用直接模拟蒙特卡罗法求高温混合气体的热传导系数

本文在局域热平衡条件下，从传统现象产生的机出发，建立了气体热传导系数数值实验的物理模型。采用ＤＳＭＣ法，对高温混合气体热传导系数的实验过程进行数值模拟。考虑了真实气体的化学反应、内部自由度的激发等，对高温（２０００－１００００Ｋ）真实气体混合物的热传导系数的实体过程进行了数值模拟。获得了纯空气组元的真实热传导系数。经与热传导系数实测数据（４７３－１４７３Ｋ）和国外最新计算结果（２０００～１００００     

残余气体分析技术在"海洋一号"正样星热试验中的应用

文章介绍了残余气体分析技术在“海洋一号”正样星真空热试验中的应用。目前,国内外星船试验中的残余气体分析,一般都是将仪器探头安装在真空容器壁上,所测结果主要是器壁与热沉之间气体的成份。针对这次试验提出的测量星体附近气体成份的特殊要求,采用了将测量探头前接集气管的特殊方法,从而真实有效地测量到星体附近的残余气体成份。     

压缩空气瓶内凝结水水位检测方法的探讨

由于压缩空气瓶在使用过程中会出现瓶内残留凝结水的现象,从而影响压缩空气瓶的容积,并产生化学腐蚀,影响气瓶的整体强度和耐压性能及其的寿命。为此,应掌握气瓶内凝结水水位情况,并且提高检测水位准确度。提出了一种利用气体状态方程来计算压缩空气瓶的冷凝水水位新见解,对压缩空气瓶的安全使用具有重要意义。     

红外气体分析中环境影响的补偿方法研究

环境温度、总压影响是红外气体分析中难以有效解决的主要问题之一，本文以二氧化碳气体为测量对象，采用实验手段，单片机和数据自理技术建立了环境温度、总压对红上气体分析影响的补偿数学模型和求解方法，并进行了实验验证，研究的内容为红外气体分析中影响影响的外补偿开始辟了一条新的途径，具有广阔的应用前景。     

气体浮环动静压混合轴承的特性分析

本文对气体浮环动静压混合轴承的静动态特性进行了研究,并给出计算其高速稳定性的简单方法。理论分析与实验结果表明:环面浅腔二次节流动静压混合型气体浮环轴承的高速稳定性是最佳的。     

局部进气ATR涡轮性能影响因素数值模拟研究

为研究局部进气条件下ATR涡轮内的流动特性,对局部进气涡轮进行定常和非定常数值模拟.定常计算采用冻结转子方法,改变动叶与静叶的周向相对位置研究涡轮内流场特征;改变进气扇区布局、进口参数和局部进气度,研究其对涡轮性能的影响.研究结果表明,对于给定局部进气度,进气扇区整体布局时,涡轮性能的优越性最大;在局部进气ATR涡轮的设计中,需要综合考虑流量、效率和功率3个因素来决定局部进气度.不同位置定常流动结果的平均值与非定常流动的时均值存在差异,非定常计算更好地展示了静叶尾迹和流动积累效应的影响,因而更加可靠.     

Transient simulation of a differential piston warm gas self-pressurization system for liquid attitude and divert propulsion system

In order to obtain the dynamic characteristics of a differential piston warm gas selfpressurization system for liquid attitude and divert propulsion system, a transient model is developed using the modular modeling method. The system includes the solid start cartridge,pressure-amplified tank with liquid monopropellant, liquid regulator, gas generator, and pipes.The one-dimensional finite-element state-variable model is applied to the pipes and the lumped parameter method is adopted for the other modules. The variations of the system operation parameters over time during the startup, steady-state, and pulsing operational processes are obtained from the transient model, and the characteristics of starting time changing with different system parameters are also analyzed. It is shown that the system startup process can be divided into three distinct processes. The starting time monotonically changes with variations of the liquid regulator parameters, first decreasing and then increasing with the mass change of the solid propellant charge of the start cartridge, initial gas cavity volume of the pressure amplified tank and initial gas cushion of the propellant tank. The starting time can be reduced to less than 1.0 s(0.68–0.75 s for the current system). For meeting the deviation requirements of ±10% of the steady-state propellant tank pressure, the positive deviation requirement is assured by the self-locking pressure and the negative deviation can be assured within an allowable maximum propellant tank volume flowrate(1.6 times the design value for the proposed system) for downstream thrusters for a designed system. The results from the simulation are useful as a guide for further system design and testing.     

Working processes in the solid-propellant low-temperature aerosol generator with an inert heatexchanger

Alignment charts that make it possible to select a standard size of inert heatexchanger structures with specified output characteristics and a developed scheme of the low-temperature aerosol generator are presented.     

Thermodynamic features of aircraft diagonal gas turbines

An effect of the Coriolis forces on the process of gas expansion in the turbine stage is considered. Expressions for efficiency with regard for the radial flow passage are derived. The calculation results and statistical data on the geometric parameters of diagonal stages are presented.     

推进剂重定位过程仿真与分析

为了拓展低温上面级滑行时间，满足深空探测任务需求以及提升运载火箭任务适应性，中国未来型号研制将采用间歇沉底的方案，其主要难点是推进剂重定位过程的研究。本文针对目前重定位仿真多为二维CFD仿真且不能准确合理地预示气泡逸出过程的问题，提出一种基于Flow-3D的三维CFD仿真方法。该方法采用卷气体积与液体体积之比（卷气率）预示气泡逸出过程，比以往采用气泡粒子数预示气泡逸出过程的方法更为合理准确。重定位及气泡逸出过程的仿真结果与半人马座落塔试验的结果具有一致性，捕捉到了重定位过程所有特征流型，且对应时刻误差不超过10%。仿真结果表明间歇沉底推进剂管理方案的可行性，并确定了某低温上面级的相关设计参数。