力值加载装置控制系统设计

针对力标准机不适用于力值现场校准测试的问题,设计了一种便携式的力值加载装置。该装置采用STM32F103为主控单片机,采用高准确度AD转换器测量力值,优化了力值加载控制算法,避免了力值加载过程中可能出现的各种问题。该装置控制速度快,准确度高,适用于力值现场校准测试。     

编队对地攻击作战效能分析

以马尔可夫理论为基础,运用全概率公式建立了飞机编队对地攻击的动态模型;评估了任务成功率等作战效能指标;给出了飞机对地攻击作战效能的计算实例。结果表明所建模型客观描述了对地攻击作战的实质。     

一类非线性系统的混沌控制

 描述航天器、陀螺和气浮台等刚体姿态运动的欧拉动力学方程,是一个具有广泛代表意义的三阶非线性方程。当该方程中的参数取不同值时,可得到著名的Lorenz系统、Rssler系统、Newton-Leipnik系统、Chen系统及Lü系统。在不同的外力矩作用下,该动力学系统会呈现出相当复杂的动力学行为。从该系统中,发现了一大类新的混沌吸引子。本文分析了这一类混沌吸引子具有的共同特征,并采用基于输出反馈的PI型控制器将一种新的混沌运动稳定于指定平衡点。仿真结果表明,该控制器能够有效地抑制混沌,能将系统稳定于任意指定的不稳定平衡点。     

A Novel Onboard-gateway-based Mechanism to Improve TCP Performance in Aeronautical Satellite Networks

The IP-based networks on aircraft serve to support Internet services via satellites. However, in aeronautical satellite hybrid net- works,the TCP protocol performance often deteriorates due to improper decreases and slow recovery of the congestion window. This paper proposes a window size determination and notification mechanism, onboard-gateway-based mechanism (OGBM), which is based on the onboard gateway in the networks on aircraft. A cross-layer approach is adopted by the onboard gateway to obtain the satellite link bandwidth information. And then, by the gateway, through changing the receiver’s advertised window field in ACK packets, TCP sources are notified of the window size of each TCP source calculated on the ground of bandwidth delay product and flow numbers. The mechanism is able to avoid improper changes of TCP window and serve multiple users. Simulation results show that the mechanism with the fairness index close to 1 improves TCP performance in aeronautical satellite networks.     

Simulation and Analysis of Crashworthiness of Fuel Tank for Helicopters

Crashworthiness requirement of fuel tanks is one of the important requirements in helicopter designs. The relations among the protection frame, textile layer and rubber layer of the fuel tank are introduced. Two appropriate FE models are established, one is for an uncovered helicopter fuel tank without protection frame, and the other is for fuel tank with protection frame. The dynamic responses of the two types of fuel tanks impinging on the ground with velocities of 17.3 m/s are numerically simulated for the purpose of analyzing energy-absorbing capabilities of the textile layer and protection frame. The feasibility of the current crashworthiness design of the fuel tank is examined though comparing the dynamic response behaviors of the two fuel tanks.     

Autonomous Control Reconfiguration of Aerospace Vehicle Based on Control Effectiveness Estimation

未来空天飞行器跨空天两域飞行,要求有较高的自主性以适应由故障和环境变化带来的不确定因素。针对空天飞行器的不确定性,提出了自主控制重构方案。研究了线性模型的时变控制效益的估计方法,提出并证明了效益矩阵可估计的充分条件,给出了相应的算法并证明了其收敛性和对噪声的鲁棒性;提出了基于线性规划和模糊逻辑的控制分配算法,通过冗余效应器实现了不确定条件下的自主控制重构。系统集成和仿真结果分析验证了方案和算法的有效性。     

An improved numerical method for constructing Halo/Lissajous orbits in a full solar system model

An improved numerical method that can construct Halo/Lissajous orbits in the vicinity of collinear libration points in a full solar system model is investigated. A full solar system gravitational model in the geocentric rotating coordinate system with a clear presentation of the angular velocity relative to the inertial coordinate system is proposed. An alternative way to determine patch points in the multiple shooting method is provided based on a dynamical analysis with Poincare′sections. By employing the new patch points and sequential quadratic programming, Halo orbits for L_1, L_2, and L_3 points as well as Lissajous orbits for L_1 and L_2 points in the EarthMoon system are generated with the proposed full solar system gravitational model to verify the effectiveness of the proposed method.     

单推力航天器交会对接轨迹规划及跟踪控制

针对单推力航天器交会对接问题,提出一种轨迹规划及跟踪算法。首先,考虑到追踪航天器只沿本体X轴安装推力器,且推力方向固定,为了实现从起始位置转移至期望位置并满足姿态要求,基于三维螺旋线设计两阶段转移轨迹,根据初末位置以及末端速度方向要求,求解螺旋线参数。该螺旋线可以保证在初末速度方向固定情况下,曲率积分最小。其次,为了降低轨迹跟踪难度并减小初始时刻的位置跟踪控制力,需要将转移轨迹初始速度与追踪星X轴重合。传统螺旋线无法满足该约束条件。本文对传统螺旋线进行改进,提出一种旋转螺旋线轨迹设计方法。通过引入姿态旋转矩阵,将螺旋线在三维空间旋转,在不改变曲线形状的前提下满足初末位置及速度方向要求。然后,为了跟踪转移轨迹以及跟踪期望推力方向,提出基于CLF（Control Lyapunov Function）的滑模控制策略,当追踪星X轴与期望推力方向夹角较大时,采用CLF,保证最优性;当姿态误差收敛至滑模面附近时,切换为滑模控制,以提升系统鲁棒性。最后,通过仿真验证旋转螺旋线相比于传统螺旋线的优势。     

基于IPSO-Elman神经网络的飞机客舱能耗预测

为了提高飞机客舱使用地面空调制冷时客舱能耗的预测精度,提出了一种改进的粒子群优化（IPSO）Elman神经网络的飞机客舱能耗预测模型。依据对算法中惯性权重与学习因子的收敛域分析,得出了二者合理的取值范围,将粒子到全局最优位置间距离与参数的取值范围相结合,构造了惯性权重与学习因子的动态调节函数,对其进行非线性的动态调节,并引入了变异因子,提出了一种跳出局部最优的策略,防止粒子群优化（PSO）陷入局部最优。将IPSO-Elman应用于Boeing738飞机客舱能耗预测中,与PSO-Elman、Elman算法进行性能比较,仿真结果表明基于IPSO-Elman的客舱能耗预测模型在预测精度和收敛速度方面均有一定的提升。该研究结果为飞机客舱能耗预测模型的建立提供了理论依据,对飞机地面空调的节能与机场电能合理调配提供了支持。     

鸭式布局飞机矢量喷流对地面效应影响的风洞试验

针对单发鸭式布局飞机,通过低速风洞试验,研究了矢量喷流对飞机地面效应的影响特性。研究结果表明：发动机喷流使得飞机的地面效应增强,升力系数增加,降低飞机起飞/降落时的飞行速度,缩短起降距离,从而改善飞机起降性能。发动机喷管上/下偏转时,矢量喷流对飞机上下表面气流诱导不对称,均使地面效应阻力系数增量减小。在此基础上,基于数值模拟结果对喷流与地面效应的相互作用机理进行了分析。