基于相空间重构的网络流量RBF神经网络预测

应用混沌理论,分析了网络流量,用单变量的网络流量时闯序列重构与网络动力系统等距同构的相空间,进而计算了实际网络的关维数和Lyapunov指数,并证实了网络流量存在混沌特性;据此建立了基于径向基函数（RBF）神经网络的模型,并对实际网络数据流进行了预测。仿真结果表明,相对于其他前馈神经网络预测,基于混沌理论的RBF神经网络预测方法学习速度快,预测精度高。     

定常基线卫星编队构形设计

采用动力学法研究了卫星编队的相对运动特性,根据星间相对基线的定义,仔细推导了星间相对基线与卫星编队构形参数之间的关系,并根据此关系定义了一种可以较好地反映星间相对基线运动稳定性的指标,即稳定度.在一个轨道周期内,分析了三种特殊卫星编队的最大水平基线和最大垂直基线在相同稳定度下的稳定时间.结果表明,这三种编队构形不能满足水平基线和垂直基线同时定常的要求.由此出发,重点研究了可以使星间相对基线定常的条件,并得出了相应的结论.水平基线定常的充要条件为三个约束关系式,垂直基线定常的充要条件为两个约束关系式.由此条件同时可知,两星编队无法满足水平基线和垂直基线同时定常的要求,因此,至少需要三星编队才可以达到此要求.最后,按照本文所得结论,设计了一个水平基线和垂直基线同时定常的三星编队.利用成熟软件对设计结果进行了分析,分析结果表明了本设计方法的正确性.      

微小刀具同轴全息对刀方法研究

针对现有对刀方法存在的各种不足,提出了一种微小刀具的同轴全息对刀方法.在对全息成像原理和全息图像关键问题进行研究与分析的基础上,搭建了一套微细铣刀的全息对刀检测装置,并利用标准刀具在五轴加工中心进行了微细铣刀的对刀测量试验.试验结果表明:该对刀装置能够高效地进行微细铣刀的对刀检测,系统相对检测精度达5.1μm.在相同检...     

大涡模拟模型环形燃烧室污染特性

在任意曲线坐标系下,采用大涡模拟模型环形燃烧室两相燃烧流场中污染物的生成.用亚网格涡破碎(EBU)燃烧模型估算化学反应速率;分别用NO亚网格动力学模型与CO亚网格模型来模拟NO和CO的生成;采用随机离散模型模拟气液两相湍流流动,两相之间耦合采用PSIC算法.计算结果与瞬态速度场、出口温度和污染物质量分数分布的实验数据比较吻合,表明大涡模拟方法和亚网格模型可以用来预估实际燃烧室两相喷雾燃烧流场和污染物生成过程.      

空间绳系编队的动力学及稳定展开控制研究

以三角构型的空间绳系编队系统为对象开展了动力学特性分析和稳定展开控制研究。首先，针对以往编队动力学建模的精度问题，采用Lagrange法建立了系统动力学模型，建模时充分考虑了系绳的弹性，可在不增加计算量的同时保留系统的弹性特性。其次，根据所建立的动力学模型，定量分析了编队自旋稳定时自转角速度的范围，为之后的稳定展开控制提供理论依据。由于受制于执行机构精度和控制输入的限制，空间绳系编队系统是一个典型的欠驱动系统，采用分层滑模实现编队的稳定展开控制，仿真结果验证了该控制方法的有效性。     

Fast cooperative trajectory optimization and test verification for close-range satellite formation using Finite Fourier Series method

The process of formation reconfiguration for close-range satellite formation should take into account the risk of collisions between satellites. To this end, this paper presents a method to rapidly generate low-thrust collision-avoidance trajectories in the formation reconfiguration using Finite Fourier Series (FFS). The FFS method can rapidly generate the collision-avoidance three-dimensional trajectory. The results obtained by the FFS method are used as an initial guess in the Gauss Pseudospectral Method (GPM) solver to verify the applicability of the results. Compared with the GPM method, the FFS method needs very little computing time to obtain the results with very little difference in performance index. To verify the effectiveness, the proposed method is tested and validated by a formation control testbed. Three satellite simulators in the testbed are used to simulate two-dimensional satellite formation reconfiguration. The simulation and experimental results show that the FFS method can rapidly generate trajectories and effectively reduce the risk of collision between satellites. This fast trajectory generation method has great significance for on-line, constantly satellite formation reconfiguration.     

A wall-thickness compensation strategy for wax pattern of hollow turbine blade

As an important index affecting the aerodynamic performance and the structural strength of hollow turbine blades, the wall-thickness precision of the blade is mainly inherited from the positional relationship between the corresponding wax pattern and the internal ceramic core. However, due to locating errors, the actual position of ceramic core is always deviated from the ideal position, which makes it difficult to guarantee the wall-thickness precision of the wax pattern. To solve this problem, a wall-thickness compensation strategy is proposed in this paper. Firstly, based on the industrial computed tomography (ICT) technique and curve matching algorithms, a model reconstruction method is developed, with which the 3D model of a trial wax pattern can be easily constructed. After that, focusing on eliminating the wall-thickness errors of the trial wax pattern, an optimization method for the pose of the ceramic core in the wax pattern is proposed. Then, by mapping the optimal pose of the ceramic core to length adjustments of the locating rods, the wall-thickness errors of the wax pattern can be greatly reduced. A case study is also given to illustrate the effectiveness of the proposed compensation strategy.     

基于扰动观测器的无人机固定时间编队协同控制

针对无人机的编队控制问题,基于虚拟领航者编队方法,提出了 1种基于固定时间超螺旋干扰观测器的反步控制策略。首先,设计了 1种固定时间超螺旋扰动观测器,以保证在固定时间内,对无人机编队机动所受扰动的快速观测;其次,针对编队控制问题,设计了基于超螺旋扰动观测器的反步控制策略,该控制器显著降低了抖振效应;然后,使用李雅普诺夫理论和固定时间理论,分析了控制策略的固定时间稳定性;最后,通过仿真算例验证了所提出的控制策略的有效性与可行性。     

基于终端滑模的无人机编队协同控制

文章研究了具有输入受限及外部干扰的无人机编队有限时间协同控制问题。首先,引入抗饱和辅助系统来解决执行器的饱和问题,利用自适应方法对扰动上界进行估计和补偿;然后,设计新型全局快速终端滑模的控制器,使得编队内各无人机在有限时间内收敛到指定的编队位置,并通过李雅普诺夫稳定性分析方法,证明控制方法的有效性;最后,对提出的控制方法进行数字仿真,验证了实际可行性。     

Cutting force model and damage formation mechanism in milling of 70wt% Si/Al composite

High-mass fraction silicon aluminium composite(Si/Al composite) has unique properties of high specific strength, low thermal expansion coefficient, excellent wear resistance and weldability. It has attracted many applications in terms of radar communication, aerospace and automobile industry. However, rapid tool wear resulted from high cutting force and hard abrasion, and damaged machined surfaces are the main problem in machining Si/Al composite. This work aims to reveal the mechanisms of milli...