中国深空网首次△DOR联合测轨试验分析

通过分析中国深空网首次△DOR（Delta Differential One way Ranging,双差分单向测距）联合测轨试验的干涉测量事后数据,重点从观测量随机精度、闭合时延等方面讨论了国内深空网与国内VLBI（Very Long Baseline Interferometry,甚长基线干涉测量）观测网、国内深空网与国际深空网的联合干涉处理情况,并与ESOC（European Space Operation Center,欧洲空间操作中心）数据处理结果进行了比对.试验结果表明：我国深空网已具备独立或联合开展深空探测器导航测轨的系统支持能力;深空站系统具备高速率数据接收、采集、记录、传输能力,采集数据处理精度优于1 ns;深空网干涉测量信号处理中心具备多体制信号的干涉处理分析能力,其分析精度与ESOC处理精度差异在0.1 ns量级.     

灯丝放电磁场约束型原子氧效应地面模拟试验设备

介绍了用于原子氧剥蚀效应研究的灯丝放电磁场约束型地面模拟设备 ( IFM)的构成及工作原理,简单阐述了装置的运行测量结果,分析了等离子体参数随试验条件的变化趋势。并用 IFM设备对 Kapton空间用材料进行了地面模拟试验,试验结果与国外空间飞行暴露试验结果相似     

太阳帆航天器行星际轨道转移优化算法

研究基于遗传算法的太阳帆行星际转移轨道的全局优化问题.通过极小值原理推导了太阳帆全局优化控制律,并以太阳帆飞行时间最短为优化目标函数,运用遗传算法对发射时间、到达时间和协态变量初值进行参数优化设计.为了解决轨道转移这一多约束优化问题,在遗传算法中加入动态罚函数.在此理论基础上作了从地球同步轨道出发到火星同步轨道转移和从地球出发与火星交会两个算例,仿真结果表明了该方法在太阳帆转移轨道全局优化中的有效性.     

Precise orbit determination and precision comparison for FY3C and FY3D with receiver antenna GPS and BDS PCV using spaceborne BDS and GPS observation data

The FY3C and FY3D satellites were equipped with global navigation satellite occultation detector (GNOS) receivers that received both GPS and BDS-2 signals. For further improving precise orbit determination (POD) precisions, we estimated receiver GPS and BDS signal phase center variations (PCV) models with 2° and 5° resolutions and set the different weights for GPS and BDS-2 observations in the combined POD. The BDS-based POD precision using BDS-2 satellite antenna phase center offset (PCO) values from the China Satellite Navigation Office (CSNO) are not as accurate as those obtained from the International GNSS Service (IGS) Multi-GNSS experiments project (MGEX). The estimated receiver GPS and BDS PCV models with 2° and 5° resolutions were estimated from the GPS phase residuals of GPS-based POD and BDS phase residuals of combined POD, respectively. In most cases, the POD precisions using the estimated PCVs with 2° resolution are superior to those with 5° resolution. The precisions of the BDS-based POD and combined POD were both improved by introducing the receiver BDS PCV models. The weighting for GPS and BDS-2 observations can further improve the precision of the combined POD. The tested results of selected weights are better than those with equal weight in the combined POD. The experiment results show that orbital precisions of FY3C are worse than those of FY3D.     

基于SOC的卫星姿轨控系统通用电模拟器设计

在某型卫星地面电联试过程中,对该卫星的姿态轨道控制系统进行接口分析及信号统计,针对其接口复杂性、信号多样性的特点,提出采用片上系统(Systemona Chip,SOC)芯片对所有部件模拟器进行通用化设计。文中给出了该型卫星通用型电模拟器硬件平台设计方案以及陀螺、反作用轮和通用接口模块的硬件配置说明,针对该型卫星姿态轨道控制系统电联试要求,对所有部件按真实接口配置成电模拟器,形成通用接口箱、敏感器电模拟器箱和执行机构电模拟器箱,并通过CAN(Controller Area Network)总线接入闭环仿真,对太阳捕获、地球捕获及正常模式进行了仿真测试,仿真结果表明通用电模拟器满足设计要求,对其他卫星的地面电联试有很好的参考价值。     

Onboard orbit determination using GPS observations based on the unscented Kalman filter

Spaceborne GPS receivers are used for real-time navigation by most low Earth orbit (LEO) satellites. In general, the position and velocity accuracy of GPS navigation solutions without a dynamic filter are 25 m (1σ) and 0.5 m/s (1σ), respectively. However, GPS navigation solutions, which consist of position, velocity, and GPS receiver clock bias, have many abnormal excursions from the normal error range for space operation. These excursions lessen the accuracy of attitude control and onboard time synchronization. In this research, a new onboard orbit determination algorithm designed with the unscented Kalman filter (UKF) was developed to improve the performance. Because the UKF is able to obtain the posterior mean and covariance accurately by using the second-order Taylor series expansion through the sampled sigma points that are propagated by using the true nonlinear system, its performance can be better than that of the extended Kalman filter (EKF), which uses the linearized state transition matrix to predict the covariance. The dynamic models for orbit propagation applied perturbations due to the 40 × 40 geo-potential, the gravity of the Sun and Moon, solar radiation pressure, and atmospheric drag. The 7(8)th-order Runge–Kutta numerical integration was applied for orbit propagation. Two types of observations, navigation solutions and C/A code pseudorange, can be used at the user’s discretion. The performances of the onboard orbit determination were verified using real GPS data of the CHAMP and KOMPSAT-2 satellites. The results of the orbit determination were compared with the precision orbit ephemeris (POE) of the CHAMP and KOMPSAT-2 satellites.     

太阳帆日心定点悬浮转移轨道设计

研究了太阳帆航天器日心定点悬浮轨道(HFDO)的转移轨道设计问题,以球坐标形式建立了太阳帆的动力学模型,基于该模型给出在日心悬浮轨道基础上实现定点悬浮的条件,提出了一种实现日心定点悬浮的转移轨道设计方法。首先,确定定点悬浮的位置;然后,设计经过该位置的绕日极轨轨道;最后,实施轨道减速实现定点悬浮,并给出了解析形式的轨道控制律。结合太阳极地观测任务,设计了定点悬浮在太阳北极1AU处的太阳帆转移轨道。仿真结果表明:该轨道转移方案总耗时3.5年,太阳帆定点到黄北极距日心1AU处,此后只要保持太阳光垂直照射帆面,即可维持稳定的悬浮状态。     

超低轨道卫星应用离子电推进技术方案

低地球轨道大气环境对诸如科学探测和对地观测卫星的阻尼作用十分明显,而且阻尼随太阳和地磁活动以及昼夜、季节交替变化范围宽.为了保证卫星轨道精度或飞行状态满足任务要求,需要利用推进系统对卫星受到的阻尼进行实时或间歇式补偿以实现轨道或飞行状态的保持.针对轨道高度220～268 km的无拖曳飞行和轨道维持应用,基于卫星轨道阻尼...     

自主机动条件下的实时定轨方法

中继卫星在跟踪自主机动用户目标时,由于机动轨道未知,需要利用中继卫星下传的星载GNSS(Global Navigations Satellite System,全球导航卫星系统)数据进行实时轨道确定与预报,为中继卫星跟踪提供实时的引导信息,以方便中继卫星快速捕获目标和连续稳定跟踪。针对该类用户目标的任务需求,讨论了基于星载GNSS数据自主机动条件下的实时定轨方法,建立了连续推力机动力学模型。以某一型号卫星的实测数据进行分析验证,并对轨道机动进行辨识,计算的机动加速度和机动时间与试验单位提供的结果一致。针对卫星不同机动情况,5min的观测数据定轨预报10min的弧段,最大位置误差小于8km,可以为中继卫星快速捕获提供高精度的引导信息。