过载约束下的大机动目标协同拦截

研究了非线性拦截几何下具有过载约束的多枚弱机动能力的导弹拦截强机动能力的目标的协同拦截问题。首先，在建立导弹的可达域、导弹的可行域以及目标的逃逸域这3个概念的基础上提出了非线性拦截几何下的基于逃逸域覆盖的协同拦截策略，并提出了基于标准弹道的设计方法。然后，给出了协同拦截制导律的形式，研究了导弹的末制导初始阵位、制导律参数以及导弹对目标机动的覆盖区域这三者间的关系，并设计了数值求解算法来实现对多弹的覆盖区域的分配、协同制导律的设计以及多弹初始拦截阵位的配置。最后，对理论结果进行仿真。结果显示，多枚机动性较小的导弹，通过初始拦截阵位的合理配置和协同拦截制导律的合理设计，可以实现对机动性能较强的目标的协同拦截。     

Multiple-constraint cooperative guidance based on two-stage sequential convex programming

An improved approach is presented in this paper to implement highly constrained cooperative guidance to attack a stationary target. The problem with time-varying Proportional Navigation (PN) gain is first formulated as a nonlinear optimal control problem, which is difficult to solve due to the existence of nonlinear kinematics and nonconvex constraints. After convexification treatments and discretization, the solution to the original problem can be approximately obtained by solving a sequence of Second-Order Cone Programming (SOCP) problems, which can be readily solved by state-of-the-art Interior-Point Methods (IPMs). To mitigate the sensibility of the algorithm on the user-provided initial profile, a Two-Stage Sequential Convex Programming (TSSCP) method is presented in detail. Furthermore, numerical simulations under different mission scenarios are conducted to show the superiority of the proposed method in solving the cooperative guidance problem. The research indicated that the TSSCP method is more tractable and reliable than the traditional methods and has great potential for real-time processing and on-board implementation.     

联结翼飞机主要布局参数对全机升阻特性影响研究

联结翼飞机具有重量轻、刚度大、诱导阻力低等优势。采用涡格法,研究联结翼主要布局参数(前翼后掠角、前后翼展向连接点位置、前后翼垂直方向高度差)的变化对升力系数、阻力系数和最大升阻比的影响。所得计算结果对联结翼飞机气动布局参数的确定具有参考价值。     

基于NURBS方法的机翼气动外形优化

飞行器气动外形优化就是将设计对象的空气动力学性能分析与最优化方法相结合,通过不断改变设计对象的外形,使其气动性能在满足一定约束条件下达到最优.气动外形优化是一个涉及几何参数化、动网格、流场计算和寻优算法的综合应用平台.随着计算流体力学(CFD)的发展以及高性能计算机的使用,气动外形优化在现代飞行器设计中的作用愈加重要....     

轴向拉伸试验机同轴度检测技术研究

针对轴向拉伸试验机几何同轴度与受力同轴度检测的适用范围不明确,受力同轴度的检测、计算与评判方法不统一等问题,本文基于同轴度定义与检测原理提出了解决这些问题的一些方法和建议。     

多约束多星快响巡察任务规划方法

多星快响巡察任务是指多个目标卫星出现不明状况,巡察服务平台在短时间内进行轨道转移,携带多个子航天器对目标进行飞越巡察。对于该问题的任务规划,首先基于共面机动给出了平台调相策略并建立了满足光照和机动能力等约束的巡察窗口筛选计算模型;其次提出了一种贪婪搜索和多轮规划的方法,用于确定任务分配方案和巡察次序;最后在高精度轨道模型下验证了方法的有效性并将该方法与混合编码遗传算法进行了对比。在算例中,该方法的优化效果稍优于混合编码遗传算法,而且求解效率是后者的约227倍,表明贪婪搜索和多轮规划方法更适用该问题的高效求解。     

双臂协调机械手动力学建模的新方法

由于某种既定任务而产生的约束关系的存在,使得双臂协调机械手的动力学特性表现出高度的非线性和耦合性。因此,利用传统的拉格朗日方程建立其动力学模型显得困难重重。针对平面双臂协调搬运机械手的动力学建模问题,基于传统的拉格朗日方程给出并证明了平面多杆机械手动力学方程的一般表达式。然后利用上述表达式,并基于分析力学界著名的Udwadia-Kalaba方程的建模思想,获得双臂协调机械手在预定轨迹下各杆所需附加力矩的解析表达式及系统的动力学方程,克服了传统拉格朗日方程需借助拉格朗日乘子获得动力学方程的缺点。双臂协调机械手的关节角变化规律和被搬运物体轨迹的数值仿真结果证明所建立的动力学方程符合实际情况。      

A Weighted Inner Product Estimator in the Geometric Algebra of Euclidean 3-Space for Source Localization Using an EM Vector-sensor

In this paper, the source localization by utilizing the measurements of a single electromagnetic (EM) vector-sensor is investigated in the framework of the geometric algebra of Euclidean 3-space. In order to describe the orthogonality among the electric and magnetic measurements, two multivectors of the geometric algebra of Euclidean 3-space (G3) are used to model the outputs of a spatially collocated EM vector-sensor. Two estimators for the wave propagation vector estimation are then formulated by the inner product between a vector and a bivector in the G3. Since the information used by the two estimators is different, a weighted inner product estimator is then proposed to fuse the two estimators together in the sense of the minimum mean square error (MMSE). Analytical results show that the statistical performances of the weighted inner product estimator are always better than its traditional cross product counterpart. The efficacy of the weighted inner product estimator and the correctness of the analytical predictions are demonstrated by simulation results.     

Coordinated Multiple Spacecraft Attitude Control with Communication Time Delays and Uncertainties

In this paper, we consider the coordinated attitude control problem of spacecraft formation with communication delays, model and disturbance uncertainties, and propose novel synchronized control schemes. Since the attitude motion is essential in non-Euclidean space, thus, unlike the existing designs which describe the delayed relative attitude via linear algorithm, we treat the attitude error and the local relative attitude on the nonlinear manifold-Lie group, and attempt to obtain coupling attitude information by the natural quaternion multiplication. Our main focus is to address two problems:1) Propose a coordinated attitude controller to achieve the synchronized attitude maneuver, i.e., synchronize multiple spacecraft attitudes and track a time-varying desired attitude; 2) With known model information, we achieve the synchronized attitude maneuver with disturbances under angular velocity constraints. Especially, if the formation does not have any uncertainties, the designer can simply set the controller via an appropriate choice of control gains to avoid system actuator saturation. Our controllers are proposed based on the Lyapunov-Krasovskii method and simulation of a spacecraft formation is conducted to demonstrate the effectiveness of theoretical results.     

CATIA草图辅助线及关系曲线在四杆机构设计中的应用

在用草图工具进行四杆机构设计的过程中,为了解决代数等值参数不可调的问题,采用几何相等辅助线的方法,使所有参数在限制范围内均可调。同时为了更直观地展示四杆机构各几何、运动参数之间的函数关系及变化趋势,运用VB工具进行了在草图中展示关系曲线的二次开发。经过实践证明,以上创新方法的应用能够显著提高概念论证和方案选择阶段机构设计的效率和质量。