Stall flutter prediction based on multi-layer GRU neural network

The modeling of dynamic stall aerodynamics is essential to stall flutter, due to the flow separation in a large-amplitude pitching oscillation process. A newly neural network based Reduced Order Model (ROM) framework for predicting the aerodynamic forces of an airfoil undergoing large-amplitude pitching oscillation at various velocities is presented in this work. First, the dynamic stall aerodynamics is calculated by solving RANS equations and the transitional SST-γ model. Afterwards, the stall flutter bifurcation behavior is calculated by the above CFD solver coupled with structural dynamic equation. The critical flutter speed and limit-cycle oscillation amplitudes are consistent with those obtained by experiments. A newly multi-layer Gated Recurrent Unit (GRU) neural network based ROM is constructed to accelerate the calculation of aerodynamic forces. The training and validation process are carried out upon the unsteady aerodynamic data obtained by the proposed CFD method. The well-trained ROM is then coupled with the structure equation at a specific velocity, the Limit-Cycle Oscillation (LCO) of stall flutter under this flow condition is predicted precisely and more quickly. In order to predict both the critical flutter velocity and LCO amplitudes after bifurcation at different velocities, a new ROM with GRU neural network considering the variation of flow velocities is developed. The stall flutter results predicted by ROM agree well with the CFD ones at different velocities. Finally, a brief sensitivity analysis of two structural parameters of ROM is carried out. It infers the potential of the presented modeling method to depict the nonlinearity of dynamic stall and stall flutter phenomenon.     

复合材料薄壁梁扭转的高次翘曲理论

利用翘曲连续修正概念导出表示剖面翘曲位移的形函数序列,据此建立单闭室复合材料薄壁梁扭转分析的高次翘曲理论,并结合分层的具体情况,考察分层对复合材料薄壁梁扭转翘曲的影响。算例表明,该高次翘曲理论具有很好的收敛性。     

飞机电网零序阻抗的数值计算

从麦克斯韦方程出发,推导了飞机电网零序阻抗参数的计算公式。对几种不同敷设方式载流导线的零序阻抗进行了计算,其结果与标准值较为接近。这种数值计算方法比传统的解析近似估算方法更为合理和准确。     

关于建立高阶差分格式的问题

为了能在不太密的网格上捕捉到流场的细致结构。通常采用高阶精度的差分 式进行数值模拟。为能抑制计算中和在激波附近产生的虚假波动,本文从物理构思出发,提出了建立高阶格式的两个基本原则,作者称之为抑制波动的原则和稳定性原则。     

基于神经网络的导弹制导控制一体化反演设计

针对制导控制一体化(IGC)模型中的不确定性难以进行估计补偿的问题,提出了基于神经网络的IGC反演设计方法。首先,根据弹目相对运动关系以及导弹自动驾驶仪模型建立了三维空间中的IGC模型。其次,针对由目标机动引起的模型不确定性,提出应用高阶滑模微分器(SMD)对导弹导引头获得的弹目相对运动信息进行微分,从而估计出目标加速度的方法,然后考虑导弹自身由于参数摄动以及未建模动态引起的模型不确定性,应用SMD和神经网络模型进行在线逼近补偿,基于反演控制理论设计了带有SMD和神经网络模型的IGC算法,应用李雅普诺夫稳定性理论对所设计的控制算法进行了稳定性证明。最后,进行了导弹六自由度仿真,验证了所设计控制算法的有效性。     

Fractional order tension control for stable and fast tethered satellite retrieval

The retrieval of a tethered satellite system is intrinsically unstable. This paper develops a new control strategy to retrieve the tethered satellite system stably and quickly using the fractional order control theory. The governing equation of the tethered satellite system and classic linear feedback tension control law were first reviewed and examined as a benchmark. Then, a new fractional order tension control law has been to avoid the tethered satellite winds around the main satellite near the end of retrieval by existing integer order tension control laws. The newly proposed control law has been discretized and implemented by the Laplace transform and Tustin operator. Unlike the existing integer order control laws, which are based on the feedback of current state and memoryless, the fractional order control law has the memory of previous states and thus controls the tether retrieval more smoothly while maintaining the retrieving speed. The effectiveness and advantage of the new fractional order tension control law is demonstrated numerically by comparing with its integer order counterpart. The results show that the new control law not only retrieves the subsatellite without winding around the main satellite, but also provides a better control performance with smaller in-plane libration angles.     

多分量雷达辐射源信号的检测与分离

针对多分量雷达辐射源信号难以有效检测与分离的问题,提出了时频变换结合时变滤波的方法。通过图像分割中的区域生长法在时频平面对各分量进行检测,对其中的线性调频分量采用分数阶傅里叶变换进行优先分离,再对时频或频域没有耦合的分量进行滤波,最后通过支持向量机划分分类线,用于时频耦合分量的分离。仿真实验结果表明,该方法可以对多分量信号进行有效的检测与分离。     

小步长低阶Collocation方法轨道积分性能研究

介绍了Collocation方法的原理及误差构成,以Collocation方法在逐历元滤波轨道解算中的应用为切入点对小步长低阶Collocation方法轨道积分的性能进行了研究。分别就二体问题及真实GPS星座卫星轨道为对象进行了一系列验算,得到了一些有益结论：就积分方法本身性能而言,Collocation积分方法较传统数值积分法精度要高且稳定性要好;在一定长度的积分步长范围内,将小步长低阶Collocation方法用于滤波轨道解算是可行且有效的。 但在积分步长很小的情形下,从计算效率方面考虑,不推荐使用Collocation方法;利用小步长低阶Collocation方法取代大步长高阶方法能提高效率且可抑制蚀现象引起的积分结果发散。经试验表明：选用积分步长为900s的4阶方法是合适的。     

单音干扰下扩频测控信号伪码跟踪性能研究

扩频测控信号的伪码跟踪性能直接关系到测控系统的测距精度。以伪码跟踪环中鉴相曲线平衡点的过零偏移为研究对象,推导了音频干扰条件下扩频测控信号伪码跟踪的干扰最大误差;并针对干扰最大误差需考虑具体鉴相算法的特点,提出基于相关曲线主瓣的二阶中心矩扩展因子的性能评价方法。该方法利用伪码相关曲线主瓣在干扰前后的畸变情况,反映干扰对伪码跟踪性能的影响。仿真分析表明,干扰最大误差的理论及仿真结果和二阶中心矩扩展因子所得结论一致,从而验证了干扰最大误差理论的正确性以及所提性能指标的有效性。     

立楔诱导高超声速分离流动的被动控制研究

双模态超燃冲压发动机由于压力扰动可能发生不起动现象,造成推力严重下降,对飞行稳定性与飞行安全具有很强的破坏性.不起动初始阶段主要受到激波与边界层相互作用引起的流动分离影响,希望通过控制分离达到改善流动的目的.采用5阶特征型WENO(weighted essentially non-oscillator)格式与3阶TVD(total variation diminishing)型Runge-Kutta(R-K)格式的高精度数值方法,求解三维Navier-Stokes(N-S)方程,研究与分析了凸起物和被动吹吸两种被动控制方法对激波与边界层相互作用导致的高超声速流动分离现象的控制效果.结果表明:凸起物通过诱导流向涡形成,改变空间压力分布,减弱二次分离,影响分离结构;吹吸方式的被动控制技术通过平衡分离区与再附区之间的高低压差,降低逆压梯度,使压力分布与分离区域发生改变.