结构特征参数对发动机支点同心度的影响研究

航空发动机静子支点作为转子的支撑部位,由于制造工艺、装配误差和长时间工作的影响,较易出现支点不同心的现象。基于形状和位置公差理论,建立了一种发动机支点同心度的计算模型,并对某发动机的支点同心度分布进行了仿真计算。通过分析影响支点同心度的关键结构参数和测量支点同心度试验,提出了同心度的控制方法。结果表明:采用本文所述理论计算和控制方法,可准确地判断出发动机支点同心度是否符合标准,以便有针对性地选择调整措施,进而提高了发动机的装配质量,有效避免转、静子不同轴引起的碰摩问题,减小了发动机整机振动出现的几率。     

对PIO预测的A值及A准则的分析

从应用的角度详细地介绍了国外预测PIO时使用A值及A准则的情况。进行了计算公式的推导，讨论了准则在推导过程中所采用的假设及其适用情况，重新整理和校核了计算步骤和算例，以便于推广使用。     

导弹撞地概率对参数选择的影响

研究了巡航导弹的撞地概率和系统参数选择的关系问题。首先在考虑了地形随机输入和低空风随机干扰共同作用的情况下，推导了撞地概率的计算方法。其次以导弹主要参数（ａ２４和Ｋｈ）的选择为例，在给定条件下求出了它们和撞地概率的关系曲线，并分析了它们对撞地概率的影响。研究结果表明，协调选择ａ２４和Ｋｈ等参数，能有效降低撞地概率，提高巡航导弹的作战效能。     

战斗机滚转姿态快速性研究

介绍了战斗机中等幅度滚转姿态快速性的定义，应用欧拉法对19种飞机构形的滚转快速性进行了仿真计算．其结果与地面模拟战斗机攻击机动试验相比较，表明滚转姿态快速性与滚转模态时间常数、滚转操纵效能、副翼操纵速率和控制系统增益等飞行品质要求密切相关，飞行品质标准MIL—STD—1797没有完全涵盖中等幅度滚转姿态变化的要求。     

飞机带外挂对称结构振型局部化的参数影响

本文在文〔１〕研究的基础上，详细分析了飞机左右对称子结构间的耦合度以及外挂联接刚度失调量的大小等因素对振型局部化程度的影响。通过具体的数据揭示了各参数对局部化程序的影响规律。     

再入飞行器和模型转换雷诺数计算

本文采用近似的激波关系、球锥体压力分布、平衡气体状态方程、边界层厚度计算公式及转捩准则等,按照流管法计算了4种再入飞行器的外流转捩雷诺数和转捩距离,并给出了高硅氧、碳石英、碳碳球锥模型的转捩雷诺数范围,对再入飞行器和模型的计算结果作了分析和比较。     

基于深度增强学习的卫星姿态控制方法

针对卫星在执行丢弃载荷或捕获目标等复杂任务时遭遇的姿态突然发生变化的问题,采用深度增强学习方法对卫星姿态进行控制,使卫星恢复稳定状态。具体来说,首先搭建飞行器的姿态动力学环境,并将连续的控制力矩输出离散化,然后采用Deep Q Network算法进行卫星自主姿态控制训练,以姿态角速度趋于稳定作为奖励获得离散行为的最优智能输出。仿真试验表明,面向空间卫星姿态控制的深度增强学习算法能够在卫星受到突发随机扰动后稳定卫星姿态,并能有效解决传统PD控制器依赖被控对象质量参数的难题。所提出的方法采用自主学习的方式对卫星姿态进行控制,具有很强的智能性和一定的普适性,在未来卫星执行复杂空间任务中的智能控制方面有着很好的应用潜力。     

Inverse identification of constitutive parameters of Ti2AlNb intermetallic alloys based on cooperative particle swarm optimization

Ti₂AlNb intermetallic alloy is a relatively newly developed high-temperature-resistant structural material, which is expected to replace nickel-based super alloys for thermally and mechanically stressed components in aeronautic and automotive engines due to its excellent mechanical properties and high strength retention at elevated temperature. The aim of this work is to present a fast and reliable methodology of inverse identification of constitutive model parameters directly from cutting experiments. FE-machining simulations implemented with a modified Johnson-Cook (TANH) constitutive model are performed to establish the robust link between observables and constitutive parameters. A series of orthogonal cutting experiments with varied cutting parameters is carried out to allow an exact comparison to the 2D FE-simulations. A cooperative particle swarm optimization algorithm is developed and implemented into the Matlab programs to identify the enormous constitutive parameters. Results show that the simulation observables (i.e., cutting forces, chip morphologies, cutting temperature) implemented with the identified optimal material constants have high consistency with those obtained from experiments, which illustrates that the FE-machining models using the identified parameters obtained from the proposed methodology could be predicted in a close agreement to the experiments. Considering the wide range of the applied unknown parameters number, the proposed inverse methodology of identifying constitutive equations shows excellent prospect, and it can be used for other newly developed metal materials.     

Robust model predictive control for satellite formation keeping with eccentricity/inclination vector separation

This study presents model predictive formation control based on an eccentricity/inclination vector separation strategy. Alternative collision avoidance can be accomplished by using eccentricity/inclination vectors and adding a simple goal function term for optimization process. Real-time control is also achievable with model predictive controller based on convex formulation. Constraint-tightening approach is address as well improve robustness of the controller, and simulation results are presented to verify performance enhancement for the proposed approach.     

Spacecraft formation flying control around L2 sun-earth libration point using on–off SDRE approach

In this paper, on–off SDRE control approach is presented for spacecraft formation flying control around sun-earth L2 libration point. Orbits around libration points are significant targets for many space missions mainly because of efficient fuel consumption. Furthermore, less propellant usage can be achieved by considering optimal control approaches in spacecraft formation flying control design. Among various nonlinear and optimal control methods, SDRE has shown to be a popular controller in various missions due to the privileges including efficiency, accuracy and robustness. The spacecraft are assumed to have on–off thrusters as actuators. It requires them to be fed with a sequence of on–off pulses which is regarded as a challenge for spacecraft designers. Hence, the main contribution of this paper is designing an on–off SDRE approach for the formation flight around sun-earth L2 point with uncertainty with energy and accuracy considerations. Including on–off input as a constraint is not feasible for SDRE implementation because it makes the system non-affine. An alternative is utilizing an integral action technique and an auxiliary control to make the system affine which leads to on–off SDRE approach. It has also been shown that the proposed method is robust against parametric uncertainties of the states. Present study aims to design an energy-beneficial, simple and attractive controller for a complex nonlinear system with on–off inputs and uncertainty in CRTBP. Simulation results show that the on–off SDRE control could provide the formation flight around L2 point with high accuracy using less energy consumption.