WSO-UV project

During last three decades, astronomers have enjoyed continuous access to the 100–300 nm ultraviolet (UV) spectral range where the resonance transitions of the most abundant atoms and ions (at temperatures between 3000 and 300 000 K) reside. This UV range is not accessible from ground-based facilities. The successful International Ultraviolet Explorer (IUE) observatory, the Russian ASTRON mission and successor instruments such as the Galaxy Evolution Explorer (GALEX) mission or the COS and STIS spectrographs on-board the Hubble Space Telescope (HST) prove the major impact of observations in the UV wavelength range in modern astronomy. Future access to space-based observatories is expected to be very limited. For the next decade, the post-HST era, the World Space Observatory – Ultraviolet (WSO–UV) will be the only 2-m class UV telescope with capabilities similar to the HST. WSO–UV will be equipped with instruments for imaging and spectroscopy and it will be a facility dedicated, full-time, to UV astronomy. In this article, we briefly outline the current status of the WSO–UV mission and the science management plan.     

不同迎角下脊形前体绕流数值模拟研究

脊形前体有较强的背风涡流场,不同的前体形状对前体涡流场和气动力有很大的影响。本文针对脊形前体飞行器大迎角湍流大分离流动计算的困难,采用IDDES混合湍流模型,以及与之匹配的非定常算法,研究了不同来流迎角下脊形前体的气动特性,以及背风涡非定常演化、破裂的细致流动结构。选取了不同脊形角,以及不同上、下高宽比的脊形前体进行计算。计算结果表明,在迎角较小时,随着迎角的增大,前体主涡会逐渐增强,在迎角较大时,前体主涡破裂;在相同迎角下,脊形角较小时,前体涡较强,涡升力也更大;对于相同脊形角的前体,当上半截面高宽比较小时,前体主涡强度较大,前体涡破裂临界迎角较小,即会提前破裂。     

Effect of curing condition on bonding quality of scarf-repaired composite laminates

Both single-face vacuum bag curing (SVC) and double-face vacuum bag curing (DVC) can be used in scarf repair of composite structures. But different curing conditions caused by the sealing state may affect the bonding quality of scarf-repaired structures. In this paper, the effect of curing condition on bonding quality of scarf-repaired laminates was experimentally investigated in terms of surface profiles, moisture absorption curves and section profiles. In order to further explore the moisture absorption mechanism, finite element model of the repaired laminates using DVC was established with moisture diffusion of both the adhesive and composite laminates considered. This model was verified by experimental results. Based on the model of DVC case, the model of SVC case was built by changing moisture absorption parameters of the adhesive. Results show that SVC reduces the bonding quality, mainly reflecting in more adhesive inner voids and patch-to-parent dislocation. And SVC increases moisture absorption rate and moisture equilibrium content of the adhesive, and its effect on the former is far greater than that on the latter.     

A constitutive model coupling damage and material anisotropy for wide stress triaxiality

A constitutive model that can describe the damage evolution of anisotropic metal sheets during the complex forming processes which experience wide stress triaxiality history is essential to accurately predict the deformation and rupture behaviors of the processes. In this study, a modified Lemaitre damage criterion which couples with the anisotropic Barlat 89 yield function is established. The effects of stress triaxiality, Lode parameter and shear stress on damage accumulation are considered in the constitutive model. The model is numerically implemented and applied to fracture prediction in tensile tests with different stress triaxialities and a complex deformation process with wide stress triaxiality history. The good consistency of predictions and experiments indicates that the modified Lemaitre damage model has excellent fracture prediction ability. Finally, the accuracy of the model is analyzed and discussed.     

Geometric error analysis of an over-constrained parallel tracking mechanism using the screw theory

This paper deals with geometric error modeling and sensitivity analysis of an overconstrained parallel tracking mechanism. The main contribution is the consideration of overconstrained features that are usually ignored in previous research. The reciprocal property between a motion and a force is applied to tackle this problem in the framework of the screw theory. First of all, a nominal kinematic model of the parallel tracking mechanism is formulated. On this basis, the actual twist of the moving platform is computed through the superposition of the joint twist and geometric errors. The actuation and constrained wrenches of each limb are applied to exclude the joint displacement. After eliminating repeated errors brought by the multiplication of wrenches, a geometric error model of the parallel tracking mechanism is built. Furthermore,two sensitivity indices are defined to select essential geometric errors for future kinematic calibration. Finally, the geometric error model with minimum geometric errors is verified by simulation with SolidWorks software. Two typical poses of the parallel tracking mechanism are selected, and the differences between simulation and calculation results are very small. The results confirm the correctness and accuracy of the geometric error modeling method for over-constrained parallel mechanisms.     

A regional tropospheric model for airborne GPS applications

A regional tropospheric model can be constructed using surveys from GPS ground networks. Using this model the tropospheric delays of a kinematic station within the region can be interpolated. However, such a model is generally not suitable for an airborne platform high above the ground networks. In this paper, a method of constructing a regional tropospheric model for airborne GPS applications is described. First, the kinematic station in the air is projected onto the ground. Then the tropospheric delays at projected point are interpolated from those of the ground networks. Finally, the tropospheric delays at projected point are extended upward to the airborne platform using pressure and temperature gradients and humidity exponential function. For validation of this method, the data of airborne campaign carried out by BKG in cooperation with GFZ and BGR 2008 in the northern Alps are used. The results show that GPS kinematic positioning precision in height component can be improved using this method.     

几种生长模型参数的最小二乘估计方法及应用

提出一种Logistic模型、Gompertz模型、Mitscherlich模型和Bertallanffy模型的分布参数估计方法，这种方法以加权最小二乘法为基础，推导求解分布参数的方程组。利用这类曲线模型中参数形式的特点，使同时求解三个参数的问题简化为同时求解两个参数的问题，并给出求解参数耦合方程组的二重二分迭代法。预测地基沉降的计算实例表明，这种方法对于迭代初值的选取要求较低、求解速度快、精度高，而且通过选取权因子可以对已有数据实现“重近轻远”的处理。     

消费者创新性对手机银行使用意愿的影响研究

探索消费者创新性对手机银行使用意愿的影响,基于技术接受模型,构建了消费者创新性影响手机银行使用意愿的假设模型,依据假设模型开展了问卷调查。通过AMOS17.0软件对调查数据和假设模型进行了结构方程模型检验。研究结果表明,消费者创新性对手机银行使用意向具有显著影响,其影响机制是通过消费者对手机银行易用性和有用性的感知影响消费者对手机银行的使用态度,进而影响手机银行使用意向。在此基础上对商业银行发展手机银行提出了实践建议。     

军用飞机型号研制试飞费用估算研究

在借鉴国外经验的基础上,对国内军用飞机型号研制试飞费用的构成进行了研究,提出基于兰德DAPCA IV模型的军用飞机型号研制试飞费用估算模型,为试飞费用的估算提供了依据。     

用于分级燃烧的高性能燃油分配器的改进设计与仿真

为了提高燃料使用效率、降低污染物排放,在已有分级燃烧燃油分配器基础上,针对航空发动机双环腔燃烧室改进设计了1种高性能燃油分配器。简述了分级燃烧燃油分配器的工作原理,建立了其AMESim模型。根据设计要求,通过仿真验证了燃油分配器的稳定性、分配比与输入信号的稳态关系,计算了燃油分配器输出与燃油分配计划表之间的误差,分析了燃油分配器的动态特性以及对外部参数变化的鲁棒性,并且针对该分配器的非线性特性提出了解决办法。仿真结果表明：与文献[4]所设计的燃油分配器相比,改进设计的燃油分配器鲁棒性更好,稳态和动态性能更优。