变结构控制在基于脉冲比例阀的燃油调节系统中的应用

针对航空发动机燃油控制系统中二阶非定常执行机构通常出现设计困难的问题,介绍一种变结构控制方法,将二阶非定常执行机构变成确定的一阶惯性环节,该方法既充分利用其优点"不变性"又可以规避其突出缺点"抖振",特别适用于驱动脉冲比例调节阀;同时提出脉冲比例阀的变结构调节中遇到的实际问题(例如微分的精度问题)的解决办法,以及影响该方法可行性的若干必要条件。结果表明:符合条件时变结构控制在基于脉冲比例阀的燃油调节系统中是可行的。     

一种民用飞机电作动舱门集中式控制方案研究

在未来飞机多/全电化和机电综合管理的发展趋势下,舱门作动器逐渐由机电作动取代了传统的液压、机械作动。针对目前民用飞机舱门分散式独立控制杂、乱、散的局面,提出一种用于电作动舱门的集中式控制方案。对该集中式控制方案下如何实现电机的伺服控制、舱门的并行控制以及接近传感器感应距离值的修改进行设计,并搭建舱门作动系统模拟装置及电...     

液压余度舵机同步传动研究

几个舵机驱动同一控制对象,通道间产生力的纷争,本文采用均衡网络来减轻力的纷争,而均衡网络的参数则根据解耦控制理论导出。实际系统的实验证明本文所提出的消除余度通道间力纷争保证同步传动的方案是有效的。文章给出了最优均衡网络的参数设计公式。     

A novel architecture of electro-hydrostatic actuator with digital distribution

To address the flow imbalance rapidly of the asymmetric Electro-Hydrostatic Actuator (EHA), this paper presents a novel architecture of asymmetric EHA with the Digital Distribution (EHA-DD). It also improves the flow nonlinearity and control accuracy of the pump, especially in the low-speed condition. The digital distribution with two High-Speed on–off Valves (HSVs) not only balances flow instead of the check valves, but also replaces the pump at the low-speed to control output flow by adjusting the PWM signal. The pump and HSVs are the crucial components to control flow output. Firstly, the flow calculation models of the pump and the duty ratio inversed model of the HSV are obtained through experimental tests and the identification method. To get the control input signal for the required flow, the pump speed and PWM duty ratio for the HSVs are inversed to compensate for flow output. Further, a multimode digital flow distribution control method based on pump speed, mainly including the pump-controlled mode for large flow demand and valve-controlled mode for little flow demand, is proposed to control the accurate flow output actively. The step extension experiments based on the flow calculation models are conducted on the EHA-DD prototype under elastic, opposite varying load. The results demonstrate that the EHA-DD realizes little position error by accurate flow control, and it is also beneficial to improve the service life of the pump.     

西安某粘接材料厂室内供暖、热水系统的设计

基于厂方对供热系统的要求,根据供热建筑物、机房和可利用设施的实际情况,采用一台换热器,通过阀门的切换,实现了供暖和供热水的分段运行。将蒸汽发生器的进水与系统补水有机地整合为一个系统,有效地解决了机房面积过小的实际困难。利用自来水的压力和热水箱与浴室的高差解决了热水供应的实际问题。     

SAR performance-based fault diagnosis for electro-hydraulic control system: A novel FDI framework for closed-loop system

Model-based fault diagnosis serves as an efficient and powerful technique in addressing fault detection and isolation (FDI) issues for control systems. However, the standard methods and their modifications still encounter some difficulties in algorithm design and application for complex higher-order systems. To avoid these difficulties, a novel fault diagnosis framework based on multiple performance indicators of closed-loop control system is proposed. Under this framework, a so-called performance residual vector is constructed to measure the differences between the real system and the nominal model in terms of system stability, accuracy, and rapidity (SAR) respectively. The criteria for quantification, normalization of the SAR residuals and the explicit mappings between the thresholds and the required performance are given. FDI can be easily achieved simultaneously by monitoring the normalized residual vector length and direction in the SAR performance residual space. A case study on electro-hydraulic servo control system of turbofan engine is adopted to demonstrate the effectiveness of the proposed method.     

尺度效应下大功率伺服电机再生冷却通道超临界态甲烷传热特性研究

针对飞行器电动执行机构的大功率伺服电机强化散热问题,建立了不同尺度的电机缠绕式螺旋管再生冷却通道数值模型,对超临界态甲烷在尺度效应影响下的传热特性和机理进行研究,探讨了不同尺度冷却通道中超临界态甲烷所受重力浮升力和离心浮升力对传热性能的影响.结果表明,离心浮升力及重力浮升力均受到超临界态甲烷热物性剧烈变化的影响;在相同...     

扩展近似时间最优伺服控制及其试验验证

针对带有惯性阻尼环节的典型伺服系统,提出一种能实现大范围快速定点运动的控制方案。控制方案首先利用时间最优控制律进行快速目标追踪,当系统速度下降到一定范围内时平滑切换成线性控制律。采用线性控制区内的闭环极点阻尼系统和自然频率作为设计参数,给出了全参数化的控制律。基于Lyapunov理论分析了控制系统的闭环稳定性。将该控制方案用于一个直流伺服电机的位置-速度环的定点位置控制,并进行了MATLAB数字仿真和基于TMS320F28335 DSC的试验研究。结果表明:所设计的控制系统可以对大范围的给定目标进行快速和准确的跟踪,且对扰动和系统参数差异具有较好的鲁棒性。     

交流伺服系统特性分析与测试

分析了交流伺服系统的基本原理和电气性能特点。介绍了交流伺服系统主要性能评价指标和测试方法。据此,根据GB/T 16439—2009《交流伺服系统通用技术条件》中交流伺服系统试验测试的要求和特点,设计和搭建了用于交流伺服系统测试用的平台,并且介绍了在该平台实现交流伺服系统性能试验的方法。测试系统的设计实现为类似试验站的研制提供了重要参考。     

抗扰动复合非线性伺服控制器的设计与应用

针对典型的电机伺服系统,提出了一种鲁棒复合非线性伺服控制器的离散域设计方案。把系统的扰动和不确定性归结为一个斜坡信号(其变化率恒定),设计一个降维线性扩展状态观测器,对系统未测量状态和未知扰动加以估计。把设计的控制律应用于永磁同步伺服电机,先在MATLAB上进行仿真分析,随后基于TMS320F28335DSC进行试验测试。结果表明系统在各种类型扰动作用下,对目标位置都能实现快速、平稳和准确的跟踪,具有较好的鲁棒性。