飞机着陆过程中提高气动性能的一种新方法

为了提高飞机在着陆过程中的气动性能,提出了一种新方法:将翼型上翼面的一段表面设计为活动部分。当飞机进入着陆阶段的较大迎角时,通过活动部分在上翼面形成一个台阶产生稳定的驻涡,再联合Gurney襟翼,达到同时提高翼型的升力、失速迎角及增加翼型阻力的目的。在NACA2415翼型上对上述方法进行了验证。结果表明,翼型最大升力系数从原始翼型的1.548 232提高到2.160 687,最大升力系数所对应的迎角可以从原始翼型的17°提高到20°。可见,所提出的新方法对提高飞机的着陆性能是有效的。     

飞机封闭腔室减重降噪优化方法

噪声水平是现代飞机封闭腔室设计的重要指标,设计中单纯地对壁板进行加肋处理虽能显著降低噪声但会大大增加结构质量,为此对由封闭腔室构成的结构-声耦合系统进行了减重降噪优化研究。基于结构-声耦合有限元模型,利用有限元软件ACTRAN计算了频谱加载时舱内的声压响应。通过试验对简化处理及数值计算进行了验证,并修正了相关模型参数。为了降低结构质量,以加强肋为边界对舱门壁板进行了分区,通过对各个区域壁板厚度及肋条截面积的优化设计,使系统动刚度分配更趋合理,降低了声辐射能量以及结构-声腔的耦合性,从而实现了在满足噪声约束条件下减轻结构质量的目标。本文的工作对实际工程中由加肋壁板所构成的类似结构的减重降噪设计有着较好的工程指导价值。     

Fault self-repair strategy based on evolvable hardware and reparation balance technology

In the face of harsh natural environment applications such as earth-orbiting and deep space satellites, underwater sea vehicles, strong electromagnetic interference and temperature stress,the circuits faults appear easily. Circuit faults will inevitably lead to serious losses of availability or impeded mission success without self-repair over the mission duration. Traditional fault-repair methods based on redundant fault-tolerant technique are straightforward to implement, yet their area, power and weight cost can be excessive. Moreover they utilize all plug-in or component level circuits to realize redundant backup, such that their applicability is limited. Hence, a novel selfrepair technology based on evolvable hardware（EHW） and reparation balance technology（RBT） is proposed. Its cost is low, and fault self-repair of various circuits and devices can be realized through dynamic configuration. Making full use of the fault signals, correcting circuit can be found through EHW technique to realize the balance and compensation of the fault output-signals. In this paper, the self-repair model was analyzed which based on EHW and RBT technique, the specific self-repair strategy was studied, the corresponding self-repair circuit fault system was designed, and the typical faults were simulated and analyzed which combined with the actual electronic devices. Simulation results demonstrated that the proposed fault self-repair strategy was feasible. Compared to traditional techniques, fault self-repair based on EHW consumes fewer hardware resources, and the scope of fault self-repair was expanded significantly.     

海洋定位卫星性能分析

编队卫星是重要的空间设施,为保证编队卫星在空间复杂环境中的工作效率,需对编队卫星的工作原理、状态进行分析。以三星编队的海洋定位卫星为例,由于该编队卫星工作状态常受到星间基线、目标源位置、卫星高度等多种因素的制约,易造成定位模糊等问题。在评价海洋定位卫星性能方面,传统的方法主要着眼于定位精度,而忽略了定位迭代解算时间这一指标,而在特定的场景下(海上搜救、抢险救灾),较短的解算时间可以迅速找出目标源的概略位置。通过分析海洋定位卫星的时差测量定位原理,对定位误差精度进行了分析,提出水平精度因子(HDOP)和最小二乘迭代结合的评价方法,分析了影响卫星性能的因素,包括目标源相对几何位置、卫星高度及卫星几何构型等方面的影响。仿真结果表明:本文的设计可以提高卫星的定位效果,为定位卫星的参数设定提供参考。     

A review of topology optimization for additive manufacturing: Status and challenges

Topology optimization was developed as an advanced structural design methodology to generate innovative lightweight and high-performance configurations that are difficult to obtain with conventional ideas. Additive manufacturing is an advanced manufacturing technique building as-designed structures via layer-by-layer joining material, providing an alternative pattern for complex components. The integration of topology optimization and additive manufacturing can make the most of their advantages and potentials, and has wide application prospects in modern manufacturing. This article reviews the main content and applications of the research on the integration of topology optimization and additive manufacturing in recent years, including multi-scale or hierarchical structural optimization design and topology optimization considering additive manufacturing constraints. Meanwhile, some challenges of structural design approaches for additive manufacturing are discussed, such as the performance characterization and scale effects of additively manufactured lattice structures, the anisotropy and fatigue performance of additively manufactured material, and additively manufactured functionally graded material issues, etc. It is shown that in the research of topology optimization for additive manufacturing, the integration of material, structure, process and performance is important to pursue high-performance, multi-functional and lightweight production. This article provides a reference for further related research and aerospace applications.     

Hypersonic reentry trajectory planning by using hybrid fractional-order particle swarm optimization and gravitational search algorithm

This paper proposes a novel hybrid algorithm called Fractional-order Particle Swarm optimization Gravitational Search Algorithm (FPSOGSA) and applies it to the trajectory planning of the hypersonic lifting reentry flight vehicles. The proposed method is used to calculate the control profiles to achieve the two objectives, namely a smoother trajectory and enforcement of the path constraints with terminal accuracy. The smoothness of the trajectory is achieved by scheduling the bank angle with the aid of a modified scheme known as a Quasi-Equilibrium Glide (QEG) scheme. The aerodynamic load factor and the dynamic pressure path constraints are enforced by further planning of the bank angle with the help of a constraint enforcement scheme. The maximum heating rate path constraint is enforced through the angle of attack parameterization. The Common Aero Vehicle (CAV) flight vehicle is used for the simulation purpose to test and compare the proposed method with that of the standard Particle Swarm Optimization (PSO) method and the standard Gravitational Search Algorithm (GSA). The simulation results confirm the efficiency of the proposed FPSOGSA method over the standard PSO and the GSA methods by showing its better convergence and computation efficiency.     

一种高升力系统卡位信号的算法设计

提出了一种高升力系统卡位信号的算法。用于将襟/缝翼控制手柄上的传感器信号转换成高升力系统计算机的命令卡位信号。本算法相较于传统的算法有两处改进,第一处是在手柄卡位信号的计算中增加了信号有效性的确认环节,可以避免当手柄短暂通过手柄卡位信号无效的区域时,产生无效的卡位信号,继而对后续的命令卡位信号计算造成影响。第二处是在命令卡位信号的计算中加入将两个计算机设为主-备关系,并进行表决计算的算法环节,避免了传统算法中由于信号传输延时导致不同通道间输出的命令卡位不一致,从而导致襟/缝翼半速运动的现象发生。本算法可以使最终输出的四个通道的命令卡位信号正确且一致,并已通过实验验证其鲁棒性较强,对民用飞机高升力系统设计有一定的指导作用。     

大型客机后缘铰链襟翼巡航变弯度气动性能数值研究

更高、更快、减阻是飞机设计三大永恒的追求。传统的固定翼飞机在进行优化设计时需兼顾各种飞行条件,寻求一个折中的最优解,而变弯度机翼的概念能有效解决这个问题,符合上述飞机设计的三大追求。着重研究大型宽体客机后缘襟翼刚性变弯度对巡航气动效率及跨声速抖振边界的影响。首先基于下垂式铰链襟翼机构,编制了机构引导下带扰流板联合偏转的后缘襟翼运动仿真程序,以自动生成不同襟翼偏角的巡航构型。在此基础上对巡航构型进行非稳态气动计算,获得跨声速区机翼抖振边界。以该抖振边界作为约束条件,以襟翼偏角、迎角为双变量,获得Cl-K关系图,得到最优升阻比曲线。本文中襟翼偏角变化为0°~±3°,间隔1°;迎角范围为-2°~5°,间隔1°。计算结果表明,变弯度构型较不变弯度构型升阻比有所提高,抖振边界约提高10%;变弯度构型可提高不同设计点的气动效率,实现减阻省油;跨声速区机翼抖振边界的提高扩大了飞行包线,使得飞机能飞得更高、更快。     

基于Optistruct的结构静动力拓扑优化设计

基于Optistruct平台,研究了二维平面薄板及三维结构的静力、动力以及静动力联合的拓扑优化,给出了典型结构的算例,对比了优化参数取值不同时所对应的优化结果,探讨了优化过程中的网格依赖性以及拓扑优化的效率等问题.     

多变量全局寻优与智能优化在星座组网中的应用

顶层任务规划通常与星座组网紧密结合,小卫星分散灵活的特性尤其适用于星群规模化在轨运行。针对热点区域覆盖和全球覆盖的不同任务需求,提出了对构型多变量进行全局寻优和利用智能优化技术进行星座构型优化的方法,两种优化方法可分别获得小规模星群最优效能与超大型星群的较优效能。优化方法不受轨道类型和任务目标分布的约束,具有良好的鲁棒性。