直升机桨叶连续后缘襟翼设计与气动影响分析

在直升机旋翼减振应用中,连续后缘襟翼和常规分离式襟翼相比具有重量轻、结构紧凑、气流平稳等优点。选用压电纤维复合材料作为驱动材料,基于NACA23012翼型设计带有连续变形后缘襟翼的桨叶段,对襟翼及其驱动结构进行选材设计分析;采用流固耦合方法分析连续后缘襟翼对剖面翼型气动特性的影响。结果表明:连续后缘襟翼在直升机桨叶工作迎角、马赫数范围内可实现有效偏转,显著改变翼剖面气动升力和力矩,证明了连续后缘襟翼在旋翼减振控制中的潜在应用价值。     

Design and application of an Electric Tail Rotor Drive Control (ETRDC) for helicopters with performance tests

With the development of electric helicopters’ motor technology and the widespread use of electric drive rotors, more aircraft use electric rotors to provide thrust and directional control. For a helicopter tail rotor, the wake of the main rotor influences the tail rotor’s inflow and wake. In the procedure of controlling, crosswind will also cause changes to the tail disk load. This paper describes requirements and design principles of an electric motor drive and variable pitch tail rotor system. A particular spoke-type architecture of the motor is designed, and the performance of blades is analyzed by the CFD method. The demand for simplicity of moving parts and strict constraints on the weight of a helicopter makes the design of electrical and mechanical components challenging. Different solutions have been investigated to propose an effective alternative to the mechanical actuation system. A test platform is constructed which can collect the dynamic response of the thrust control. The enhancement of the response speed due to an individual motor speed control and variable-pitch system is validated.     

基于UG、Workbench平台航空发动机多盘转子结构自动优化方法

目前对航空发动机转子优化设计多限于单盘优化,且优化需要借助人工调整再优化。基于航空发动机转子优化设计常用软件平台数据交流方便和减少人工调整的考虑,提出了基于UG、Workbench平台航空发动机多盘转子结构自动优化方法。首先基于UG平台,对多盘转子结构进行参数化几何造型,借助生成的标准化模板,便于减少建模工作量及对同类盘的优化。然后基于Workbench平台,借助脚本语言（APDL、Python）二次开发完成对多盘转子结构状态变量提取,及自动优化流程控制。算例结果表明,在满足几何、强度要求条件下,优化后多盘转子结构质量减少了33%,应力分布更为均匀,且验证该方法具有良好的稳定性及精度。      

当量油气比对内燃波转子燃烧特性的影响

为了研究当量油气比对内燃波转子燃烧特性的影响规律,采用控制变量法,保持内燃波转子转速、混气填充速度不变,通过调节燃料喷射体积流量改变混气的当量油气比。在不同的当量油气比下开展内燃波转子燃烧特性试验。试验结果表明:当量油气比对于内燃波转子燃烧过程影响很大,随着当量油气比的增加,内燃波转子获得的燃烧压力增益增大,在内燃波转子转速为900r/min、混气填充速度为6.741m/s、当量油气比为1.442时,6个工作循环内平均燃烧压力增益达到246.29％,火焰平均传播速度随当量油气比呈类似正态分布,在化学恰当比附近达到最大10.8m/s。当量油气比小于1时,两组工况下火焰锋面呈向下倾斜状传播,当量油气比大于1时,两组工况下火焰锋面呈向上倾斜状传播。      

转子叶栅非同步振荡发声特性研究

轴流压气机转子叶片排振荡疲劳失效是常见的气动弹性失稳问题。当转子叶栅处于非同步振荡状态下时,压气机管道内部将伴随着异常噪声的产生,这类噪声的频率既不是分布在叶片通过频率及其谐波上,也不是分布在转子轴频率及其谐波上,同时也不满足简单多普勒效应。为了解释这种异常噪声现象,以三维升力面理论为基础,讨论叶片对其附近流体施加非定常载荷的发声问题,给出了转子叶栅振荡异常发声问题的物理解释,建立了声场频率及模态特性与转子声源特性的直接关系式,并给出了频率特性不同于叶片通过频率且不符合简单多普勒效应的完整解释。在此基础上,通过机理性实验研究证实了该模型的正确性。实验结果表明,理论预测声场的频率和周向模态特性与实验结果完全一致。     

机翼后缘柔性支撑结构的拓扑优化

针对机翼后缘柔性支撑结构的多目标拓扑优化问题,分析了柔性支撑结构的优化目标及目标函数,并采用位矩阵表示机翼后缘柔性支撑结构,利用非支配排序遗传算法(NSGA-Ⅱ)对该优化问题进行了求解。在优化过程中,引入连通性分析和相似个体过滤,借助ANSYS对可行个体进行有限元分析(FEA),获得了结构质量、变形性能和承载能力等目标值。通过MATLAB对违约个体进行惩罚,实现了位矩阵表示的NSGA-Ⅱ,得到了一组互不支配的机翼后缘柔性支撑优化结构,可根据实际需求选择这些相应的拓扑结构。结果表明,本方法可为机翼后缘柔性支撑结构的拓扑优化提供可行、有效的解。     

磁悬浮飞轮用新型异极性永磁偏置径向磁轴承

为满足应用于航天器姿控、储能的磁悬浮飞轮采用的扁平构型或高转速转子需求,提出了一种新型异极性永磁偏置径向磁轴承,具有轴向长度短、结构紧凑的优点,有利于扁平转子或高速转子的磁悬浮控制。在新型径向磁轴承磁路分析的基础上,通过应用于50 Nms反作用飞轮的设计实例,经仿真分析,校验了新型径向磁轴承的基本性能;并与传统同极性永磁偏置径向磁轴承进行了比较,验证了新型径向磁轴承的优点。     

Effects of uncertainties and flexible dynamic contributions on the control of a spacecraft full-coupled model

One of the most important problems for performing a good design of the spacecraft attitude control law is connected to its robustness when some uncertainty parameters are present on the inertial and/or on the elastic characteristics of a satellite. These uncertainties are generally intrinsic on the modeling of complex structures and in the case of large flexible structures they can be also attributed to secondary effects associated to the elasticity. One of the most interesting issues in modeling large flexible space structures is associated to the evaluation of the inertia tensor which in general depends not only on the geometric ‘fixed’ characteristic of the satellite but also on its elastic displacements which of course in turn modify the ‘shape’ of the satellite. Usually these terms can be considered of a second order of magnitude if compared with the ones associated to the rigid part of a structure. However the increasing demand on the dimension of satellites due to the presence for instance of very large solar arrays (necessary to generate power) and/or large antennas has the necessity to investigate their effects on their global dynamic behavior in more details as a consequence. In the present paper a methodology based on classical Lagrangian approach coupled with a standard Finite Element tool has been used to derive the full dynamic equations of an orbiting flexible satellite under the actions of gravity, gravity gradient forces and attitude control. A particular attention has been paid to the study of the effects of flexibility on the inertial terms of the spacecraft which, as well known, influence its attitude dynamic behavior. Furthermore the effects of the attitude control authority and its robustness to the uncertainties on inertial and elastic parameters has been investigated and discussed.     

压电自适应桁架结构主动控制模型及实验

为提高结构对外部环境的抗干扰能力,构造了压电柔性自适应桁架结构,并对其主动控制进行了研究.由传感器、作动器与柔性梁组成压电自适应桁架结构.基于自适应结构的机电耦合理论,在测量位移的情况下,采用改进的二次积分力反馈控制方法研究了空间压电柔性自适应桁架结构的振动主动控制问题.建立了压电柔性自适应桁架结构主动控制实验系统,并对这类自适应结构进行了实时计算机振动主动控制实验研究.实验研究表明柔性自适应桁架结构能够改善结构的动力学特性,对外界的干扰具有良好的自适应性.     

悬停状态下小型共轴直升机操纵响应特性分析

从在研共轴双旋翼直升机的工程实际出发,建立了悬停状态下旋翼非定常气动特性的计算模型.引入Leishman-Beddoes指数函数的半经验公式,建立了二维翼型非定常气动模型;引入干扰因子到动态入流模型,建立了反映共轴双旋翼直升机上下旋翼气动干扰的诱导速度模型;从桨叶的挥舞动力学模型出发,利用四阶Runge-Kutta算法求解桨叶刚性挥舞角的数值解.通过计算分析,得到了悬停状态,总距突增时上下旋翼升力和扭矩的动态响应特性,并分析比较了半差动和全差动航向控制方式的操纵响应差别,为共轴式直升机机动特性的研究作了必要的准备.