抗尾流干扰的自动着舰非线性控制研究

由于飞机与尾流模型的非线性,为实现自动精确着舰,探究了具有尾流抑制能力的非线性控制器设计方法.基于气流扰动影响的飞机六自由度非线性模型,利用非线性动态逆控制方法对各控制回路进行了设计,为抑制尾流扰动,提出了应用非线性观测器进行补偿的方法.仿真结果表明,具有非线性干扰观测器的控制器可以在4s内使飞机稳定在速度为52.04 m/s,并使航迹角保持在±0.5°变化范围内,最终的着舰侧向偏差为-0.13m.     

KrF激光对高速飞片的驱动特性研究

利用诱导空间非相干技术平滑的KrF准分子（248nm）激光驱动带有烧蚀层的平面靶，研究激光空间均匀性对产生完整飞片的影响，结果表明激光不均匀性在2％以下，能够产生完整的高速飞片，且完整飞片能够维持20ns以上不破裂；当激光不均匀性达到5％，激光引入流体力学不稳定性种子应很强，冲击波在靶内输运过程中不稳定性不断发展增强，到靶背时强到足以使飞片解体甚至气化，不能产生完整的飞片。为了获得尽可能高的飞片速度，采用激光与烧蚀层参数不匹配方法，使冲击波对飞片作多次加速。利用功率密度为1012 W/cm2的KrF激光与含50μm Kapton烧蚀层的5μm铝飞片作用，得到速度约10km/s的高速飞片，与模拟结果吻合得很好。     

舰载机CRM培训体系研究

针对人为因素对航空安全的影响,介绍了目前世界各航空大国广泛开展的机组资源管理（CRM）的涵义,探究了CRM训练在军用航空中的发展与应用,提出了构建舰载机CRM培训体系的设想,为国产舰载机的安全飞行提供了一定的参考。     

基于DDMZM的星载微波光子混频器设计

微波部件由于分布式参数的影响，存在一定的频率选择性，难以实现宽带多频段兼容的变频系统，已不能满足高通量星载通信载荷的需求。微波光子技术以其大带宽和无频率选择性的优势为高通量天基通信需求的实现提供了可能性。基于双驱动马赫增德尔调制器(DDMZM）对星载通信转发设备混频单元的方案进行探索，通过理论分析链路模型，使用VPI软件对链路进行仿真优化来寻找DDMZM的最佳偏置点。试验结果表明调制器偏置在最小点时，变频效率高，且具有一定的载波抑制功能，可实现宽带、多频段以及抗干扰等性能，优于微波变频性能。     

Fuzzy multi-criteria decision-making approach to prioritization of space debris for removal

As private companies and government space agencies begin to seriously consider the task of active space debris removal, it is becoming increasingly more important to determine the highest priority objects to deorbit. This work sets forth an approach for prioritization of space debris through the utilization of Multi-Criteria Decision-Making methodologies and fuzzy logic, as well as both quantitative and qualitative criteria. The proposed debris prioritization approach considers various criteria including the orbit, size, mass, pairwise and total collision probabilities, and decay timeframe of each debris object. The means of assigning attributes to each assessment criterion is discussed in detail. To determine the weighting scheme for the criteria, a questionnaire was prepared and shared with experts in the field of space situational awareness. The work examines over two thousand critical debris objects selected from the existing debris catalog with respect to these criteria. The quantified attributes for each debris object are then aggregated through the fuzzy versions of the Analytic Hierarchy Process and the Technique for Order Preference by Similarity to Ideal Solution. The results of the analysis identify high-priority debris objects for removal from Earth-bound orbits.     

Evaluation of a Geiger-mode imaging flash lidar in the approach phase for autonomous safe landing on the Moon

The imaging flash lidar has been considered as a promising sensor for the future space missions such as autonomous safe landing, spacecraft rendezvous and docking due to its ability to provide a full 3D scene with a single or multiple laser pulses. The linear-mode flash lidar has been developed and demonstrated for an autonomous safe landing on the Moon in order to provide an accurate distance measurement to the landing site and its 3D image. Yet, the Geiger-mode flash lidar has also been recognized as an emerging technology for the space missions because it is highly sensitive even to a single photon and provides the very accurate timing of photon arrival. In this study, the performance of the Geiger-mode flash lidar is simulated in the approach phase and evaluated for the autonomous landing on the Moon. Furthermore, a new statistical signal processing algorithm is proposed to remove the noise counts in order to obtain the 3D image from a sequence of laser pulses in the situation of the fast moving spacecraft. The algorithm is shown to be effective for the autonomous landing due to its ability to remove noise events under the condition of low signal-to-noise ratio and improve ranging accuracy.     

载人月面着陆及起飞技术初步研究

载人登月任务中最具特色的就是载人月面着陆及起飞过程,其技术体系丰富,是影响载人登月任务成败的关键环节。文章详细分析了载人月面着陆及起飞阶段的飞行方案,阐述了载人任务与无人任务设计准则上的区别,剖析了载人月面着陆及起飞技术的内涵。此外重点分析了低温推进剂蒸发量控制技术、10∶1深度变推力液体发动机技术、发动机推力矢量控制技术、大承载着陆缓冲技术、发动机羽流导流与防护技术、月尘清除及防护技术等六项与载人登月舱推进系统和结构系统相关的关键技术,分析提出了相应的技术途径和解决方案,对深入认识载人登月飞行器系统的技术体系及技术难度具有重要意义。     

电压控制型脉宽调制（PWM）器件电参数的全面测试

介绍了电压控制型PWM器件(以下简称PWM器件)的功能结构及测试难点。提出了该类器件电参数的测试方案及实现方法。基于SP3160Ⅱ大规模混合集成电路测试系统软硬件资源,实现了PWM器件电参数的全面测试。重点阐述了误差放大器测试环路设计及输出驱动器电平测试的新方法。     

直升机滑橇式起落架非线性有限元分析

本文采用MSC／NASTRAN分析软件对某直升机滑橇式起落架进行了弹塑性，大变形非线性分析，并与静力试验进行对比，理论计算与产测结果相当吻合，验证了理论分析的可靠性。     

微型可编程控制器温度测控系统

本文叙述了一个由微型可编程控制器ＩＰ－１６１２构成的温度测控系统，在介绍ＩＰ－１１６１２ＰＬＣ特性的基础上，讨论了用它构成温度测控系统的基本原理、电路结构和编程方法。最后提出有关ＰＬＣ应用问题的几点看法。