底部排气弹减阻特性的合理设计

本文提出了底部排气弹减阻特性设计的一般原则与方法。给出了达到最优弹道性能设计的方法与约束条件。该方法对底排减阻特性研究与底部排气弹设计有较大的理论与实用价值。     

Simultaneous ISAR imaging of group targets flying in formation

This paper proposes a novel inverse synthetic aperture radar(ISAR) imaging method based on second-order keystone transform(KT) and Sandglass transform for group targets flying in a formation with constant accelerated rectilinear motion in the same radar beam. First, range curvature and range walk of each sub-target among group targets are corrected by the second-order KT combined with the quadratic phase term compensation. After range alignment, the signals in each range frequency cell can be modelled as multiple chirp signals and then the Sandglass transform is utilized to cross-range imaging, which transforms the time–frequency distribution of the signals in each range frequency cell into beelines parallel to the slow time axis simultaneously. Finally, cross-range profiles of group targets in each range frequency cell are obtained via a projection of the perk of every scatterer in the two-dimensional accumulation plane onto the frequency axis. The advantage of the proposed method is that it can align range profiles of each sub-target simultaneously and image cross-range profiles directly without separating the returned signals, which simplifies the operation procedure. Simulation results are used to demonstrate the effectiveness of the proposed method.     

Integrated orbit and attitude hardware-in-the-loop simulations for autonomous satellite formation flying

Development and experiment of an integrated orbit and attitude hardware-in-the-loop (HIL) simulator for autonomous satellite formation flying are presented. The integrated simulator system consists of an orbit HIL simulator for orbit determination and control, and an attitude HIL simulator for attitude determination and control. The integrated simulator involves four processes (orbit determination, orbit control, attitude determination, and attitude control), which interact with each other in the same way as actual flight processes do. Orbit determination is conducted by a relative navigation algorithm using double-difference GPS measurements based on the extended Kalman filter (EKF). Orbit control is performed by a state-dependent Riccati equation (SDRE) technique that is utilized as a nonlinear controller for the formation control problem. Attitude is determined from an attitude heading reference system (AHRS) sensor, and a proportional-derivative (PD) feedback controller is used to control the attitude HIL simulator using three momentum wheel assemblies. Integrated orbit and attitude simulations are performed for a formation reconfiguration scenario. By performing the four processes adequately, the desired formation reconfiguration from a baseline of 500–1000 m was achieved with meter-level position error and millimeter-level relative position navigation. This HIL simulation demonstrates the performance of the integrated HIL simulator and the feasibility of the applied algorithms in a real-time environment. Furthermore, the integrated HIL simulator system developed in the current study can be used as a ground-based testing environment to reproduce possible actual satellite formation operations.     

基于粒子群优化的直升机飞行控制律设计方法

针对直升机强耦合特性导致飞行控制律设计难度高的问题,提出了一种基于粒子群优化算法的改进线性二次型调节器(Linear quadratic regulator,LQR)设计方法.针对直升机的线化状态空间模型,基于LQR设计方法建立了直升机飞行控制律全状态反馈矩阵的基本求解算法;以系统稳定性为约束,以最大化主状态反馈系数影...     

典型亚声速飞翼布局无人机红外隐身特性分析

隐身技术作为提高作战生存力的关键环节,是复杂对抗环境下武器装备信息化作战的最重要技术指标。飞翼布局以其独特的隐身优势,成为无人作战飞机首选布局形式。文章以超低RCS亚声速飞翼布局无人机平台为基础,从多频谱隐身特征平衡设计出发,针对其采用低发射率材料前后的红外隐身特性进行了对比分析,验证了红外隐身措施的有效性。     

Multi-agent Q-Learning control of spacecraft formation flying reconfiguration trajectories

This paper presents a novel approach based on multi-agent reinforcement learning for spacecraft formation flying reconfiguration tracking problems. In this scheme, spacecrafts learn the control strategy via transfer learning. For this matter, a new generalized discounted value function is introduced for the tracking problems. Due to the digital nature of spacecraft computer systems, local optimal controllers are developed for the spacecrafts in discrete-time. The stability of the controller is proven. Two Q-learning algorithms are proposed, in each of which the optimal control solution is learned on-line without knowledge about the system dynamics. In the first algorithm, each agent learns the optimal control independently. In the second one, each agent shares the learned information with other agents. Next, the collision avoidance capability is provided. The effectiveness of the presented schemes is verified through simulations and compared with each other.     

Robust optimal sliding mode control for the deployment of Coulomb spacecraft formation flying

Inter-spacecraft electrostatic force (Coulomb force) is desirable for close formation flying control because of its propellant-less and free contaminate characteristics attributed to the propellant exhaust emission. This paper presents robust optimal sliding mode control to deal with the problem of thruster saturation in tracking the formation trajectory for Coulomb spacecraft formation flying. The robust controller design is based on optimal control theory as a linear quadratic system, and it is augmented with an integral sliding mode control technique. The stability of the closed-loop system is guaranteed using the second Lyapunov method. The developed controller outperforms the existing ones, because it has a higher degree of fine-tuning to cope with the uncertainty. Numerical simulations are employed to confirm the efficiency of the developed controller.     

“田园一号”微推进系统设计与性能测试

针对“田园一号”微纳星编队飞行任务的技术需求，开展了微推进系统的总体设计。常规冷气推进由于其比冲低、贮存压力高、结构复杂，难以满足微纳卫星需求。选择R134a作为推进工质，通过将推进剂液化，减小系统体积。基于3D打印技术，设计贮箱、稳压罐、管路一体的推进系统。采用MEMS加工工艺，设计并研制出电加热喷口，从而提高系统比冲。分析了不同喷口尺寸、供气压力以及温度下所产生的推力和比冲大小，确定出喷口设计。表征测试所研制的电加热喷口，结果表明喷口加工误差控制在2%以内。真空条件下，采用扭摆测量系统测试推力器推进性能，测试结果表明，当稳压罐内气体压力在0.1～0.2 MPa变化时，推力大小为5～10 mN。当喷气温度从25℃升至95℃时，推进系统比冲可提升10%以上。