鹊克准则及尼尔一史密斯准则的应用

在采用MIL-1797-STD有人驾驶飞机飞行品质规范检验某第三代战斗机飞行品质过程中，在计算鹊克准则(即瞬时峰值比、上升时间及有效时间延迟)时，认为通过利用高阶系统传递函数求出的时间响应特性得出的结果比通过求解由飞机及控制系统组成的微分方程得出的结果更合理；在计算尼尔一史密斯准则时，提出了一种利用优化技术确定该准则的驾驶员参数kp和补偿τp1，τp2值的方法，取得了满意的效果．     

小卫星编队飞行的相对运动学方程研究

以运动学方法为基础研究了编队卫星相对运动的一种更直接方法，利用不同天体力学特性，将相对位置和速度与相对轨道参数建立了联系，首先，详细推导了以运动学方法为基础的相对运动方程，据此可直接得出环绕卫星的轨道根数，其次，为有利于相对轨道分析和设计，对相对运动方程进行了简化，最后，通过例子验证了该方法的正确性，仿真结果表明该方法是有效可行的。     

双向比对高精度物理时间同步方法

提出一种面向未来卫星在轨应用的闭环物理高精度时间同步方法。比较了所提方法与其他时间同步方法的区别与优势，建立了远程系统时间同步基本模型与误差传递模型，基于双向测距和时间传递技术分析了高精度钟差获取原理，给出了时钟调整环路的时域频域参数依赖关系。完成了高精度时间同步地面试验系统构建，测试了开环非调钟状态下钟差测量精度误差、闭环调钟状态下时间同步准确度误差以及长时运行情况下的时间同步监测结果。测试结果表明，该方法能够实现优于1 ns量级的时间同步，为高精度时间同步技术研究提供了新的途径。     

对空间碎片近距随遇悬停的控制方法及悬停燃耗分析

对空间碎片检视或抓捕操控中的悬停控制及燃耗问题进行了研究。通过C W方程，建立任务星近距随遇定点悬停控制模型，通过设计状态反馈控制器分析定点悬停的可控性以及推控要求，结果表明近距悬停需要与悬停位置相关的两个正交方向上的常值连续推力控制量，以及用于抵抗扰动的三轴向上的反馈变推力控制量。分析了近距随遇悬停的推控分系统配置，建立了长时近距随遇悬停的燃耗及燃耗速率的数学模型，最后分析了既满足安全距离需求、又满足悬停方位需求的最小悬停燃耗模型。     

Effect of blade tip winglet on the performance of a highly loaded transonic compressor rotor

The tip leakage flow has an important influence on the performance of transonic com-pressor. Blade tip winglet has been proved to be an effective method to control the tip leakage flow in compressor, while the physical mechanisms of blade tip winglet have been poorly understood. A numerical study for a highly loaded transonic compressor rotor has been conducted to understand the effect of varying the location of blade tip winglet on the performance of the rotor. Two kinds of tip winglet were designed and investigated. The effects of blade tip winglet on the compressor over-all performance, stability and tip flow structure were presented and discussed. It is found that the interaction of the tip winglet with the flow in the tip region is different when the winglet is located at suction-side or pressure-side of the blade tip. Results indicate that the suction-side winglet (SW) is ineffective to improve the performance of compressor rotor. In addition, a significant stall range extension equivalent to 33.74% with a very small penalty in efficiency can be obtained by the pressure-side winglet (PW). An attempt has been made to explain the fundamental mechanisms of blade tip winglet in detail.     

智慧温室群远程监控系统通信设计

温室监控系统是对温室环境中温度、湿度、光照度等环境因子实施监测与调控的农业设施,可确保农作物获得最适宜的生长发育环境。针对现有温室监控系统在通信上存在距离受限、组网复杂、能耗高且基本仅能实现单个温室控制的问题,设计了一种基于LoRa和NB-IoT相结合的智慧温室群远程监控系统通信模式。该模式以STM32F103C8T6单片机为核心控制器件,采用ATK-LoRa SX1278和NB-IoT模块自组无线通信网实现数据的远程交互。测试结果表明：采用该通信模式可实现温室群中各温室间距离在2km范围内的数据采集、处理和传输,其通信距离远、功耗低,数据传输可靠性符合现代化农业物联网的需求。     

Estimation of ground range on the sweep frequency backscatter leading edge

The high frequency management system with backscatter radar supplies the real time ionosphere channel conditions to high frequency users, which leads to the demand for the ground range between the radar location and the scatters on the distant ground. The ionosphere electron density profile is usually inversed to obtain the ground range. An inversion algorithm, with which the ground range on the leading edge of the backscatter ionograms can be obtained without electron density, is presented in this paper. The ray path geometry of the backscatter sounding and the change in the group path on the leading edge with operating frequency are used to derive the ground range. Synthesized backscatter ionogram and experimental backscatter ionograms are processed to validate the algorithm. The results indicate that the algorithm is usable for high frequency management system.     

用于直升机现场计量的低频振动校准技术

本文面向直升机健康与使用监测系统(HUMS)的现场计量保障需求,针对其中振动传感器在低频段尚无法实现现场校准的现状,提出了基于直线电机驱动技术的便携式低频振动校准技术方案。该方案利用高精度直线电机构造低频标准振动源,采用稳定性高的石英挠性加速度计作为标准加速度计,具有体积小、精度高、现场环境适应性好的特点,非常适用直升机HUMS的现场计量保障。根据不确定度评估结果,该方案能够实现0.5Hz～20Hz频率范围,0.01m/s~2～20m/s~2加速度范围内不超过1%的校准不确定度(k=2)。     

Reconfigurable Flight Control Design for Combat Flying Wing with Multiple Control Surfaces

With control using redundant multiple control surface arrangement and large-deflection drag rudders,a combat flying wing has a higher probability for control surface failures.Therefore,its flight control system must be able to reconfigure after such failures.Considering three types of typical control surface failures(lock-in-place(LIP),loss-of-effectiveness(LOE) and float),flight control reconfiguration characteristic and capability of such aircraft types are analyzed.Because of the control surface redundancy,the aircraft using the dynamic inversion flight control law already has a control allocation block.In this paper,its flight control configuration during the above failures is achieved by modifying this block.It is shown that such a reconfigurable flight control design is valid,through numerical simulations of flight attitude control task.Results indicate that,in the circumstances of control surface failures with limited degree and the degradation of the flying quality level,a combat flying wing adopting this flight control reconfiguration approach based on control allocation could guarantee its flight safety and perform some flight combat missions.     

运动单站干涉仪相位差直接定位方法

针对传统干涉仪测向定位在低信噪比(SNR)下性能降低、多频段系统复杂等缺点,本文直接利用运动单站干涉仪模糊相位差(PD)实现对地面静止辐射源定位.为解决该定位问题,结合干涉仪相位差的几何特性,提出了一种多角度距离参数化高斯和滤波(MB-RP-GMF)定位解算方法,利用相位差误差检测获得多个初始方位角,通过距离参数化得到一组滤波初始值,采用扩展卡尔曼滤波(EKF)进行定位计算.仿真结果表明,该定位方法在低信噪比下优于仅测向(BO)定位,且仅采用一组干涉仪便可对多个频段辐射源进行定位.