Analytical solution methods for eigenbuckling of symmetric cross-ply composite laminates

Based on the first-order shear deformation theory, this paper explores the analytical methods for eigenbuckling of symmetric cross-ply rectangular composite laminates with a pair of parallel edges simply supported and the remaining two edges arbitrarily constrained. The main con-tribution of present paper lies in two aspects: one is to present a simple and effective analytical method, namely, the separation-of-variables method, which can generate the closed-form buckling solutions without any computational difficulty;the other is to incorporate the accurate computation method of exponential matrix into the state space technique to avoid the inevitable numerically ill-conditioned problems reported in several literatures. The results obtained via both analytical meth-ods are identical, and a good agreement with their counterparts in literature is observed. The separation-of-variables method can generate exact solutions within 1 s, which is impossible if the state space method is employed. Besides, the combination of the accurate computation method of exponential matrix and the state space method greatly improves the computational efficiency and gives correct results compared with the straightforward use of state space method.     

基于MPI的弹道仿真的并行计算研究

介绍了MPI的基本概念,列举了提高并行计算效率的一些措施,并实现了基于MPI消息传递机制的弹道仿真计算模型的并行编程,最后对并行计算和串行计算的结果进行了比较。研究结果表明,将并行计算技术应用于弹道仿真中是可行的,并获得了较高的加速比和计算效率;与单机运行相比,计算机机群可以大大缩短计算时间,提高计算效率,而且可以扩大计算规模,系统适应性和延展性较好。     

二维系统一般模型的正实控制

本文研究的是二维系统一般模型的正实控制。本文的目的是针对该模型,设计一个状态反馈控制器,使得闭环系统是稳定的并且闭环传递函数是延展严格正实的,所得到的解是通过线性矩阵不等式给出,通过解决该线性矩阵不等式可获得期待的状态反馈控制器。最后,我们提供了一个数值算例来验证提到方法的有效性。     

分区并行跨声速流的计算

本文采用求解Ｎ－Ｓ方程方法计算了轴对称钝头倒锥体外形的跨声速大迎角层流流动。     

Adaptive mesh refinement computation of acoustic radiation from an engine intake

A block-structured adaptive mesh refinement (AMR) method was applied to the computational problem of acoustic radiation from an aeroengine intake. The aim is to improve the computational and storage efficiency in aeroengine noise prediction through reduction of computational cells. A parallel implementation of the adaptive mesh refinement algorithm was achieved using message passing interface. It combined a range of 2nd- and 4th-order spatial stencils, a 4th-order low-dissipation and low-dispersion Runge–Kutta scheme for time integration and several different interpolation methods. Both the parallel AMR algorithms and numerical issues were introduced briefly in this work. To solve the problem of acoustic radiation from an aeroengine intake, the code was extended to support body-fitted grid structures. The problem of acoustic radiation was solved with linearised Euler equations. The AMR results were compared with the previous results computed on a uniformly fine mesh to demonstrate the accuracy and the efficiency of the current AMR strategy. As the computational load of the whole adaptively refined mesh has to be balanced between nodes on-line, the parallel performance of the existing code deteriorates along with the increase of processors due to the expensive inter-nodes memory communication costs. The potential solution was suggested in the end.     

签派员自我效能对工作压力源和幸福感的影响

以飞行签派员的工作角色压力源和工作幸福感为切入点，考察了飞行签派员工作压力源与工作幸福感之间的相关关系，并对飞行签派员的一般自我效能与工作压力源和工作幸福感的调节关系进行了探索。通过对309名民用航空飞行签派员进行的调查，使用相关分析与回归分析技术，发现飞行签派员工作角色压力源各维度（角色冲突、角色模糊和角色负载）与工作幸福感各维度（工作满意度、身体紧张和精神紧张）的相关系数分别在0．01水平上达到了显著，飞行签派员的工作压力源对飞行签派员的工作幸福感具有预测作用。结果显示，飞行签派员的一般自我效能感对角色冲突-工作满意度、角色冲突-精神紧张、角色负载-工作满意度、角色负载-身体紧张、角色负载-精神紧张之间的关系有显著的调节作用，而对角色模糊和工作幸福感各雏度之间的关系及对角色冲突-身体紧张之间的关系没有显著的调节作用。     

Love Waves in Layered Graded Composite Structures with Imperfectly Bonded Interface

Theoretical analysis and numerical calculations of Love wave propagation in layered graded composites with imperfectly bonded interface are described in this paper. On the basis of WKB method, the approximate analytic solutions for Love waves are obtained. By the interface shear spring model, the dispersion relations for Love waves in layered graded composite structures with rigid, slip, and imperfectly bonded interfaces are given, and the effects of the interface conditions on the phase velocities of Love waves in SiC/Al lay- ered graded composites are discussed. Numerical analysis shows that the phase velocity decreases when the defined flexibility parameter is greater. For the general imperfectly bonded interface, the phase velocity changes in the range of the velocities for the rigid and slip interface conditions.     

A multi-epoch study of the C IV absorption variability in the broad absorption line quasar APM 08279+5255

Broad absorption line (BAL) variability potentially represents a powerful tool to investigate the physical nature and the structure of gas outflows in active galactic nuclei. Most existing BAL variability studies rely on observations taken at a few epochs for samples of tens of BAL QSOs. In this study we present the first “monitoring” of a single object, APM 08279+5255, which has been observed more than 20 times since 2003. All available spectra from the literature have also been analysed, including two high resolution spectra, extending the time interval from 1998 to 2012. A relative stability of the shape of the absorption profile is found. At the same time significant variations of the equivalent width are observed. A correlation of the BAL equivalent width with the QSO luminosity is found for the first time. These results suggest that changes in the ionisation state of the gas are causing opacity changes.     

Low ionization lines in high luminosity quasars: The calcium triplet

In order to investigate where and how low ionization lines are emitted in quasars we are studying a new collection of spectra of the CaII triplet at λ8498, λ8542, λ8662 observed with the Very Large Telescope (VLT) using the Infrared Spectrometer And Array Camera (ISAAC). Our sample involves luminous quasars at intermediate redshift for which CaII observations are almost nonexistent. We fit the CaII triplet and the OI λ8446 line using the Hβ profile as a model. We derive constraints on the line emitting region from the relative strength of the CaII triplet, OI λ8446 and Hβ.     

飞机虚拟仪表建模仿真关键技术研究

将介绍虚拟仪表设计软件的设计思路和功能作用。首先介绍了现有的虚拟仪表设计方法，分析其优缺点；之后介绍自主研发的虚拟仪表设计软件的特点，分析设计思路，分解介绍各模块的功能，给出仿真案例及最后的仿真效果。该虚拟仪表设计软件完全自主研发，具有易用性、可迅速建模、容易更改，模块化，通用性等特点。