere and lower mesosphere

Daily UK Met Office stratospheric assimilated data for the Northern and Southern Hemispheres, accumulated for the period from 2004 to 2012 and pressure range of 1000–0.1 hPa, are used in this paper. The paper presents and thoroughly discusses spatial–temporal distributions of stationary planetary wave (SPW) amplitudes and phases, calculated on the basis of geopotential height, temperature, zonal and meridional wind data for zonal wave numbers 1 and 2 (SPW1 and SPW2). The climatological planetary wave amplitudes and phases are calculated by extracting waves from three types of data: daily, monthly mean and climatological monthly mean. It has been established that magnitude of amplitudes and height-latitude distribution of amplitudes of SPW1 and SPW2 depend on data processing method for all parameters. It has also been established that height-latitude distribution amplitudes and phases significantly differ for geopotential height, temperature, zonal and meridional wind and depend on wave number and hemisphere. However, height-latitude distributions of phases are little different from each other for the used methods of data processing.     

高速冲液脉冲放电制备纳米硅球

通过Ansys对单脉冲放电过程进行温度分布仿真时发现,当脉宽很小时,汽化体积所占比例很高,即材料利用率较高,但是产率较低;而加大脉宽时,产率较高,但是汽化比例较低。为综合两者的优势,利用大脉宽加工,使放电通道移动。仿真结果表明,相对于放电通道静止,其在材料利用率和产率上都有了大幅度提高。当在加工中引入高速冲液时,实验表明其能促使放电通道发生漂移,收集产物后称量、计算,其产率达到了1g/h。