可压缩流体恒温热线风速仪校准方法

开展了恒温(CT)热线风速仪校准方法的研究,以满足可压缩流体中湍流度测量需求。将对数函数与多元回归技术相结合,建立了恒温热线风速仪校准的数学模型,并进行了风洞湍流度测量试验验证。在马赫数Ma=0.3~0.55范围内进行了校准试验,根据建立的数学模型对试验数据进行拟合,拟合优度R2=0.999 82,平均绝对速度偏差Δu=0.18m/s,基本满足了恒温热线风速仪校准精度要求。对马赫数Ma=0.55条件下流场进行了湍流度测量,速度测量偏差为0.034%,流场湍流度Tu=0.14%。试验结果证明了恒温热线风速仪应用于可压缩流体速度测量的可行性。     

Development of a coupled supersonic inlet-fan Navier–Stokes simulation method

A coupled supersonic inlet-fan Navier–Stokes simulation method was developed by using COMSOL-CFD code. The flow turning, pressure rise and loss effects across blade rows of the fan and the inlet-fan interactions were taken into account as source terms of the governing equations without a blade geometry by a body force model. In this model, viscous effects in blade passages can also be calculated directly, which include the exchange of momentum between fluids and detailed viscous flow close to walls. NASA Rotor 37 compressor test rig was used to validate the ability of the body force model to estimate the real performance of blade rows. Calculated pressure ratio characteristics and the distribution of the total pressure, total temperature, and swirl angle in the span direction agreed well with experimental and numerical data. It is shown that the body force model is a promising approach for predicting the flow field of the turbomachinery. Then, coupled axisymmetric mixed compression supersonic inlet-fan simulations were conducted at Mach number 2.8 operating conditions. The analysis includes coupled steady-state performance, and effects of the fan on the inlet. The results indicate that the coupled simulation method is capable of simulating behavior of the supersonic inlet-fan system.     

Variable stiffness design of redundantly actuated planar rotational parallel mechanisms

Redundantly actuated planar rotational parallel mechanisms (RAPRPMs) adapt to the requirements of robots under different working conditions by changing the antagonistic internal force to tune their stiffness. The geometrical parameters of the mechanism impact the performances of modulating stiffness. Analytical expressions relating stiffness and geometrical parameters of the mechanism were formulated to obtain the necessary conditions of variable stiffness. A novel method of variable stiffness design was presented to optimize the geometrical parameters of the mechanism. The stiffness variation with the internal force was maximized. The dynamic change of stiffness with the dynamic location of the mechanism was minimized, and the robustness of stiff-ness during the motion of the mechanism was ensured. This new approach to variable stiffness design can enable off-line planning of the internal force to avoid the difficulties of on-line control of the internal force.     

发动机电子调节器防消喘通道检测系统

介绍了某型发动机综合电子调节器防消喘通道检测系统的硬件、软件结构设计及测控功能的实现。实验表明，基于ATLAS的检测系统能够迅速准确地对该通道进行检测和维护，具有较广的应用价值，可用于发动机综合电子调节器的建模仿真与研究。     

多点静压落差法在风洞稳速压控制系统中的分析与应用

先介绍了两种测量风洞稳速压控制系统风速反馈值的常用方式-单点风速测量法和多点静压落差法,并对其特点和应用场合进行了分析;然后对多点静压落差法进行数学建模,给出了静压落差与风洞试验段中心点风速的关系;最后用一个工程实例说明此方法在实际风洞设计中的应用。     

粘度单位的换算

介绍了动力粘度，运动粘度，条件粘度的国际单位制、物理单位制以及相互之间的换算关系。     

卫星天线反射面板热形变面形误差检测方法

为实现航天卫星天线面板热形变面形误差高精度检测,提出利用三坐标测量系统搭载高精度激光位移传感器,对检测对象进行扫描测量;并通过对其系统误差来源进行分析、公差合理分配及误差控制,提出对测量系统进行整体优化,以满足所提出检测精度要求。为验证所提出方法的可行性,搭建测量系统,对标准试件的测量数据进行面形拟合,获得测量偏差优于±4.22μm/m2;分别制作常规铝板及光滑铝板作为测试对象,在其背部黏贴加热板的加热方式,以模拟卫星面板在实际工作环境中发生热形变。采用提出的方法对其进行了热形变面形误差检测实验,检测结果验证了所提出方法的可行性。     

固定小翼颤振激励系统激励力建模研究

通过基于双时间方法求解非定常欧拉方程得到固定小翼激励力源数据,分析了这种新型颤振激励系统工作原理,对固定小翼新型颤振激励系统工作原理的分析,建立了激励力简化计算模型。可实现M=0.3～0.5飞机稳定飞行状态下激励力载荷计算,大大简化了计算过程,精度足够满足工程分析,可满足试飞数据实时处理的需要。     

测量质量工程技术在计量管理中的应用

测量质量工程技术是日本著名质量工程学专家田口玄一博士创立的一门新的工程技术(也称田口方法)在测量领域中的具体应用.它对提高计量管理水平,促进企业经济效益是非常有益的.本文着重介绍了这一新技术运用到计量管理中的几项突出表现.     

高超声速流的电子束诊断法(英文)

本文描述用电子束辉光法测量高超声速流中平均密度、速度以及密度变化特征的物理原理和过程。对此法用于平板上激波层稳定性问题的适用范围和限制条件作了分析。内容通过风洞实验结果加以说明。