敏捷型卫星的相机外热流变化及其抑制措施效果分析

文章根据空间外热流理论建立了敏捷型遥感卫星的空间相机外热流计算模型,针对相机的外热流变化情况,选择典型计算工况并对其外热流特性进行了仿真分析,得出了工作模式及卫星姿态变化对相机主要部件热流的影响。为解决外热流分布不均和波动剧烈问题,提出了加长相机遮光罩和加装热防护门2种抑制方案,并对方案的效果进行了分析评价。     

飞行器高热流密度长时间测试方法

为实现对飞行器高热流密度热流的长时间测量,文章提出了一种以与高导热金属蜂窝材料复合的相变材料作为热沉的热流计,利用相变材料的潜热持续吸收热流计所接收的热量,可以对1 MW·m-2的热流密度持续测量2000 s以上。利用显热容数值方法建立了高热流密度长时间持续测量的分析模型,研究了热沉相变材料的热导率、相变温度、相变潜热等物性参数对测量方案的影响。研究结果表明,应选取热导率较大、相变温度较低且高于初始环境温度,以及相变潜热较大的相变材料作为长时间高热流密度测量的热沉材料。     

舱外航天服热试验外热流模拟方法研究

出舱行走所必需的舱外航天服具有复杂外表面形状,其空间外热流极其复杂。文章对舱外航天服在热试验中所采用的外热流模拟方法进行了对比分析研究,结合航天服的特点对热试验中外热流模拟的方式进行了探讨, 论证了用接触式电加热片及红外加热笼两种外热流施加方式的可行性,并通过分析的手段对不同热试验方法中施加的热流和太空中的热流大小及分布进行了对比。     

场协同原理在高超声速化学非平衡流动中的推广

应用理论分析与数值模拟方法,将对流传热的场协同原理从不可压缩流动推广至高超声速化学非平衡流动中。结果表明,高超声速化学非平衡层流与湍流的热流密度取决于流动的当地单位体积的动量与单位质量总焓梯度的协同。用当地单位体积的动量与单位质量总焓梯度的协同研究高超声速化学非平衡流动的壁面传热问题,对层流流动下的对流传热,不但计及了高超声速化学非平衡流的密度变化对热流密度的影响,而且包括了静焓梯度、压力梯度、边界层内的分子黏性剪切效应对热流密度的作用;对湍流问题,除了上述层流流动各项对热流密度的影响外,还计及了雷诺剪切应力对热流密度的作用。考虑到高超声速化学非平衡流静焓的定义,高超声速化学非平衡层流及湍流的场协同同时计及所有组分的平动能、转动能、振动能及电子能等梯度的贡献。     

利用红外加热笼进行低热流模拟的设计方法研究

在航天器热平衡试验中,散热面区域的低热流密度要求往往难以实现。在以往的试验中,考虑到加热笼覆盖系数对热流密度均匀性的影响,通常选用红外灯阵作为主要的外热流模拟装置。但是红外灯阵体积和热容较大,形状适应性不强,对试验容器空间要求较高。文章利用仿真的手段研究了加热笼的覆盖系数对热流密度均匀性的影响,探讨了利用红外加热笼进行低热流模拟的可行性。     

CONTROL OF TWO DIMENSIONAL JETS USING MINIATURE ZERO MASS FLUX JETS

Zero mass flux jets, synthesized by acoustic actuators, have been used for the purpose of jet mixing enhancement and jet vectoring. Zero mass flux jets composed of entirely entrained fluid allow momentum transfer into the embedding flow. In the present experiments, miniature-scale high aspect ratio actuator jets are placed along the long sides and near the exit plane of a primary two-dimensional jet. In different modes, the primary jet can be vectored either towards or away from the actuator jets and the jet mixing is enhanced. The disturbance of the excitation frequency is developed while the unstable frequency of the primary jet is completely suppressed.     

考虑轨道摄动的外热流计算分析

为改进传统外热流算法未考虑外热流经多次反射后的吸收和国外商业软件未考虑轨道摄动及太阳矢量变化对外热流的影响等不足,重新定义了外热流角系数和外热流辐射传递因子,综合SGP4轨道模型和Gebhart方法,给出了考虑摄动等因素的辐射传递因子和轨道外热流计算模型,以及相应的计算流程。通过仿真分析论证了考虑多次反射及摄动等因素的重要性。     

Solar activity dependence of total electron content derived from GPS observations over Mbarara

Vertical total electron content (VTEC) observed at Mbarara (geographic co-ordinates: 0.60°S, 30.74°E; geomagnetic coordinates: 10.22°S, 102.36°E), Uganda, for the period 2001–2009 have been used to study the diurnal, seasonal and solar activity variations. The daily values of the 10.7 cm radio flux (F_10.7) and sunspot number (R) were used to represent Solar Extreme Ultraviolet Variability (EUV). VTEC is generally higher during high solar activity period for all the seasons and increases from 0600 h LT and reaches its maximum value within 1400 h–1500 h LT. All analysed linear and quadratic fits demonstrate positive VTEC-F_10.7 and positive VTEC-R correlation, with all fits at 0000 h and 1400 h LT being significant with a confidence level of 95% when both linear and quadratic models are used. All the fits at 0600 h LT are insignificant with a confidence level of 95%. Generally, over Mbarara, quadratic fit shows that VTEC saturates during all seasons for F_10.7 more than 200 units and R more than 150 units. The result of this study can be used to improve the International Reference Ionosphere (IRI) prediction of TEC around the equatorial region of the African sector.     

时域有限体积法的格式稳定性分析

以模型方程为例,采用MUSCL插值的S-W通量分裂格式,分别结合二步、四步龙格一库塔时间推进格式建立数值求解方法.用Von Neumann傅里叶级数分析方法,通过对不同格式的放大因子及色散因子的计算,分析了时域有限体积法(FVTD)格式的稳定性.     

Modeling and analysis of mover gaps in tubular moving-magnet linear oscillating motors

A tubular moving-magnet linear oscillating motor (TMMLOM) has merits of high efficiency and excellent dynamic capability. To enhance the thrust performance, quasi-Halbach permanent magnet (PM) arrays are arranged on its mover in the application of a linear electro-hydrostatic actuator in more electric aircraft. The arrays are assembled by several individual segments, which lead to gaps between them inevitably. To investigate the effects of the gaps on the radial magnetic flux density and the machine thrust in this paper, an analytical model is built considering both axial and radial gaps. The model is validated by finite element simulations and experimental results. Distributions of the magnetic flux are described in condition of different sizes of radial and axial gaps. Besides, the output force is also discussed in normal and end windings. Finally, the model has demonstrated that both kinds of gaps have a negative effect on the thrust, and the linear motor is more sensitive to radial ones.