主燃孔位置对基于RQL高温升燃烧室流动与燃烧特性影响的数值模拟

为将富油燃烧/快速淬熄/贫油燃烧（RQL）用于高温升燃烧室设计，以实现温升与排放的良好统一，对不同主燃孔位置下 的单头部矩形燃烧室流动、淬熄区气流混合、燃烧和排放特性进行数值模拟。结果表明：燃烧室中心回流区的长度和高度随着主 燃孔轴向距离的增大而增大。随着主燃孔轴向距离的增大，主燃孔射流深度增加，射流角度逐渐向下游偏转，导致淬熄区内气流 的混合效果减弱；随着主燃孔位置的后移，富油区内的当量比显著增大，导致CO和碳烟的生成量迅速增加，淬熄区内的沿程高温 区域面积逐渐缩小，燃烧效率逐渐降低。当X/H=0.7时，燃烧室沿程NO生成量始终处在较大值；而当X/H=0.9时，燃烧室沿程NO 生成量始终处于较小值，但CO的生成量增大。     

Blank Panel Design of Integral Wing Skin Panels Based on Feature Mapping Methods

A blank panel design algorithm based on feature mapping methods for integral wing skin panels with supercritical airfoil surface is presented.The model of a wing panel is decomposed into features,and features of the panel are decomposed into information of location,direction,dimension and Boolean types.Features are mapped into the plane through optimal surface development algorithm.The plane panel is modeled by rebuilding the mapped features.Blanks of shot-peen forming panels are designed to identify the effectiveness of the methods.     

远程星际航行补篇

通过一系列变量置换推导出不同喷气速度和不同加速度条件下,计算恒星际飞船加速段的时间和距离的普遍公式及多级火箭加速情况下加速段的时间和距离的公式。最后以天狼星作为航行目标、计算了用5级和10级火箭加速飞行的时间和距离。结果表明,当火箭的级数很多,且各级加速度相等时,其飞行时间与距离非常接近匀加速飞行的情况。     

IMPROVEMENT OF PHASE GRADIENT AUTOFOCUS ALGORITHM

ＩＭＰＲＯＶＥＭＥＮＴＯＦＰＨＡＳＥＧＲＡＤＩＥＮＴＡＵＴＯＦＯＣＵＳＡＬＧＯＲＩＴＨＭＬｉＬｉｗｅｉ（李立伟），ＭａｏＳｈｉｙｉ（毛士艺），ＡｓｉｆＲａｚａ，ＬｉｕＹｉｎｇ（刘莹）（ＤｅｐａｒｔｍｅｎｔｏｆＥｌｅｃｔｒｏｎｉｃＥｎｇｉｎｅｅｒｉｎｇ...     

23NiCo钢的氢脆敏感性研究

采用电解充氢和三点慢弯曲试验方法研究了２３ＮｉＣｏ钢的淬火态以及２００℃、４５０℃、４８２℃和６００℃回火处理的试样的氢脆敏感性。结果表明，２３ＮｉＣｏ钢的氢脆抗力与组织中奥氏体的形态、分布有关。４８２℃回火，在马氏体板条边界形成薄膜状的逆转奥氏体，钢的氢脆抗力有大幅度的提高。此时，延长充氢时间（４～１０ｈ）对断裂行为没有影响。     

Lunar geophysical parameters inversion based on gravity/topography admittance and particle swarm optimization

This paper presents a FORTRAN computer program. The program as code will be used for lunar parameter inversions based on gravity/topography admittance. This will be done by assuming that the lunar lithosphere is modeled as a thin elastic spherical shell. The parameters discussed here include; load ratio, crustal thickness, subsurface load depth, crustal density and elastic lithosphere thickness. The admittance of the best-fitting model can be found through automatically adjusting misfits between one theoretical admittance and an observed one. The results in this paper indicate that this research’s theoretical model is reasonable for exploring the best-fitting parameters. In addition, this code is not only able to automatically and simultaneously calculate the global optimum solution of the parameters studied, but also performs well in computational speed. The code can be easily modified to include more parameter inversions; such as the inversion for subsurface density anomaly and the case of considering infilling material in some lunar mare basins.     

高速冲液脉冲放电制备纳米硅球

通过Ansys对单脉冲放电过程进行温度分布仿真时发现,当脉宽很小时,汽化体积所占比例很高,即材料利用率较高,但是产率较低;而加大脉宽时,产率较高,但是汽化比例较低。为综合两者的优势,利用大脉宽加工,使放电通道移动。仿真结果表明,相对于放电通道静止,其在材料利用率和产率上都有了大幅度提高。当在加工中引入高速冲液时,实验表明其能促使放电通道发生漂移,收集产物后称量、计算,其产率达到了1g/h。     

推进剂重定位过程仿真与分析

为了拓展低温上面级滑行时间，满足深空探测任务需求以及提升运载火箭任务适应性，中国未来型号研制将采用间歇沉底的方案，其主要难点是推进剂重定位过程的研究。本文针对目前重定位仿真多为二维CFD仿真且不能准确合理地预示气泡逸出过程的问题，提出一种基于Flow-3D的三维CFD仿真方法。该方法采用卷气体积与液体体积之比（卷气率）预示气泡逸出过程，比以往采用气泡粒子数预示气泡逸出过程的方法更为合理准确。重定位及气泡逸出过程的仿真结果与半人马座落塔试验的结果具有一致性，捕捉到了重定位过程所有特征流型，且对应时刻误差不超过10%。仿真结果表明间歇沉底推进剂管理方案的可行性，并确定了某低温上面级的相关设计参数。     

Accuracy analysis of GNSS-IR snow depth inversion algorithms

In recent years, with the continuous development of Global Navigation Satellite System (GNSS), it has been applied not only to navigation and positioning, but also to Earth surface environment monitoring. At present, when performing GNSS-IR (GNSS Interferometric Reflectometry) snow depth inversion, Lomb-Scargle Periodogram (LSP) spectrum analysis is mainly used to calculate the vertical height from the antenna phase center to the reflection surface. However, it has the problem of low identification of power spectrum analysis, which may lead to frequency leakage. Therefore, Fast Fourier Transform (FFT) spectrum analysis and Nonlinear Least Square Fitting (NLSF) are introduced to calculate the vertical height in this paper. The GNSS-IR snow depth inversion experiment is carried out by using the observation data of P351 station in PBO (Plate Boundary Observatory) network of the United States from 2013 to 2016. Three algorithms are used to invert the snow depth and compared with the actual snow depth provided by the station 490 in the SNOTEL network. The observations data of L1 and L2 bands are respectively used to find the optimal combination between different algorithms further to improve the accuracy of GNSS-IR snow depth inversion. For L1 band, different snow depths correspond to different optimal algorithms. When the snow depth is less than 0.8 m, the inversion accuracy of NLSF algorithm is the highest. When the snow depth is greater than 0.8 m, the inversion accuracy of FFT algorithm is higher. Therefore, according to the different snow depth, a combined algorithm of NLSF + FFT is proposed for GNSS-IR snow depth inversion. Compared with the traditional LSP algorithm, the inversion accuracy of the combined algorithm is improved by 10%. For L2 band data, the results show that the accuracy of snow depth inversion of various algorithms do not change with the variations of snow depth. Among the three single algorithms, the inversion accuracy of FFT algorithm is better than that of LSP and NLSF algorithms.     

水陆两栖飞机静力试验优化机翼变形的载荷配平

水陆两栖飞机全机静力试验的浮筒着水工况试验中，在试验允许的常规载荷配平方案下，压向大量级水载荷作用于浮筒结构引起机翼较大变形，影响试验精度，因此进行以减少机翼变形为目标的载荷配平研究。将机翼近似为悬臂梁结构，在构建的机翼力学模型基础上应用Green函数建立机翼的挠度曲线方程。首次以考核区域边界肋的挠度和转角为优化目标并建立多目标函数，通过层次分析法和极差变换标准化处理方法将其转化为单目标函数后，采用引入交叉和变异因子的改进蚁群算法进行载荷配平方案优化运算。有限元分析及试验结果显示，优化得到的载荷配平方案可以显著地减少机翼变形，配平载荷不影响考核区域的真实变形，证明了该优化方案的正确性和可行性。