Tether Satellite System Collision Study

A study was performed to determine the probability of collision with resident space objects and untrackable debris for the tether component of the Tethered Satellite System (TSS) after it broke away from the Space Shuttle orbiter (mission STS-75) in February 1996. Both an analytical and a numerical approach were used in this study, and the results obtained with these two methods were found to be in good agreement. These results show that the deployed tether is expected to have been impacted by several particles 0.1mm or larger in size. The probability of collision with objects 10cm in size or larger was on the order of 10^–3 per month. Since the severed tether reentered within one month after deployment, the collision hazard to other objects while in orbit was small. The analytical methods used in this study are useful for tether collision evaluations in general.     

一种新的四路激光跟踪坐标测量系统的基点标定方法

在激光跟踪三维坐标测量系统中,系统首先要经过标定,才可以进行实际测量。因此系统标定的准确度会直接影响系统最终测量准确度。为了提高标定准确度,提出一种新的标定方法,即利用直线法原理,在优化布局下,采用两路激光干涉仪测量出基点的三维坐标。仿真结果表明目标点相对于基点呈对称分布时,测得的基点坐标准确度比非对称分布时高6到7倍,并通过实验得出了在该优化布局下的基点坐标。     

气体渗碳过程的动态控制

利用气体渗碳物质传递数学模型来仿真计算碳浓度分布，并根据计算结果在计算机上拟合出碳浓度与时间、温度、气氛碳势之间的关系式，此关系式对气体渗碳的动态控制具有指导意义。     

锯齿型扰流片对壁面压力分布的影响

在风洞用电子扫描阀进行测压,研究了绕平板扰流片和锯齿扰流片分离流动的壁面压力分布.结果表明平板扰流片和锯齿扰流片均在上游x/h=-6处剪切层开始分离,并再附于下游x/h≈20的位置.锯齿扰流片横向位置的变化对壁面平均压力分布几乎没有影响,但通过锯齿槽流向的压力脉动一般大于通过锯齿尖点流向的脉动.从平均压力分布看,锯齿高度可以增加扰流片阻流效果,采用锯齿扰流片可以减小下游壁面压力的脉动.     

A first step towards proton flux forecasting

We present a preliminary version of a potential tool for real time proton flux prediction which provides proton flux profiles and cumulative fluence profiles at 0.5 and 2 MeV of solar energetic particle events, from their onset up to the arrival of the interplanetary shock at the spacecraft position (located at 1 or 0.4 AU). Based on the proton transportation model by Lario et al. [Lario, D., Sanahuja, B., Heras, A.M. Energetic particle events: efficiency of interplanetary shocks as 50 keV E < 100 MeV proton accelerators. Astrophys. J. 509, 415–434, 1998] and the magnetohydrodynamic shock propagation model of Wu et al. [Wu, S.T., Dryer, M., Han, S.M. Non-planar MHD model for solar flare-generated disturbances in the Heliospheric equatorial plane. Sol. Phys. 84, 395–418, 1983], we have generated a database containing “synthetic” profiles of the proton fluxes and cumulative fluences of 384 solar energetic particle events. We are currently validating the applicability of this code for space weather forecasting by comparing the resulting “synthetic” flux profiles with those of several real events.     

弓激波前内透射离子动力学横场流静电不稳定性

本文讨论了地球弓激波前内背景电子速度分布函数为平顶形式时的透射离子横场流静电不稳定性.结果表明,在超临界(Alfvén Mach数M_A>3)准垂直激波区(激波法向与行星际磁场之间的夹角75°)情况下,透射离子流产生的静电不稳定性增长率峰值要比电子速度为Maxwell分布时更加显著,并满足动力学性质.     

低密度小喷管流场的DSMC直接模拟

用ＤＳＭＣ方法数值模拟了低密度轴对小喷管的流场流动，获得了相应的结果，并将所得结果与用差分求解Ｎ－Ｓ方程方法获得的结果进行了对比，二者吻合较好。     

旋转涡轮盘腔中等转速下内部流场分布实验

1引言航空发动机性能的不断提高使得涡轮前温度也越来越高,这就给涡轮的冷却技术提出了更高的要求。在现代航空发动机中,从压气机引出的压缩空气一部分用来冷却涡轮叶片和涡轮导向叶片,另外一部分用来冷却和密封涡轮盘,掌握涡轮盘腔冷却系统内气流的运动规律是对航空发动机高温     

同向旋转盘间换热特性的实验研究

本文将实际发动机高、低压涡轮盘简化成几何形状相对简单的中心轴向进气、径向出气、两盘以不同速度同向旋转的旋转盘系统。用实验方法研究了冷气流量、转速以及两盘间隙对旋转盘间换热的影响规律,并对结果进行了相应的分析。     

三维瞬态导热温度场边界元计算及一阶数学奇异的处理

推导了三维瞬态导热温度场边界元解法的积分方程和离散代数方程，并编制了相应的计算机程序，采用坐标变换的解析消去法，处理边界元的一阶数学奇异点，从而提高了算法的数值精度。用本程序计算了正方体和圆柱环瞬态导热温度场，数值解与解析解的吻合程度令人满意。