圆盘类钛合金零件的精密加工

文章介绍了以钛合金为材料的某型号圆盘类结构件的结构和加工特点、主要表面加工措施 等,通过采用合理的装夹方法和加工方法,选择合理的切削工艺参数和刀具参数,安排合适的热处理,解决 了高精度薄壁圆盘类结构件的加工难题,为圆盘类钛合金结构件的加工积累了经验。     

JMASS环境下的飞行仿真组件集成研究

简要介绍了联合建模与仿真系统(JMASS)的基本概念,分析了JMASS的结构和组成。进一步以一个飞行仿真组件的集成为实例,阐述了如何进行基于JMASS仿真环境的仿真子系统开发,特别研究了如何给已有仿真组件增加设计专门针对JMASS环境而的接口的技术,使现有组件能够顺利集成到JMASS环境下,并使之正确运行。     

空客A320鲨鳍小翼燃油节油性能分析

通过对比已选装和未选装鲨鳍小翼飞机的燃油消耗率,找出了节油效率和鲨鳍小翼改装成本之间的平衡点,为选装鲨鳍小翼的决策提供技术支持和数据参考。     

膜分离器及其机载应用

为了满足飞机放火防爆要求，膜分离器作为机载油箱惰化系统的关键部件在国外军、民机已经装机使用，在国内膜分离器处于研制阶段，正逐步向军、民用飞机推广应用。分析了国内外现状，对膜分离器工作机理进行了阐述，详细论述了膜分离器研制过程中涉及到的膜材料、膜制备工艺、膜分离器，总结了影响膜分离器性能的主要参数；进行了膜分离器在机载惰化中应用的试验研究，总结了研发和应用中得到的经验，有利于膜分离器今后的研发和机载惰化中的应用。     

Thick exchange layer evaporation model with natural convection effect and evaporation experimental study for multicomponent droplet

In order to investigate the high-temperature evaporation characteristics of multicomponent liquid fuel, three kinds of blended fuel: n-heptane/n-decane/RP-3 aviation kerosene-ethanol were experimentally studied with and without forced convection. Further, based on zero-diffusion and infinite diffusion concept, this study expanded Thick Exchange Layer evaporation model with Natural Convection effect (NC-TEL) to multicomponent liquid fuels. The experimental results show that the droplet evaporation rate increases significantly with the increase of ambient temperature. Higher temperature leads to more significant relationships between the composition ratio and the evaporation rate. The effect of forced convection is not obviously under the circumstance in this paper. Then, the evaporation models were validated by experimental data. In general, the new NC-TEL model behaves better than the Ranz-Marshall (R-M) model, and the prediction accuracy at high temperature is improved by 8% to 35%. In lower temperature conditions, the prediction of zero-diffusion NC-TEL model is better than the infinite diffusion NC-TEL model. In high-temperature conditions, for n-heptane-ethanol droplet, the predictions of NC-TEL model are accurate, but for n-decane/RP-3 aviation kerosene-ethanol, the predictions are lower than experimental results. This may be caused by the micro-explosion phenomenon and the Marangoni phenomenon.     

基于EGView的SR20飞机的发动机爆震分析

基于EGView软件对SR20飞机出现的多起发动机CHT异常升高故障进行了分析，结果表明出现了早燃引发的爆震，进一步对爆震发生的几率以及如何减小爆震的强度和持续时间进行了研究，并就该机型在运行中减少爆震的发生提出了建议。     

Study of seasonal and long-term vertical deformation in Nepal based on GPS and GRACE observations

Lithospheric deformation signal can be detected by combining data from continuous global positioning system (CGPS) and satellite observations from the Gravity Recovery and Climate Experiment (GRACE). In this paper, we use 2.5- to 19-year-long time series from 35 CGPS stations to estimate vertical deformation rates in Nepal, which is located in the southern side of the Himalaya. GPS results were compared with GRACE observations. Principal component analysis was conducted to decompose the time series into three-dimensional principal components (PCs) and spatial eigenvectors. The top three high-order PCs were calculated to correct common mode errors. Both GPS and GRACE observations showed significant seasonal variations. The observed seasonal GPS vertical variations are in good agreement with those from the GRACE-derived results, particularly for changes in surface pressure, non-tidal oceanic mass loading, and hydrologic loading. The GPS-observed rates of vertical deformation obtained for the region suggest both tectonic impact and mass decrease. The rates of vertical crustal deformation were estimated by removing the GRACE-derived hydrological vertical rates from the GPS measurements. Most of the sites located in the southern part of the Main Himalayan Thrust subsided, whereas the northern part mostly showed an uplift. These results may contribute to the understanding of secular vertical crustal deformation in Nepal.     

月球探测器加速度响应预测的时域子结构方法

航天器结构的日益复杂和庞大为全系统级的动力学仿真带来了更大的困难和挑战,目前主要采用动态子结构法来提高分析求解效率,并解决不同设计部门之间的模型共享和技术保护问题。月球探测器软着陆阶段的冲击力学环境一般由加速度冲击响应谱描述,由于高阶振型对结构加速度响应的影响要比对位移响应的影响大得多,所以在小阻尼情况下,经典的基于模态的子结构方法在相同截断频率下对加速度响应的预测精度远低于位移响应。为解决这一问题,引进基于脉冲响应函数的时域子结构(IBS)方法,提出了一种适用于预测加速度响应的降阶形式的迭代求解格式。利用探测器着陆数值模拟试验中测得的缓冲机构作用力作为激励,分别采用固定界面模态综合(CB)法和IBS方法分析了月球探测器的加速度响应。数值算例表明,后者在计算精度和求解效率方面均高于前者,并说明基于脉冲响应函数的子结构方法适于对月球探测器加速度响应进行高精度快速预测。     

大部件对接中iGPS高精度位姿测量优化设计

 为保证大部件对接位姿测量精度,提高对接测量效率,实现大部件最优位姿装配,提出了基于iGPS测量系统的大部件对接位姿测量优化设计方法。首先,基于iGPS系统测量模型和不确定度模型建立对接测量网络,并对其网络测量精度进行仿真分析,优化设计了对接测量网络iGPS多发射器的布站方式;其次,基于对大部件位姿参数求解模型及不确定度模型的仿真分析,优化设计了调姿基准点的布设方式;最后,对某机型大部件对接进行了位姿测量方式的对比实验。结果表明,经过位姿测量优化设计后,大部件对接测量x、y、z的位置调整不确定度均小于0.16 mm,姿态滚转角、俯仰角和偏航角的角度调整不确定度均小于3.1",相较于未经布站优化设计的测量方式,精度至少提高了20%。由此证明该测量优化设计方案能够高效、高精度地对移动大部件进行实时位姿测量,在有效提高大部件对接位姿测量效率及精度方面是可行的。     

Robust control for constant thrust rendezvous under thrust failure

A robust constant thrust rendezvous approach under thrust failure is proposed based on the relative motion dynamic model. Firstly, the design problem is cast into a convex optimization problem by introducing a Lyapunov function subject to linear matrix inequalities. Secondly, the robust controllers satisfying the requirements can be designed by solving this optimization problem.Then, a new algorithm of constant thrust fitting is proposed through the impulse compensation and the fuel consumption under the theoretical continuous thrust and the actual constant thrust is calculated and compared by using the method proposed in this paper. Finally, the proposed method having the advantage of saving fuel is proved and the actual constant thrust switch control laws are obtained through the isochronous interpolation method, meanwhile, an illustrative example is provided to show the effectiveness of the proposed control design method.