用欧拉方程计算机翼与翼身组合体绕流

本文用保角转绘加剪切变换生成三维机翼与翼身组合体Ｃ－Ｈ型网格，并在这类网格拓扑上，用有限体积法研制出可供分析机翼与翼身组合体绕流的三维欧拉方程计算程序。本方法的特色是改进了机翼表面网格点的分布，使机翼后缘与网格线一致；采用了当量机身，使机岙表面到对称面光滑过渡；嵌入了边界层粘性修正。改善了计算结果。数值计算表明，对粘性影响较大的超临界绕流，边界层修正效果显著。     

大攻角非对称流动的非定常弱扰动控制

 研制了一种新的大攻角细长旋成体非对称涡的主动控制技术, 即在细长旋成体头部施加非定常弱扰动来控制头部非对称背涡。应用七孔探针测量的空间截面流场揭示了非定常控制下非对称涡变成对称涡的流态特征。测力试验研究结果表明该方法不仅能完全消除背涡的非对称性及其产生的侧向力, 并且有效控制攻角范围从30b直到80b。     

共轴式直升机旋翼气动干扰对航向操纵的影响

利用共轴式旋翼风洞实验结果，结合轻型共轴式直升机M16飞行中的现象，分析了上下旋翼气动干扰对共轴式直升机过渡飞行中航向操纵的影响。介绍了直升机由悬停转入垂直上升、平飞中加减速和转入爬升与下滑等过程中，由于上下旋翼干扰发生了变化，使直升机航向发生偏转后飞机的反应情况，以及在这种情况下应进行的相应操纵。所得结果对研究共轴式直升机的操稳特性有重要意义。     

直升机涡环状态试验数据处理研究

采用神经网络误差反向传播算法,以旋翼涡环状态试验数据为基础,研究了桨叶负扭度对直升机涡环状态特性的影响,分析了负扭度变化对旋翼扭矩、拉力平均值及脉动幅度的影响。计算结果表明,神经网络模型能够准确预测桨叶负扭度对直升机涡环状态的影响。     

人工释能法求解线性代数方程组

本文建立求解线性代数方程组的人工释能法迭代格式,并给出该迭代格式收敛的充分必要条件和最佳释能时机,同时给出实现人工释能法的数值计算方法及其数值稳定性条件。     

直升机“地面共振”力学模型的探讨

 <正> I_B 桨叶绕垂直铰的转动惯量I_(?),I_(?),I_(?) 机身绕过其重心O的x,y,z 轴的转动惯量ι 桨叶长度m_B 单片桨叶的质量     

A coupling VWM/CFD/CSD method for rotor airload prediction

A coupling fluid-structure method with a combination of viscous wake model(VWM),computational fluid dynamics(CFD) and comprehensive structural dynamics(CSD) modules is developed in this paper for rotor unsteady airload prediction. The hybrid VWM/CFD solver is employed to model the nonlinear aerodynamic phenomena and complicated rotor wake dynamics;the moderate deflection beam theory is implemented to predict the blade structural deformation; the loose coupling strategy based on the ‘delt method' is used to couple the fluid and structure solvers.Several cases of Helishape 7A rotor are performed first to investigate the effect of elastic deformation on airloads. Then, two challenging forward flight conditions of UH-60 A helicopter rotor are investigated, and the simulated results of wake geometry, chordwise pressure distribution and sectional normal force show excellent agreement with available test data; a comparison with traditional CFD/CSD method is also presented to illustrate the efficiency of the developed method.     

A cost driven predictive maintenance policy for structural airframe maintenance

Airframe maintenance is traditionally performed at scheduled maintenance stops.The decision to repair a fuselage panel is based on a fixed crack size threshold,which allows to ensure the aircraft safety until the next scheduled maintenance stop.With progress in sensor technology and data processing techniques,structural health monitoring (SHM) systems are increasingly being considered in the aviation industry.SHM systems track the aircraft health state continuously,lead ing to the possibility of planning maintenance based on an actual state of aircraft rather than on a fixed schedule.This paper builds upon a model-based prognostics framework that the authors developed in their previous work,which couples the Extended Kalman filter (EKF) with a first order perturbation (FOP) method.By using the information given by this prognostics method,a novel cost driven predictive maintenance (CDPM) policy is proposed,which ensures the aircraft safety while minimizing the maintenance cost.The proposed policy is formally derived based on the trade-off between probabilities of occurrence of scheduled and unscheduled maintenance.A numerical case study simulating the maintenance process of an entire fleet of aircrafts is imple mented.Under the condition of assuring the same safety level,the CDPM is compared in terms of cost with two other maintenance policies:scheduled maintenance and threshold based SHM maintenance.The comparison results show CDPM could lead to significant cost savings.     

某型直升机维修保障能力生成模式研究

某型直升机是陆航部队近年来新装备的主力作战机型,目前正处于装备部队初期的故障高发阶段,而部队有限的装备维修保障能力直接制约了该型机战斗力的形成。本文结合前期对某型直升机的自身技术特点及其装备维修保障的研究,综合使用单位反映的各种问题,深入剖析了制约其维修保障能力形成的原因,以期为后续新装备快速形成装备维修保障能力提供借鉴。     

直升机超短波通信链路分析

通过对超短波通信链路的分析,得出直升机超短波通信链路模型;以实现超短波电台通信距离要求为目标,分析通信链路中影响通信距离的各因素及其影响程度,并根据直升机实际情况,对机上配置多部超短波电台及与其他机载设备的电磁兼容性方面提出改善建议。