多位数频标测量系统

介绍一种非整数(多位数)频标频率测量系统的工作原理、误差分析及主要技术指标。频率测量范围从1～80MHz,系统的不确定度α<5×10~(-11)/s。该系统还可以同时进行多台频标的自动测试(配上计算机和多路射频开关)。     

悬臂空心梁式加速度计的设计

分析证明:悬臂梁式加速度计的灵敏度与它的谐振频率的平方成反比。因此,欲展宽频带而保持灵敏度不变就很困难。利用应力集中的方法可以有效地解决这一问题。采用空心梁结构不仅能产生应力集中而且能减少梁的自身质量带来的影响,可以有效地展宽频带。文中给出了几种梁的刚度计算。     

Principal components in the PG-X-ray QSO sample

We have performed a spectral principal component analysis for a complete sample of 22 low redshift QSOs with spectra from Ly to H, and found three significant principal components, which account for 78% of the spectrum-to-spectrum variance. We present strong arguments that the first principal component represents the Baldwin effect, relating equivalent widths to the luminosity (i.e. accretion rate). The second component represents continuum variations, probably dominated by intrinsic reddening. The third principal component is directly related to broad emission-line width and X-ray spectral index, and therefore probably driven by Eddington accretion ratio, L/L_Edd. The third set of relationships tie directly to the optical Principal Component 1 found by Boroson and Green [Boroson, T., Green, R.F., Astrophys. J. Suppl. 80, 109, 1992 (BG92)], and are the primary cause of scatter in the Baldwin relationships.     

微波泄漏对光抽运铯束频标准确度影响的分析

微波泄漏是影响光抽运铯原子钟准确度的主要因素之一. 傅里叶变换分析法是分析其影响的主要手段,但该方法只能用来分析有效原子速度分布很窄的情况.通过分析和计算,推导出频移随漏场的位置、相位和幅度变化的关系式.计算和分析的结果表明,漏场引起频移大小和漂移区的长度、输入微波功率值和漏场的相位、强度和位置等有关.所得的结果和用傅里叶变换方法分析所得的结果是一致的,分析的方法不受原子有效速度限制.     

应用加权中值滤波法检测薄壁梁式挠性器件下摆量

应用加权中值滤波法对薄壁梁式挠性器件下摆量进行高准确度CCD检测。薄壁梁式挠性器件在测量过程中测量图像存在高频抖动现象,因此测量准确度不高,运用加权中值滤波后使用最小二乘法细分技术,可以在实现提高测量准确度的同时,消除高频抖动带来的误差,从而可以有效提高CCD测量薄壁梁式挠性器件下摆量的准确度。实验表明,该方法比传统测量方法准确度提高20倍以上。     

Hexapod多自由度微激励系统的振动时域波形控制

摘要： Hexapod多自由度微激励系统常用于航天器有效载荷在轨微振动环境的模拟，但采用现有控制方法无法精确稳定跟踪低频正弦加速度，这是由于系统耦合度高、非线性在低频段较强，被控对象相位滞后过大造成的.针对此问题，基于传统离线迭代控制方法，提出一种复合超前校正、多倍频陷波滤波器的改进离线迭代控制方法.其中，离线迭代进行补偿控制，超前校正进一步补偿系统相位，多倍频陷波滤波器去除非线性干扰.跟踪低频定频正弦加速度的实验结果表明，对比传统离线迭代控制方法，改进方法收敛快、控制精度高；对比现有自适应正弦振动控制方法，改进方法将符合精度要求的加速度控制频带下限由14.5 Hz扩宽至8 Hz.实验结果验证了所提方法的有效性.     

平台摇摆对卡尔曼滤波跟踪精度的影响

通过建立目标相对运动坐标系和目标相对运动观测模型,研究了在平台摇摆影响下,跟踪系统观测到的目标运动状态的变化。在分析捷联垂直基准补偿原理的基础上建立了捷联垂直基准平台摇摆角补偿模型,建立的模型结合捷联垂直基准系统的测量能力对其补偿算法进行了理论推导,使模型适用于实际捷联垂直基准系统。通过建立模型以及仿真研究了平台摇摆作用下卡尔曼滤波跟踪精度的变化,指出了摆造成卡尔曼滤波跟踪精度降低甚至离散的主要原因在于模型误差增大。设计仿真实验验证了结论的正确性,为进一步改进跟踪手段提供了理论参考。     

一次民机飞行中甚高频通信不稳定的排故

针对某型号民用飞机甚高频通信系统在飞行中出现断续故障的情况，对系统的架构进行描述，分析了故障产生的机理，提出了排故思路，记述了排故过程，并总结了甚高频通信系统的设计要点和工艺要点。     

Abnormal changes of dynamic derivatives at low reduced frequencies

A number of studies have found that abnormal changes of dynamic derivatives occurred at very low reduced frequencies, but its inducement mechanism is not very clear. This paper has researched the abnormal changes and analyzed the influence on some parameters by solving the unsteady flow around forced oscillation airfoils based on Navier-Stokes equations. Results indicate that when the reduced frequency approaches to zero, the dynamic derivatives obtained by the numerical method will diverge. We have also proven it in theory that this phenomenon is not physical but completely caused by numerical singularity. Furthermore, the abnormal phenomenon can be effectively mitigated by using the time spectral method to solve the aerodynamic forces and the integral method to obtain the dynamic derivatives. When the reduced frequency is in the range of 0.001–0.01, the dynamic derivative maintains nearly unchanged for the whole speed region. This study can provide a reference for the reasonable choice of the reduced frequency in calculations and experiments of dynamic derivatives.     

A cost driven predictive maintenance policy for structural airframe maintenance

Airframe maintenance is traditionally performed at scheduled maintenance stops.The decision to repair a fuselage panel is based on a fixed crack size threshold,which allows to ensure the aircraft safety until the next scheduled maintenance stop.With progress in sensor technology and data processing techniques,structural health monitoring (SHM) systems are increasingly being considered in the aviation industry.SHM systems track the aircraft health state continuously,lead ing to the possibility of planning maintenance based on an actual state of aircraft rather than on a fixed schedule.This paper builds upon a model-based prognostics framework that the authors developed in their previous work,which couples the Extended Kalman filter (EKF) with a first order perturbation (FOP) method.By using the information given by this prognostics method,a novel cost driven predictive maintenance (CDPM) policy is proposed,which ensures the aircraft safety while minimizing the maintenance cost.The proposed policy is formally derived based on the trade-off between probabilities of occurrence of scheduled and unscheduled maintenance.A numerical case study simulating the maintenance process of an entire fleet of aircrafts is imple mented.Under the condition of assuring the same safety level,the CDPM is compared in terms of cost with two other maintenance policies:scheduled maintenance and threshold based SHM maintenance.The comparison results show CDPM could lead to significant cost savings.