基于距离相关分析的航空维修差错影响因素分析

针对一般航空维修差错因素分析中只将相关因素各自独立分析,并将其影响程度进行排序分析方法的局限性,对航空维修差错因素的分类和综合分析,建立基于距离相关分析的航空维修差错影响因素综合分析模型,并通过实例数据分析计算得出航空维修差错相关系数,该相关系数可应用于航空维修差错影响因素的综合关联分析,将航空维修差错因素间的相关性以相关系数定量表示,弥补了传统方法单一性的缺陷.     

Study of seasonal and long-term vertical deformation in Nepal based on GPS and GRACE observations

Lithospheric deformation signal can be detected by combining data from continuous global positioning system (CGPS) and satellite observations from the Gravity Recovery and Climate Experiment (GRACE). In this paper, we use 2.5- to 19-year-long time series from 35 CGPS stations to estimate vertical deformation rates in Nepal, which is located in the southern side of the Himalaya. GPS results were compared with GRACE observations. Principal component analysis was conducted to decompose the time series into three-dimensional principal components (PCs) and spatial eigenvectors. The top three high-order PCs were calculated to correct common mode errors. Both GPS and GRACE observations showed significant seasonal variations. The observed seasonal GPS vertical variations are in good agreement with those from the GRACE-derived results, particularly for changes in surface pressure, non-tidal oceanic mass loading, and hydrologic loading. The GPS-observed rates of vertical deformation obtained for the region suggest both tectonic impact and mass decrease. The rates of vertical crustal deformation were estimated by removing the GRACE-derived hydrological vertical rates from the GPS measurements. Most of the sites located in the southern part of the Main Himalayan Thrust subsided, whereas the northern part mostly showed an uplift. These results may contribute to the understanding of secular vertical crustal deformation in Nepal.     

联结翼飞机主要布局参数对全机升阻特性影响研究

联结翼飞机具有重量轻、刚度大、诱导阻力低等优势。采用涡格法,研究联结翼主要布局参数(前翼后掠角、前后翼展向连接点位置、前后翼垂直方向高度差)的变化对升力系数、阻力系数和最大升阻比的影响。所得计算结果对联结翼飞机气动布局参数的确定具有参考价值。     

Optimal guidance of extended trajectory shaping

To control missile＇s miss distance as well as terminal impact angle, by involving the timeto-go-nth power in the cost function, an extended optimal guidance law against a constant maneuvering target or a stationary target is proposed using the linear quadratic optimal control theory.An extended trajectory shaping guidance（ETSG） law is then proposed under the assumption that the missile-target relative velocity is constant and the line of sight angle is small. For a lag-free ETSG system, closed-form solutions for the missile＇s acceleration command are derived by the method of Schwartz inequality and linear simulations are performed to verify the closed-form results. Normalized adjoint systems for miss distance and terminal impact angle error are presented independently for stationary targets and constant maneuvering targets, respectively. Detailed discussions about the terminal misses and impact angle errors induced by terminal impact angle constraint, initial heading error, seeker zero position errors and target maneuvering, are performed.     

叶片型面测量的数据分析及误差评定方法

通过对三坐标测量机测量精铸叶片的种类、原理和方法进行分析,重点探讨了三坐标测量机测量扭曲叶片产生误差的原因及误差修正方法,并应用实例进行了较为详尽的论述和验证,给出了扭曲叶片检测误差修正的实现算法和评价方法。     

发射惯性坐标系下误差角与数学平台失准角的推导与仿真

基于状态空间法的捷联惯性/天文组合导航系统(SINS/CNS)需要数学平台失准角作为观测值参与滤波估计,工程实际只能得到SINS、CNS二者的姿态误差角.以弹道导弹为背景,在发射惯性坐标系下分别推导了四元数和欧拉角形式的姿态误差角与数学平台失准角之间的相互转换矩阵.建立了弹道导弹SINS/CNS数学模型,并采用EKF和UKF算法验证了该转换矩阵.仿真结果表明误差转换矩阵的正确性.     

基于NURBS方法的机翼气动外形优化

飞行器气动外形优化就是将设计对象的空气动力学性能分析与最优化方法相结合,通过不断改变设计对象的外形,使其气动性能在满足一定约束条件下达到最优.气动外形优化是一个涉及几何参数化、动网格、流场计算和寻优算法的综合应用平台.随着计算流体力学(CFD)的发展以及高性能计算机的使用,气动外形优化在现代飞行器设计中的作用愈加重要....     

基于解析法的用户差分距离误差解算方法(英文)

为了进一步增强星基导航系统的完好性性能,提出了一种基于解析法的用户差分距离误差计算方法。文中首先介绍了卫星时钟和星历改正数的计算方法,认为计算用户差分距离误差的关键是查找卫星服务区域内的最差用户位置。通过变换卫星时钟和星历误差协方差矩阵,将查找最差用户位置变换成一个解析几何问题,通过数学推导得出最差用户位置的解析式,进而求解用户差分距离误差。通过计算机仿真对比了解析法和遍历法之间的性能差异,结果表明:解析法的正确性由遍历法得到了验证,解析法可以减少90%的运行时间并且具有更低的计算复杂度,便于工程实现。     

轴向拉伸试验机同轴度检测技术研究

针对轴向拉伸试验机几何同轴度与受力同轴度检测的适用范围不明确,受力同轴度的检测、计算与评判方法不统一等问题,本文基于同轴度定义与检测原理提出了解决这些问题的一些方法和建议。     

基于相关误差的变步长LMS算法

以自适应对象建模为应用背景,对不同的变步长LMS算法进行对比研究,提出了一种基于相关误差的变步长LMS算法,仿真结果表明,该算法较现有算法具有较快的收敛速度和较高的收敛精度.