树脂砂低压铸造工艺研究与应用

研究了树脂砂低压铸造工艺理论与原理,结合工艺试验得到了铝合金ZL104涡轮泵出口管树脂砂低压铸造工艺规范。采用该工艺规范制造的铝合金ZL104涡轮泵出口管已用于CZ-5和CZ-7运载火箭液氧煤油液体火箭发动机之中,CZ-5和CZ-7运载火箭已通过了飞行考核,液氧煤油液体火箭发动机工作正常。由此表明:铝合金ZL104涡轮泵出口管树脂砂低压铸造工艺是合理、正确和有效的。     

舵机滚珠丝杠在内部热源作用下响应特性

舵机滚珠丝杠在运行过程中由于摩擦作用和电机运行产生的内部热源会导致其结构温度上升和变形,是影响滚珠丝杠副运行精度的因素之一。本文基于有限元理论建立舵机滚珠丝杠副模型,并通过在ANSYS Workbench中插入命令流的方式实现了在滚珠丝杠上施加移动摩擦热载荷,获得了滚珠丝杠副在内部热源作用下的温度、变形和应力响应特性。结果表明:滚珠丝杠轴向热流密度呈双峰趋势,且其高温区域主要集中在螺母行程范围内的中间区域;随着转速的增加,滚珠丝杠各处温度及其波动幅度加大;丝杠最大热应力位于与轴承配合的轴肩最外侧处。     

高超声速轴对称模型密度场的激光全息干涉测量

激光全息干涉技术在 2 0 0m自由飞弹道靶的初步应用中 ,对高速和高超声速的轴对称模型周围气流密度场定量测量进行了初步探索。给出了 M =2 .2的弹头和M =2 .45、Φ =2 0mm的球标模以及M =9.35的钝锥模型的全息干涉图和处理结果 ,同时与钝锥模型的理论数值计算结果进行了比较 ,首次在弹道靶上获得了流场密度的定量结果。     

基于工业物联网的混流车间机器人自适应调度

随着工业物联网技术与人工智能技术深度融合,物料机器人已广泛应用于物联网车间中.针对车间存在实时动态变化和状况不确定等诸多复杂因素,本文提出以组分层建树和以实时状态为根节点的SP–MCTS(Single-player monte-carlo tree search algorithm)搜索方法实现车间自适应调度决策.该方...     

Investigation on surface roughness,residual stress and fatigue property of milling in-situ TiB2/7050Al metal matrix composites

For higher efficiency and precision manufacturing, more and more attentions are focused on the surface roughness and residual stress of machined parts to obtain a good fatigue life. At present, the in-situ TiB₂/7050Al metal matrix composites are widely researched due to its attractive properties such as low density, good wear resistance and improved strength. It is of great significance to investigate the machined surface roughness, residual stress and fatigue life for higher efficiency and precision manufacturing of this new kind material. In this study, the surface roughness including two-dimensional and three-dimensional roughness, residual stress and fatigue life of milling in-situ TiB₂/7050Al metal matrix composites were analyzed. It was found from comparative investigation that the three-dimensional surface roughness would be more appropriate to represent the machined surface profile of milling particle reinforced metal matrix composites. The cutting temperature played a great role on the residual stress. However, the effect of increasing cutting force could slow down the transformation from compressive stress to tensile stress under 270 °C. An exponential relationship between three-dimensional roughness and fatigue life was established and the main fracture mechanism was brittle fracture with observation of obvious shellfish veins, river pattern veins and wave shaped veins in fracture surface.     

运动的核弹比静止的核弹威力小?——多普勒效应、红移、光行差和动体的质能当量关系

证明爱因斯坦立足于光速不变假设和长度收缩假设的洛伦茨变换未能正确地解释多普勒效应、红移和光行差现象;他也未能给出正确的动体的质能当量关系.作者立足于完全符合相对性原理的伽利略变换,成功地解决了上述问题.     

某型教练机起落架信号电路改进设计

针对某型教练机存外场使用时出现起落架未放到位，而飞行员却没能及时发现的问题，本文对飞机起落架信号电路进行了分析，并提出了相应的改进措施。     

频域盲源分离的非圆信号推广

作为盲源分离（BSS）问题的最有效解决方法之一,独立分量分析（ICA）算法可以分为时域和频域算法两类.将时域盲源分离的快速算法推广到频域,通过在频域中应用非圆信号的伪协方差矩阵,推导出一个新的固定点算法来解决线性瞬时混合的非圆信号盲源分离（BNSS）问题.仿真实验验证了该算法的有效性.     

A straw-soil co-composting and evaluation for plant substrate in BLSS

Material closure is important for the establishment of Bioregenerative Life Support System, and many studies have focused on transforming candidate plant residues into plant culture medium. For the limitations of using wheat straw compost as substrate for plant cultivation, a straw-soil co-composting technique was studied. The changes of pH, C/N value, germination index, cellulose, lignin and so on were monitored during the co-composting process. The maturity was evaluated by the C/N value and the germination index. The result showed that after 45 days’ fermentation, the straw-soil final co-compost with inoculation (T1) became mature, while the co-compost without inoculation (T0) was not mature. In the plant culture test, the T1 substrate could satisfy the needs for lettuce’s growth, and the edible biomass yield of lettuce averaged 74.42 g pot⁻¹ at harvest. But the lettuces in T0 substrate showed stress symptoms and have not completed the growth cycle. Moreover, the results of nitrogen (N) transformation experiment showed that about 10.0% and 3.1% N were lost during the T1 co-composting and plant cultivation, respectively, 23.5% N was absorbed by lettuce, and 63.4% N remained in the T1 substrate after cultivation.     

基于模型的载人航天器研制方法研究与实践

载人航天器具有系统规模大、技术难度高、单件小批量、无法通过多次飞行持续完善设计、可靠性要求高等特点。当前载人航天器研制中仍存在着参数化和模型化程度不高、基于模型的系统综合仿真验证不足、研制各环节缺乏数字化集成等问题，传统基于文本的系统工程方法已无法满足研制需求，亟需采用基于模型的系统工程方法。本文针对载人航天器的研制现状和应用需求，提出了面向载人航天器全生命周期的模型体系，定义了需求模型、功能模型、产品模型、工程模型、制造模型、实做模型等六类模型，提出了基于模型的研制流程，包含系统设计闭环验证、产品设计闭环验证、实做产品闭环验证3个验证环节，并深入探索了各研制环节中不同模型间的传递与关联关系。以某型号载人航天器为应用基础，系统地验证了提出的方法。