Analytical-HZETRN model for rapid assessment of active magnetic radiation shielding

The use of active radiation shielding designs has the potential to reduce the radiation exposure received by astronauts on deep-space missions at a significantly lower mass penalty than designs utilizing only passive shielding. Unfortunately, the determination of the radiation exposure inside these shielded environments often involves lengthy and computationally intensive Monte Carlo analysis. In order to evaluate the large trade space of design parameters associated with a magnetic radiation shield design, an analytical model was developed for the determination of flux inside a solenoid magnetic field due to the Galactic Cosmic Radiation (GCR) radiation environment. This analytical model was then coupled with NASA’s radiation transport code, HZETRN, to account for the effects of passive/structural shielding mass. The resulting model can rapidly obtain results for a given configuration and can therefore be used to analyze an entire trade space of potential variables in less time than is required for even a single Monte Carlo run. Analyzing this trade space for a solenoid magnetic shield design indicates that active shield bending powers greater than ∼15 Tm and passive/structural shielding thicknesses greater than 40 g/cm² have a limited impact on reducing dose equivalent values. Also, it is shown that higher magnetic field strengths are more effective than thicker magnetic fields at reducing dose equivalent.     

气体介质对排气式气囊缓冲特性影响研究

中国新一代载人飞船试验船研制过程中开发了一套组合式缓冲气囊.以新飞船返回舱为研究对象,通过流体力学和热力学理论推导,建立了含有内囊的组合式气囊缓冲过程动力学模型,并通过MSC-Dytran对其有效性进行了验证.之后通过仿真计算,分析了影响气囊缓冲特性的两项气体固有参数——气体自由度与摩尔质量——对气囊缓冲过程的影响.研...     

典型卫星轨道的位移损伤剂量计算与分析

位移损伤剂量是评估电子元器件在轨发生位移损伤导致性能退化的重要参数。文章首先给出了位移损伤剂量的等效原理和计算方法,即用位移损伤等效注量来表征卫星轨道带电粒子导致的位移损伤剂量;之后分别采用3种不同的太阳质子注量模型,计算了典型大椭圆轨道的位移损伤等效注量,并结合计算结果对不同模型的特点和适用性进行了分析;其后针对4种典型卫星轨道,计算了不同飞行寿命期内的位移损伤等效注量,发现不同轨道的位移损伤剂量有较大差异,并结合空间带电粒子辐射环境分布特点及卫星轨道参数等分析了差异的产生原因;最后,分析不同的太阳质子注量预估方法对位移损伤剂量计算结果的影响,总结了不同轨道、不同飞行寿命情况下卫星经受的带电粒子辐射环境的严酷程度。研究结果可为卫星内部元器件位移损伤效应防护工作提供参考。     

热力学非平衡状态下DSMC绝热壁边界的抽样方法

从直接模拟蒙特卡罗仿真DSMC方法的实现途径出发,经过分析推导,给出了一种在考虑分子转动能、振动能等热力学非平衡状态下统计求解绝热壁温的DSMC抽样方法。然后采用锥体外形的算例验证,分析了该方法在实现绝热壁条件时的统计误差。计算结果表明,此种方法能够有效地实现DSMC方法壁面处的绝热壁条件,随着采样步数的增加,其边界条件实现时的统计误差不断降低,该方法收敛后的统计误差可降至0.5%,能够满足工程要求。     

国外载人航天器热控技术发展分析

文章对国外载人航天器热控技术的发展进行了调研,介绍了国外典型载人航天器的主动热控系统组成,特别是国际空间站美国实验舱的主动热控系统,并对热控技术的发展进行了评述,旨在为我国空间站建设提供参考。     

火星气囊气体发生器充气过程稳压仿真研究

文章对低温和常温环境下的气囊稳压充气过程的参数进行了仿真计算。主要分析计算了气囊内外壁的对流换热、囊内气体与囊壁间辐射以及水蒸气液化等传热方式的传热量。同时,计算了在不同环境温度下,气囊内气体温度、充气质量以及充气质量流率随时间的变化关系。分析结果可以为工程研制提供参考和数据支持。     

干活塞气体流量校准装置数值模拟

为研究干活塞气体流量校准装置内气体泄漏问题,利用FLUENT软件对干活塞气体流量校准装置的运行情况进行数值模拟,包括Ф15 mm、Ф30 mm和Ф50 mm三种模型,对各工况下活塞与缸体之间气体泄漏量进行估算。研究表明,合理控制活塞与缸体之间的间隙（〈10μm）,可保证该类气体校准装置具有良好的计量性能。     

Soybean cultivar selection for Bioregenerative Life Support Systems (BLSSs) – Hydroponic cultivation

Four soybean cultivars (‘Atlantic’, ‘Cresir’, ‘Pr91m10’ and ‘Regir’), selected through a theoretical procedure as suitable for cultivation in BLSS, were evaluated in terms of growth and production. Germination percentage and Mean Germination Time (MGT) were measured. Plants were cultivated in a growth chamber equipped with a recirculating hydroponic system (Nutrient Film Technique). Cultivation was performed under controlled environmental conditions (12 h photoperiod, light intensity 350 μmol m⁻² s⁻¹, temperature regime 26/20 °C light/dark, relative humidity 65–75%). Fertigation was performed with a standard Hoagland solution, modified for soybean specific requirements, and EC and pH were kept at 2.0 dS m⁻¹ and 5.5 respectively.     

气膜约束对轴系固有频率影响的试验

对10kg转子进行自由状态和有气膜约束两种状态下的试验模态分析,试验结果给出了转子平动、锥动和一阶弯曲时的固有频率及其振型等模态参数,分析了轴承供气压力变化对轴系固有频率的影响.进行了轴系升降速试验,结果表明:气膜约束下的模态分析结果比自由状态下的更接近于升降速试验的结果.试验结果为气体轴系固有频率的确定以及控制参数的选取提供了依据,也为下一步轴系振动控制奠定了基础.      

恒压式气体流量计变容室截面面积测量技术研究

为了研制恒压式气体微流量计,设计了以波纹管为主体的变容室,并对波纹管变容室截面面积进行了测量。采用多项式拟合公式对波纹管截面面积测量结果进行了修正,避免了波纹管非线性的影响,结果表明修正后偏差小于0.16%,截面面积的测量结果合成标准不确定度小于0.53%,可以满足使用要求。