降低PLC系统峰均比的低复杂度改进SLM算法

针对信道慢时变特性及噪声复杂的特点,提出了适用于低压电力线通信的降低峰均比的改进算法.改进算法对原始输入序列中的部分数据进行循环移位来获得一系列不同的新数据序列;在每个新数据序列尾部插入相应的边带信息组成一个输入候选序列;对这一系列不同的输入候选序列分别实施傅里叶反变换,得到不同的输出序列;从中选择峰均比最小的用于传输,达到降低系统峰均比的目的.结果表明:改进算法能够有效地降低系统的峰均比,并且能够获得更好的误码率性能,同时具有比传统选择性映射方法更低的计算复杂度.     

Enhancing buckling capacity of a rectangular plate under uniaxial compression by utilizing an auxetic material

Auxetic materials have previously been shown to enhance various performances due to its unusual property of becoming fatter when uniaxially stretched and thinner when uniaxially com-pressed (i.e., the materials exhibit a negative Poisson’s ratio). The current study focuses on assessing the potential of an auxetic material to enhance the buckling capacity of a rectangular plate under uniaxial compression. The in-plane translational restraint along the unloaded edges that was often neglected in open literature is taken into consideration in our buckling model proposed in this study. The closed-form expressions for the critical buckling coefficient of the rectangle are provided and the predicted results agree well with those determined by the finite element method. Further-more, the results indicate that the buckling performance of a rectangular plate under uniaxial com-pression can be significantly improved by replacing the traditional material that has a positive Poisson’s ratio with an auxetic material when there is in-plane translation restraint along the unloaded edges.     

Evolution of the orbital elements for objects with high area-to-mass ratios in geostationary transfer orbits

A new population of uncatalogued objects in geosynchronous Earth orbits (GEO), with a mean motion of about 1 rev/day and eccentricities up to 0.6, has been identified recently. The first observations of this new type of objects were acquired in the framework of the European Space Agency’s (ESA) search for space debris in GEO and the geostationary transfer orbit (GTO) using the ESA 1-m telescope on Tenerife. Earlier studies have postulated that the perturbations due to the solar radiation pressure can lead to such large eccentricities for GEO objects with a high area-to-mass ratio (A/M). The simulations showed that the eccentricities of GEO objects with large A/M exhibit periodic variations with periods of about one year and amplitudes depending on the value of A/M. The findings of these studies could be confirmed by observations from the ESA 1-m telescope on Tenerife.     

月面高温下推力器可靠性试验

嫦娥五号着陆上升组合体落月后将经历月昼强红外辐射环境，由于推力器喷管导热影响，使推进剂管路与电磁阀面临高温环境，推进系统存在管路内氧化剂汽化和推力器性能下降甚至无法正常工作的问题，影响上升器月面起飞正常姿态控制。为了研究高温下推力器的工作性能，进行了高温下氟塑料阀芯与氧化剂相容性调研，提出了电磁阀和推力器可靠性增长及可靠性验证试验方法，分析了温度与电磁阀阀芯行程的关系，获取了高温环境下推力器的稳态及脉冲工作性能，在小子样条件下评估了推力器可靠性置信下限及月面起飞上升推进系统可靠度，通过月面高温排气及月面起飞上升姿态控制对研究结果进行了航天器在轨飞行验证，圆满完成了上升器月面起飞上升任务。所提出的研究方法及思路具有很好的工程适用性。     

Dynamical evolution of high area-to-mass ratio debris released into GPS orbits

A large set of simulations, including all the relevant perturbations, was carried out to investigate the long-term dynamical evolution of fictitious high area-to-mass ratio (A/M) objects released, with a negligible velocity variation, in each of the six orbital planes used by Global Positioning System (GPS) satellites. As with similar objects discovered in near synchronous trajectories, long lifetime orbits, with mean motions of about 2 revolutions per day, were found possible for debris characterized by extremely high area-to-mass ratios. Often the lifetime exceeds 100 years up to A/M ∼ 45 m²/kg, decreasing rapidly to a few months above such a threshold. However, the details of the evolution, which are conditioned by the complex interplay of solar radiation pressure and geopotential plus luni-solar resonances, depend on the initial conditions. Different behaviors are thus possible. In any case, objects like those discovered in synchronous orbits, with A/M as high as 20–40 m²/kg, could also survive in this orbital regime, with semi-major axes close to the semi-synchronous values, with maximum eccentricities between 0.3 and 0.7, and with significant orbit pole precessions (faster and wider for increasing values of A/M), leading to inclinations between 30° and more than 90°.     

Indicators of black-hole mass and Eddington accretion ratio from QSO X-ray and UV spectra

The evolution of luminous QSOs is linked to the evolution of massive galaxies. We know this because the relic black-holes found locally have masses dependent on the properties of the host galaxy’s bulge. An important way to explore this evolution would be to measure dependences of black-hole masses and Eddington accretion ratios over a range of redshifts, i.e., with cosmological age. For low redshift QSOs (and their lower luminosity Seyfert galaxy counterparts) it has been possible to infer black-hole masses from the luminosities and velocity dispersions of their host-galaxy bulges. These masses agree with those virial black-hole masses calculated from the Doppler widths of the broad Hβ emission lines. The latter method can then be extended to more distant and luminous QSOs, up to redshifts of 0.6 with ground-based optical observations. We discuss ways to extend these explorations to higher redshifts – up to 3 using the widths of QSOs’ broad UV emission lines, and in principle, and to redshifts near 4 from ground-based infrared observations of rest-frame Hβ at 2.5 μm. We discuss the possibility of investigating the accretion history of the higher redshift QSOs using measures of Eddington accretion ratio – the soft X-ray spectral index and the eigenvectors of Principal Components Analyses of QSOs’ UV emission-line spectra.     

UG在高速加工中的应用

高速加工(HSM)具有许多优点，被广泛应用在航空产品的数控加工中。但是使用高速加工技术，不仅要有适合高速加工的设备，选择适合进行高速加工的刀具，更为重要的是选择合理的编程策略。任何编程策略的不合理都会造成严重的后果。所以数控编程一直是高速加工的重点和难点。以UG软件为研究对象，作者提出了实现高速加工的数控编程的策略，并使用高速铣雕设备对生成的NG代码进行了加工，加工结果验证了NG代码是正确的、合理的。说明了采用合理的加工策略，使用UG软件可以实现高速加工的编程。     

边条机翼布局战斗机稳定性改进研究

对边条机翼布局战斗机的纵，横向稳定性改进措施进行了研究，结合具体战斗机布局，给出了边条机翼布局战斗机纵，横向稳定性的一般特征，对前缘襟翼下偏，翼刀，平尾下反和机身截面修形等几种气动布局改进措施的风洞试验结果进行了简要讨论，结果表明，所研究的气动布局改进措施都能有效提高边条机翼布局战斗机的稳定性，其中，前缘襟翼下偏既能完全克服俯仰力矩曲线非线性上翘问题，又能较好地解决横侧向稳定性丧失问题。     

高分影像辅助下的航空高光谱严密几何检校方法

 惯性测量单元(IMU)与传感器视准轴的偏心角和偏心矢量是造成航空线阵列高光谱数据几何校正误差的主要原因之一。在分析偏心角与偏心矢量误差来源之后提出该误差由IMU主轴与传感器主轴的角度偏差、测区固定偏差、GPS中心与传感器投影中心相对偏差组成,在此基础上建立了较为严密的检校模型。针对模型解算时需要大量高精度控制点的问题,提出了一种高分影像辅助下的亚像元精度控制点自动提取方法。通过多地区、多传感器高光谱航测实验表明,亚像元精度控制点能有效提高模型解算精度。新检校模型可获得亚像元校正精度,推扫式传感器——应用型机载成像光谱仪(AISA)建模中误差约为0.39个像元,摆扫式传感器——实用型模块化成像光谱仪(OMIS)建模中误差约为0.23个像元,校正后的影像可直接进行拼接。     

三维数模随动下的机翼结构重量优化

目前,基于快速建模下的重量重心估算系统得到了快速发展。为了进一步提高结构重量估算精度,研究了如何在重量重心快速分析(WCGA)系统环境中构建优化模块。以机翼结构重量优化为例,提出优化流程,对优化模块功能进行分解,给出模型简化要求。以A320飞机机翼为例,对梁和长桁进行优化,结果显示,经过优化,有效减轻了结构重量,且相比于传统的减重优化设计方法,极大提高了计算效率。