Assessment study of ionosphere correction model using single- and multi-shell algorithms approach over sub-Saharan African region

It is a known fact that ionosphere is the largest and the least predictable among the sources of error limiting the reliability and accuracy of Global Navigation Satellite Systems (GNSS) and its regional augmentation systems like Satellite Based Augmentation System (SBAS) in a safety-of-life application. The situation becomes worse in the Equatorial Ionization Anomaly (EIA) region, where the daytime ionization distribution is modified by the fountain effect that develops a crest of electron density at around ±15° to ±20° of the magnetic equator and a trough at the magnetic equator during the local noon hours. Related to this phenomenon is the appearance of ionosphere irregularities and plasma bubbles after local sunset. These may degrade further the quality of service obtained from the GNSS/SBAS system of the said periods. Considering the present operational augmentation systems, the accuracy and integrity of the ionosphere corrections estimate decreases as the level of disturbances increases. In order to provide a correct ionosphere correction to the user of GNSS operating in African EIA region and meet the integrity requirements, a certified ionosphere correction model that accurately characterizes EIA gradient with the full capacity to over-bound the residual error will be needed. An irregularities detector and a decorrelation adaptor are essential in an algorithm usable for African sub-Saharan SBAS operation. The algorithm should be able to cater to the equatorial plasma vertical drifts, diurnal and seasonal variability of the ionosphere electron density and also should take into account the large spatial and temporal gradients in the region. This study presents the assessment of the ionosphere threat model with single and multi-layer algorithm, using modified planar fit and Kriging approaches.     

Kalman弹道滤波器的快速收敛性研究

在弹道修正过程中,需根据一段实测弹道参数,准确地估算常规弹箭的飞行弹道。工程中,常应用Kalman滤波方法,结合质点弹道模型建立六状态滤波弹道模型。速度初值估计的准确性,是对滤波过程造成影响的主要因素。为改善这一状况,采用多项式拟合用以对速度状态进行估计并以此作为滤波初始值。在此种估计下滤波,速度滤波过程可快速收敛,位置滤波过程收敛速度大幅度提高,可使最优弹道诸元参数获取时间缩短30%。     

考虑磨损后含间隙指向机构运动特性

为了提高空间指向机构磨损寿命的预测精度,克服传统静态磨损寿命预测的缺陷,计及间隙、摩擦磨损耦合因素,以实现机构关节动态磨损的精确预测,并对综合考虑间隙、摩擦磨损等因素的空间二维指向机构动力学问题和磨损问题进行了研究。采用牛顿 欧拉法,将间隙变量嵌入动力学模型,构建含间隙二维指向机构的动力学模型。基于Archards磨损模型,找到运动副接触面不同位置处的磨损深度,重构运动副表面形貌,并对磨损前后含间隙指向机构的动态特性进行分析,得到了关节处接触碰撞力和切向摩擦力的变化规律;采用动态拟合变量法和离散处理法分别对含间隙运动副内部间隙与接触力间、运行时间与相对滑移速度间的对应关系进行拟合,并建立了动态磨损数学模型;进一步预测了二维指向机构在跟踪模式、调姿模式下的运行时间分别为1259192h、76444h。研究工作为二维指向机构的本体设计、制造与应用奠定基础。     

叶顶间隙对人工心脏泵血液相容性影响的数值研究

采用定常和非定常数值方法系统研究了离心血泵在供压173 mmHg时,4组不同叶顶间隙下的血流动力学特性和血液相容性。所研究的间隙分别为5.0、2.0、1.0 mm和0.2 mm,对速度、湍动能等参数的分布规律以及标准溶血指数(normalized index of hemolysis,NIH)随叶顶间隙大小的变化规律进行了研究。结果表明:在流量3.0 L/min,供压173 mmHg工况下,原型血泵有较好的血液相容性;随着叶顶间隙的减小,最大切应力与标准溶血指数呈显著单峰变化趋势,在1.0 mm间隙结构取得最低标准溶血指数0.000 5 g/100 L,并降低了在叶轮侧壁与泵壳下壁面的狭缝内形成血栓的风险;定常与非定常的结果对比表明:定常结果往往会过小的预测溶血,瞬态标准溶血指数随叶轮转动呈周期性变化,其平均值与定常结果相差在5%以内。      

A tip clearance prediction model for multistage rotors and stators in aero-engines

Tip clearances of multistage rotors and stators greatly affect aero-engines’ aerodynamic efficiency, stability and safety. The inevitable machining and assembly errors, as well as the complicated error propagation mechanism, cause overproof or non-uniform tip clearances. However, it is generally accepted that tip clearances are difficult to predict, even under assembly state. In this paper, a tip clearance prediction model is proposed based on measured error data. Some 3D error propagation sub-models, regarding rotors, supports and casings, are built and combined. The complex error coupling relationship is uncovered using mathematical methods. Rotor and stator tip clearances are predicted and analyzed in different phase angles. The maximum, minimum and average tip clearances can be calculated. The proposed model is implemented by a computer program, and a case study illustrates its performance and verifies its feasibility. The results can be referred by engineers in assembly quality judgement and decision-making.     

大直径高干涉螺栓安装应用研究

针对某型机研制中大直径、高干涉螺栓在厚夹层结构中的安装问题,对不同安装方法进行了分析研究,提出采用应力波安装新方法。采用应力波对直径8mm、10mm、12mm的干涉螺栓进行了安装,分析了安装质量。研究结果表明采用应力波安装方法可以满足高干涉螺栓的安装技术要求。     

考虑轴承游隙的非线性动力学轴承-转子系统优化

针对一类带动态性能约束的轴承-转子系统优化设计存在的问题,做如下改进工作:一是在目前一类轴承-转子系统优化模型基础上,将轴承游隙作为设计变量,考虑轴承游隙的影响;二是提出了一种演化算法/线性搜索的混合算法,将优化过程分为两个阶段,首先采用演化算法对问题全局寻优,求得给定代数时的优化解,再以此解作为新的初始解,采用线性搜索方法进行局部搜索.经数值仿真表明:该优化模型中增加考虑轴承游隙后,对优化结果有较大影响;提出的混合算法克服了使用线性搜索方法难以确定初始解的问题,在同等计算精度和耗时情况下,该方法求解成功率较高.      

涡轮叶冠间隙流动特性实验

针对叶冠腔内有冷却气流的转子叶片叶冠,通过改变主流雷诺数、前后孔岀流比、叶尖间隙等参数得到静止状态下叶冠间隙流动的总压损失系数.实验结果表明:增大主流雷诺数与前孔岀流比,叶冠总压损失系数增大;减小叶尖间隙,总压损失系数也增大,小叶尖间隙下,总压损失系数随主流雷诺数与前孔岀流比增长更快,而后孔岀流比对叶冠总压损失系数影响不大.      

毫米级平面叶栅的PSP测量

建立了一种新型的非接触式压敏涂料（Pressure Sensitive Paint,PSP）测压系统,设计了一套可拆卸式毫米级平面叶栅实验段,首次应用PSP测压技术测量了有／无叶尖间隙毫米级叶栅叶背表面静压分布。结果表明：由于存在叶尖间隙,叶盆处高压气体通过间隙泄漏流入叶背,使叶背叶尖处压力明显大于叶根处;与无叶尖间隙相比,有间隙时泄漏对叶背表面压力的影响约占叶高1／3,叶背底端受泄漏的影响较小。     

叶尖间隙分布对内燃机增压压气机性能影响

采用三维CFD(计算流体动力学)方法,对两种相反叶尖间隙分布方式的无叶扩压器压气机级进行了详细流场分析,研究了叶尖间隙分布对跨声速离心压气机叶轮及扩压器性能的影响机理.结果表明,非均匀分布弦向间隙分布叶轮有较宽的稳定工作范围;出口轴向间隙小于进口径向间隙的压气机级压比和效率明显高于出口轴向间隙大于进口径向间隙的压气机级.较小的出口轴向间隙削弱了叶轮通道后半段间隙流动,显著提高了叶轮后部做功能力,获得更高的级压比;并使叶轮后部间隙涡强度及涡在叶轮通道和扩压器通道内耗散损失小,压气机级效率更高.