二元保形非对称膨胀喷管流场特性研究

利用数值模拟方法对一种与无人飞行器后体一体化设计的二元保形大宽高比非对称膨胀喷管在地面状态的流场特性进行了研究,获得了尾喷管推力性能和三维流动特征随落压比的变化趋势。结果表明：虽然二元保形非对称膨胀喷管沿横向存在非等强度膨胀,但在研究范围内最佳落压比仍主要取决于上方短膨胀面结束位置面积与喉道面积之比;沿横向不等强度膨胀诱发的二次流及旋涡流动能够增强环境冷流与喷流之间的掺混;在研究的落压比范围内,随着落压比的增加喷管的推力性能变化很缓慢。     

俄交变中磁标准装置研究

介绍了从俄罗斯引进的用于交变磁场的国防标准——交变中磁标准装置的基本工作原理,以及对其设计方案的剖析。该标准装置工作频率（20～1 000）Hz,复现交变磁场强度（0.1～1 000）mT,在这一领域内代表国际最高水平。通过对其信号获取、磁场感应信号的放大处理、大电流的产生办法、安全互锁设计,以及整体系统理论计算的分析,为该领域内标准装置的国产化提供理论基础,具有较好的实用价值。     

基于线性模型的风电场发电量计算与分析

针对相对平坦地形,采用线性化流体方程描述流场,并根据大气边界层特性进一步简化计算方法,即利用所谓地形影响系数快速求解感兴趣点(一般为风机位置)的流动速度;针对尾流影响,采用工程上广泛使用的修正Park模型来求解,尾流线性叠加并忽略较弱的尾流影响。文中介绍了一个已建典型海滨风电场的装机规模、地表粗糙度以及测风情况,并以此风电场为算例采用不同测风数据进行发电量计算,预测结果与实际发电量较好地吻合。最后探索了算例风电场各风机发电量不均衡原因,提出地形图大小对风场模拟准确性的影响,并从工程设计角度提出具体意见。     

Three-dimensional path planning for unmanned aerial vehicle based on interfered fluid dynamical system

This paper proposes a method for planning the three-dimensional path for low-flying unmanned aerial vehicle(UAV) in complex terrain based on interfered fluid dynamical system(IFDS) and the theory of obstacle avoidance by the flowing stream. With no requirement of solutions to fluid equations under complex boundary conditions, the proposed method is suitable for situations with complex terrain and different shapes of obstacles. Firstly, by transforming the mountains, radar and anti-aircraft fire in complex terrain into cylindrical, conical, spherical, parallelepiped obstacles and their combinations, the 3D low-flying path planning problem is turned into solving streamlines for obstacle avoidance by fluid flow. Secondly, on the basis of a unified mathematical expression of typical obstacle shapes including sphere, cylinder, cone and parallelepiped, the modulation matrix for interfered fluid dynamical system is constructed and 3D streamlines around a single obstacle are obtained. Solutions to streamlines with multiple obstacles are then derived using weighted average of the velocity field. Thirdly, extra control force method and virtual obstacle method are proposed to deal with the stagnation point and the case of obstacles’ overlapping respectively. Finally, taking path length and flight height as sub-goals, genetic algorithm(GA) is used to obtain optimal 3D path under the maneuverability constraints of the UAV. Simulation results show that the environmental modeling is simple and the path is smooth and suitable for UAV. Theoretical proof is also presented to show that the proposed method has no effect on the characteristics of fluid avoiding obstacles.     

Semi-analytic Solution of Steady Temperature Fields During Thin Plate Welding

Usually, it is very difficult to find out an analytical solution to thermal conduction problems during high temperature welding. Therefore, as an important numerical approach, the method of lines (MOLs) is introduced to solve the temperature field characterized by high gradients. The basic idea of the method is to semi-discretize the governing equation of the problem into a system of ordinary dif-ferential equations (ODEs) defined on discrete lines by means of the finite difference method, by which the thermal boundary condition with high gradients are directly embodied in formulation. Thus the temperature field can be obtained by solving the ODEs. As a numeri-cal example, the variation of an axisymmetrical temperature field along the plate thickness can be obtained.     

Hall MHD reconnection with an initial guide field By0

An uniform out-of-plane magnetic field component B_y0 is added to the equilibrium Harris sheet with plasma β = 0.5 and L_c = 0.5d_i (where L_c is the half-width of the equilibrium current layer and d_i is the ion inertial length). Driven by the continuous boundary inflows, the magnetic reconnections with the guide field B_y0/B₀ ranging from 0 to 4.0 are investigated using a 2.5D Hall magnetohydro-dynamic (MHD) code developed from a multi-step implicit scheme. The features of the reconnection field are substantially altered in the presence of the guide field. The openness of the magnetic separatrix angle is slightly reduced and the anti-symmetric quadrupolar structure of B_y field and the symmetric distribution of plasma pressure P are replaced by an asymmetric B_y four-wing structure and an asymmetric P plot as a non-zero B_y0 is added. The decoupling of electrons and ions also occurs near the X line in the case with a finite B_y0, but the effect of initial B_y0 on the electron flow is greater than that on the ion flow. The reconnection rates at the X-line drops from 0.151 to 0.06, namely, ∂A/∂t is reduced by a factor of 2.5 as B_y0/B₀ increases from 0 to 4.0. The reduction of reconnection rate might be related to the reducing openness of reconnection layer with the increasing B_y0.     

浅论红色文化产品的创新设计与价值实现——以河北省为例

本文通过对红色文化领域物质与精神两方面产品的研发现状与经验的分析,结合未来设计领域的发展趋势,提出开发体验性和个性化的红色文化产品。以河北省为例,探讨如何在实现红色文化产品的价值同时,更好的使红色文化为当代精神文明建设服务。     

Planetary Magnetic Dynamo Effect on Atmospheric Protection of Early Earth and Mars

In light of assessing the habitability of Mars, we examine the impact of the magnetic field on the atmosphere. When there is a magnetic field, the atmosphere is protected from erosion by solar wind. The magnetic field ensures the maintenance of a dense atmosphere, necessary for liquid water to exist on the surface of Mars. We also examine the impact of the rotation of Mars on the magnetic field. When the magnetic field of Mars ceased to exist (about 4 Gyr ago), atmospheric escape induced by solar wind began. We consider scenarios which could ultimately lead to a decrease of atmospheric pressure to the presently observed value of 7 mbar: a much weaker early martian magnetic field, a late onset of the dynamo, and high erosion rates of a denser early atmosphere.     

某型飞机导航误差对CCD稳瞄系统目标搜索域的影响

分析了DG-1型多普勒／GPS组合导航系统，在不同工作方式下导航误差所引起的搜索方位角的误差；讨论了由于搜索方位角的变化引起的搜索域的变化。通过对机理的研究提出了解决办法。     

双翼金属圆柱体散射场的整体计算

本文利用keller的几何绕射理论（GTD）推求出双翼金属圆柱体散射场高频快收敛整体解，弥补了传统分离解（把系统分解为一个金属圆柱和两个金属半平面，分别求解再简单迭加）的不足之处，最后，给出了整体解和分离解的散射电场的模值数值计算结果。