激光干涉正弦法小角度测量中有关问题探讨

分析了小角度正弦激光干涉仪的有关特性，叙述了这种方法的测量原理，计算了几种因素对测量准确度的影响，指出提高测量准确度的解决办法。     

卫星测控雷达校飞设备在飞机上的安装

介绍了某型卫星测控雷达的校飞设备以及这些设备在某型飞机上的安装方案，并对方案进行了分析，确保方案的可行性。     

超声波流量计不同运算方式对比分析

温度漂移是影响超声波流量计测量精度的一个重要因素,本文从算法上提出一种不受其影响的数学模型,以使相应的硬件简单化.该方法已应用在超声波流量计中,收到了很好的效果.     

频率计数器在航天器信号频率测量中的适用性分析

从频率计数器的工作原理出发,分析了航天器测控通信中常用的调相信号、调频信号和相移键控信号的频率测量误差,给出了调相信号和调频信号的测量误差表达式。使用频率计数器对上述3种航天器信号进行了频率测量试验。理论分析和试验结果表明,频率计数器适用于航天器调相信号和调频信号的频率测量,不适用于相移键控信号的频率测量。在实际使用中,为保证测量精度,应根据被测信号的调制方式选择适当的测量方法。     

Monthly mean foF2 model for an African low-latitude station and comparison with IRI

We have employed the hourly values of the ionospheric F-region critical frequency (foF2) obtained from Ouagadougou ionosonde, Burkina Faso (geographic coordinates 12° N, 1.8° W) during the interval of 1985–1995 (solar cycle 22) and solar radio flux of 10 cm wavelength (F10.7) to develop a local model (LM) for the African low-latitude station. The model was developed from regression analysis method, using the two-segmented regression analysis. We validated LM with foF2 data from Korhogo observatory, Cote d’Ivorie (geographical coordinates 9.3° N, 5.4° W). LM as well as the International Reference Ionosphere (IRI) agrees well with observations. LM gave some improvement on the IRI-predicted foF2 values at the sunrise (06 LT) at all solar flux levels and in all seasons except June solstice. The performance of the models at the representing the salient features of the equatorial foF2 was presented. Considering daytime and nighttime performances, LM and IRI are comparable in low solar activity (LSA), LM performed better than IRI in moderate solar activity (MSA), while IRI performed better than LM in high solar activity (HSA). CCIR has a root mean square error (r.m.s.e), which is only 0.10 MHz lower than that of LM while LM has r.m.s.e, which is about 0.05 MHz lower than that of URSI. In general, our result shows that performance of IRI, especially the CCIR option of the IRI, is quite comparable with the LM. The improved performance of IRI is a reflection of the numerous contributions of ionospheric physicists in the African region, larger volume of data for the IRI and the diversity of data sources, as well as the successes of the IRI task force activities.     

《高频电子线路》课程“相乘器”教学策略

相乘器是高频电子线路课程中的一个重要单元电路。掌握相乘器的组成、基本原理、分析方法以及器件特点是通信电子信息类学生学好调制、检波以及混频电路的关键所在,讨论非线性器件二极管在开关状态下组成"相乘器"的教学策略对教学活动具有重要意义。     

Three-line structured light vision system for non-cooperative satellites in proximity operations

Adapter ring is a commonly used component in non-cooperative satellites, which has high strength and is suitable to be recognized and grasped by the space manipulator. During proximity operations, this circle feature may be occluded by the robot arm or limited field of view. Moreover, the captured images may be underexposed when there is not enough illumination. To address these problems, this paper presents a structured light vision system with three line lasers and a monocular camera. The lasers project lines onto the surface of the satellite, and six break points are formed along both sides of the adapter ring. A closed-form solution for real-time pose estimation is given using these break points. Then, a virtual structured light platform is constructed to simulate synthetic images of the target satellite. Compared with the predefined camera parameters and relative positions, the proposed method is demonstrated to be more effective, especially at a close distance. Besides, a physical space verification system is set up to prove the effectiveness and robustness of our method under different light conditions. Experimental results indicate that it is a practical and effective method for the pose measurement of on-orbit tasks.     

网络分析仪时域测量技术综述

矢量网络分析仪直接测量两端口网络的微波特性，是射频微波测量领域中应用最广泛的仪器之一。网络分析仪时域技术在故障点定位、多路径消除、不连续性测试等应用中有着非常重要的意义，但是如何合理选取时域模式和设置参数是困扰工程研究人员的难点。本文对网络分析仪时域测量模式、离散数据取样、频率截断、窗函数、归一化等时域测量理论进行详细介绍，给出了时域测量范围和分辨力的计算方法，并以开路器的时域响应为例，说明了时域测量相关参数的设置依据。     

Boundary condition modelling and identification for cantilever-like structures using natural frequencies

The actual boundary conditions of cantilever-like structures might be non-ideally clamped in engineering practice, and they can also vary with time due to damage or aging. Precise modelling of boundary conditions, in which both the boundary stiffness and the boundary mass should be modelled correctly, might be one of the most significant aspects in dynamic analysis and testing for such structures. However, only the boundary stiffness was considered in the most existing methods. In this paper, a boundary condition modelling and identification method for cantilever-like structures is proposed to precisely model both the boundary stiffness and the boundary mass using sensitivity analysis of natural frequencies. The boundary conditions of a cantilever-like structure can be parameterized by constant mass, constant rotational inertia,constant translational stiffness, and constant rotational stiffness. The relationship between natural frequencies and boundary parameters is deduced according to the vibration equation for the lateral vibration of a non-uniform beam. Then, an iterative identification formulation is established using the sensitivity analysis of natural frequencies with respect to the boundary parameters. The regularization technique is also used to solve the potential ill-posed problem in the identification procedure.Numerical simulations and experiments are performed to validate the feasibility and accuracy of the proposed method. Results show that the proposed method can be utilized to precisely model the boundary parameters of a cantilever-like structure.     

某型干扰机干扰效果提升研究

通过研究某型干扰机对多普勒雷达速度跟踪系统的干扰方式，分析假多普勒频率产生的干扰工作机理，研究对抗科目训练中该模式干扰效果不佳的具体原因，提出了采用数字移向技术替代行波管移相，增大对雷达回波原载频的抑制度，增强干扰效果。通过对样机的测试验证，给出了两种移相电路的假多普勒干扰比较。