FPGA设计中的亚稳态问题及其预防方法研究

由于在复杂FPGA（Field Programmable Gate Array,现场可编程门阵列）设计中存在跨时钟域,通常会产生亚稳态现象.为有效地预防和解决该问题,分析FPGA设计中亚稳态的产生机理及其对数字信号处理系统的影响.根据不同的信号同步类型,针对单比特电平信号、脉冲信号和边沿信号,分别给出基于触发器级联的跨时钟域信号同步方法;针对并行信号,提出基于异步FIFO （First In First Out,先进先出队列）和握手协议的跨时钟域同步方法;并通过仿真手段分析信号同步方法的有效性及其适用范围.结果表明：这些方法能够正确有效地完成跨时钟域信号同步,预防可能出现的亚稳态问题,从而提高复杂FPGA设计的可靠性和稳定性.     

Plastic wrinkling prediction in thin-walled part forming process:A review

The precision forming of thin-walled components has been urgently needed in aviation and aerospace field. However, the wrinkling induced by the compressive instability is one of the major defects in thin-walled part forming. The initiation and growth of the wrinkles are interac-tively affected by many factors such as stress states, mechanical properties of the material, geometry of the workpiece and boundary conditions. Especially when the forming process involves compli-cated boundary conditions such as multi-dies constrains, the perturbation of clearances between workpiece and dies and the contact conditions changing in time and space, etc., the predication of the wrinkling is further complicated. In this paper, the current prediction methods were summa-rized including the static equilibrium method, the energy method, the initial imperfection method, the eigenvalue buckling analysis method, the static-implicit finite element method and the dynamic-explicit finite element method. Then, a systematical comparison and summary of these methods in terms of their advantages and limitations are presented. By using a combination of explicit FE method, initial imperfection and energy conservation, a hybrid method is recommended to predict plastic wrinkling in thin-walled part forming. Finally, considering the urgent requirements of com-plex thin-walled structures’ part in aviation and aerospace field, the trends and challenges in wrin-kling prediction under complicated boundary conditions are presented.     

DME Interference mitigation for L-DACS1 based on system identification and sparse representation

L-band digital aeronautical communication system 1 (L-DACS1) is a promising candi-date data-link for future air-ground communication, but it is severely interfered by the pulse pairs (PPs) generated by distance measure equipment. A novel PP mitigation approach is proposed in this paper. Firstly, a deformed PP detection (DPPD) method that combines a filter bank, correlation detection, and rescanning is proposed to detect the deformed PPs (DPPs) which are caused by mul-tiple filters in the receiver. Secondly, a finite impulse response (FIR) model is used to approximate the overall characteristic of filters, and then the waveform of DPP can be acquired by the original waveform of PP and the FIR model. Finally, sparse representation is used to estimate the position and amplitude of each DPP, and then reconstruct each DPP. The reconstructed DPPs will be sub-tracted from the contaminated signal to mitigate interference. Numerical experiments show that the bit error rate performance of our approach is about 5 dB better than that of recent works and is closer to interference-free environment.     

航天器安全防护保障探讨

把对航天器安全的威胁分为硬和软两大类，分析了对航天器产生威胁的类别，以及为保证航天器安全而需要采取的措施。介绍了研究的内容，需要建设的空间信息对抗系统和空间信息探测网。     

基于离散粒子群算法的航空发动机总装工艺优化方法

为了提高航空发动机总装工作的效率与质量,加强对总装工序和总装机件的管控,量化不同总装人员工作任务量,提高发动机总装的一致性和可追溯性,提出了1种发动机总装分区优化方法。以改进的2进制粒子群算法为基础,平衡了发动机总装各区域的工作内容,最小化各总装区域的工作差异,增强了每个区域装配机件的关联度,提高了总装工作的并行度,从而提高了装配质量。以某型发动机总装区域划分工作为实例,通过上述算法进行了总装区域划分,量化了所有装配区域每一工序的具体装配内容,减小了不同装配区域间的机件差异,杜绝了缺件、剩件等装配问题。     

面向一体化计算的整体式液体冲压发动机建模及性能评估

为发展冲压发动机性能工程预估方法,建立了面向一体化计算的整体式液体冲压发动机性能计算模型,并使其兼容基团贡献算法,提高了拓展性。利用模型分析了冲压发动机在攻角0°～6°、高度0～18km、马赫数2.0～3.5、余气系数1.0～2.9范围工况多维度连续变化下,比冲、推力系数和燃油质量流量的速度-高度特性、高度-节流特性、节流-速度特性以及攻角特性。研究结果表明:性能计算模型可在一体化计算条件下、基团贡献算法允许范围内,不依赖试验数据对冲压发动机性能预估,计算结果与技术参考值相比相对误差均小于14%。推力系数和比冲具有基本一致的速度-高度特性和相似的高度-节流特性,受燃气组分影响,推力系数和比冲的节流-速度特性差异明显。燃油质量流量的变化规律不同于比冲和推力系数,在进入平流层后呈现折缓趋势,而呈现连续性,速度越大、高度越低、余气系数越小,燃油质量流量越高,反之则越小。引入攻角以后,攻角越大,比冲和推力系数越低,进气道起动马赫数越高;攻角-起动马赫数曲线小范围内近似线性,攻角超过5.6°非线性加剧。     

风扇/压气机周向模态识别中传感器角度偏差的影响

基于任意角度压缩感知(CS)方法分析了传感器安装角度偏差对风扇/压气机周向模态识别重构的影响,设计了一套自适应角度优化程序修正重构误差。利用数值试验探究了传感器角度偏差和数量对周向模态重构结果的影响,研究表明:当角度偏差等级为2.5%时,平均重构误差达到10%以上,若保证重构误差基本不变,将传感器数量从7个增加至25个,仅可以将角度偏差等级放宽至4%。而采用小生境微种群遗传算法进行自适应角度优化,在20 dB信噪比下,通过自适应角度优化可将角度偏差等级从2.5%放宽至10%,降低了传感器安装的精度要求。成功优化了一款冷却风扇在前三阶叶片通过频率下的主要周向声模态重构幅值。自适应角度优化算法有效提升了基于压缩感知的风扇/压气机周向模态重构可靠性。     

W波段UAV MISAR实时成像运动补偿方法

建立了实时成像正侧视合成孔径雷达(SAR)运动误差模型,采用了一种基于惯导和相位梯度自聚焦(PGA)运动误差估计的中心波束平面运动补偿算法。该算法对回波包络和相位进行分开补偿,利用惯导数据把带有运动误差的回波包络拉直,再利用相位梯度自聚焦算法对回波进行相位误差估计并补偿。针对实时成像的时间少、运算量大、运算资源受限等特点,该算法取消了距离徙动校正的步骤,将运动误差矢量在斜距平面投影并完成包络校正和相位误差估计。该方法运算量小,同时能满足分辨率要求。仿真结果表明:该方法能够得到质量较高的SAR图像。     

一种中心型间断有限元MMALE方法

针对多介质可压缩流体动力学问题,提出了一种单元中心型二维MMALE(Multi-Material Arbitrary Lagrangian-Eulerian)方法.在拉氏步,流体力学方程组采用中心型间断有限元方法求解.对于混合网格,采用Tipton压力松弛模型更新物理量,用等参坐标法更新物质中心点坐标.界面重构采用一种...     

Hypersonic reentry trajectory planning by using hybrid fractional-order particle swarm optimization and gravitational search algorithm

This paper proposes a novel hybrid algorithm called Fractional-order Particle Swarm optimization Gravitational Search Algorithm (FPSOGSA) and applies it to the trajectory planning of the hypersonic lifting reentry flight vehicles. The proposed method is used to calculate the control profiles to achieve the two objectives, namely a smoother trajectory and enforcement of the path constraints with terminal accuracy. The smoothness of the trajectory is achieved by scheduling the bank angle with the aid of a modified scheme known as a Quasi-Equilibrium Glide (QEG) scheme. The aerodynamic load factor and the dynamic pressure path constraints are enforced by further planning of the bank angle with the help of a constraint enforcement scheme. The maximum heating rate path constraint is enforced through the angle of attack parameterization. The Common Aero Vehicle (CAV) flight vehicle is used for the simulation purpose to test and compare the proposed method with that of the standard Particle Swarm Optimization (PSO) method and the standard Gravitational Search Algorithm (GSA). The simulation results confirm the efficiency of the proposed FPSOGSA method over the standard PSO and the GSA methods by showing its better convergence and computation efficiency.