Eliminating negative VTEC in global ionosphere maps using inequality-constrained least squares

Currently, ground-based Global Navigation Satellite System (GNSS) stations of the International GNSS Service (IGS) are distributed unevenly around the world. Most of them are located on the mainland, while only a small part of them are scattered on some islands in the oceans. As a consequence, many unreasonable zero values (in fact negative values) appear in Vertical Total Electron Content (VTEC) of European Space Agency (ESA) and Center for Orbit Determination in Europe (CODE) IONEX products, especially in 2008 and 2009 when the solar activities were rather quiet. To improve this situation, we directly implement non-negative physical constraints of ionosphere for global ionosphere maps (GIM) with spherical harmonic functions. Mathematically, we propose an inequality-constrained least squares method by imposing non-negative inequality constraints in the areas where negative VTEC values may occur to reconstruct GIM models. We then apply the new method to process the IGS data in 2008. The results have shown that the new algorithm efficiently eliminates the unwanted behavior of negative VTEC values, which could otherwise often be seen in the current CODE and ESA GIM products in both middle and high latitude areas of the Southern Hemisphere (45°S∼90°S) and the Northern Hemisphere (50°N∼90°N). About 64% of GPS receivers’ DCBs have been significantly improved. Finally, we compare the GIM results between with and without the inequality constraints, which has clearly shown that the GIM result with inequality constraints is significantly better than that without the inequality constraints. The inequality-constrained GIM result is also highly consistent with the final IGS products in terms of root mean squared (RMS) and mean VTEC.     

矩阵方程A×B=C的中心对称解

文章研究了矩阵方程的中心对称解.利用矩阵对的广义奇异值分解给出了该方程有中心对称解的充分必要条件,以及解的通式,证明了最佳逼近问题存在唯一解,并给出了求最佳逼近解的算法和数值箅例.     

一种新的极点配置广义预测控制方法

 提出一种新的极点配置广义预测控制方法,该方法在性能指标函数中引入控制增量的当前及过去值项来进行闭环系统极点配置,同时通过调节控制器中的设计参数可改进闭环系统动态性能,且能保证闭环系统无稳态输出误差。     

ARMAX模型参数估计的新两步法

 本文提出了一种ARMAX模型参数估计的新两步法。这种方法与其它递推估计方法（如增广矩阵法,极大似然法,Durbin两步法、三步法等）比较,具有较好的收敛特性,对参数的估计,特别是对C参数的估计比较精确,这是利用其它方法,一直未能很好解决的一个难题。     

基于最小二乘支持向量机的普通高校招生人数预测研究

近年来普通高校的发展速度与规模,使社会大众兴起了对教育质量与总量的关注。普通高校招生数预测是制定教育政策的重要依据。针对中国文化教育的特征,在统计学习理论和结构风险最小化原理的基础上,建立了基于最小二乘支持向量机的时间序列预测模型。预测结果表明该模型具有较高的预测精度,为普通高校招生数预测提供了一条新的途径。     

基于最小二乘法的磁力计误差补偿与校准

磁力计在行人自主导航系统中用于提供绝对航行信息,而航向的精度直接决定着系统定位的精度。针对目前磁力计标定方法中存在磁干扰等问题,提出了一种基于最小二乘法和"8"字校准法对磁力计零偏进行实时校准的方法。该方法先利用最小二乘法修正磁力计零偏,再根据磁力计的模值大小及方差作为磁干扰的判断条件,用"8"字旋转方式进行实时校准。通过仿真和实验验证,新的方法有效地解决了磁力计误差补偿问题,证明了改进误差补偿算法的可行性和有效性。     

基于粒子群算法-最小二乘支持向量机算法的磁化曲线拟合

磁化曲线是强非线性函数,提高磁化曲线的拟合精度对含有铁磁材料的电气设备建模准确性至关重要。提出了一种基于粒子群算法-最小二乘支持向量机(PSOLSSVM)算法的磁化曲线拟合方法。该方法用粒子群优化算法解决了最小二乘支持向量机(LSSVM)参数的选择问题。仿真结果显示PSOLSSVM算法能获得最优的LSSVM参数,且采用PSOLSSVM算法拟合的磁化曲线与实际测量的磁化曲线基本无偏差,拟合精度较高。     

低速单级轴流压气机自引气扩稳实验

在一台低速单级轴流压气机上采用自引气-喷气方式进行了实验研究,实验中分析比较了不同的引气方式对压气机失速裕度改善(SMI)以及对压气机效率的影响,同时对不同自引气方式的扩稳机理进行了探讨.实验结果表明:自引气方式能够有效的改善压气机失速裕度,并且能够略微提高压气机效率.与传统的外部引气相比,节省了外部引气所需要的外部空气压缩系统;为自引气在实际压气机稳定性控制中的应用提供参考.      

基于神经网络与果蝇优化算法的涡轮叶片低循环疲劳寿命健壮性设计

在对涡轮叶片低循环疲劳寿命概率分析的基础上,将广义回归型神经网络(generalized regression neural network,GRNN)与果蝇优化算法(fruit fly optimization algorithm,FFOA)结合,利用果蝇优化算法的多点全局的快速搜索能力来优化影响疲劳寿命的随机变量,进行涡轮叶片低循环疲劳寿命健壮性优化设计.优化结果表明:疲劳寿命的概率区间减小17.9%,对随机变量的敏感度降低,从而可以更精确地对疲劳寿命进行估计.计算结果验证了该方法在工程应用中的可行性.      

An adaptive turbo-shaft engine modeling method based on PS and MRR-LSSVR algorithms

In order to establish an adaptive turbo-shaft engine model with high accuracy, a new modeling method based on parameter selection (PS) algorithm and multi-input multi-output recursive reduced least square support vector regression (MRR-LSSVR) machine is proposed. Firstly, the PS algorithm is designed to choose the most reasonable inputs of the adaptive module. During this process, a wrapper criterion based on least square support vector regression (LSSVR) machine is adopted, which can not only reduce computational complexity but also enhance generalization performance. Secondly, with the input variables determined by the PS algorithm, a mapping model of engine parameter estimation is trained off-line using MRR-LSSVR, which has a satisfying accuracy within 5&. Finally, based on a numerical simulation platform of an integrated helicopter/ turbo-shaft engine system, an adaptive turbo-shaft engine model is developed and tested in a certain flight envelope. Under the condition of single or multiple engine components being degraded, many simulation experiments are carried out, and the simulation results show the effectiveness and validity of the proposed adaptive modeling method.