排序方式: 共有66条查询结果,搜索用时 46 毫秒
61.
As the key part of Prognostics and Health Management (PHM), Remaining Useful Life (RUL) estimation has been extensively investigated in recent years. Current RUL estimation studies considering the intervention of imperfect maintenance activities usually assumed that maintenance activities have a single influence on the degradation level or degradation rate, but not on both. Aimed at this problem, this paper proposes a new degradation modeling and RUL estimation method taking the influence of imperfect maintenance activities on both the degradation level and the degradation rate into account. Toward this end, a stochastic degradation model considering imperfect maintenance activities is firstly constructed based on the diffusion process. Then, the Probability Density Function (PDF) of the RUL is derived by the convolution operator under the concept of First Hitting Time (FHT). To implement the proposed RUL estimation method, the Maximum Likelihood Estimation (MLE) is utilized to estimate the degradation related parameters based on the Condition Monitoring (CM) data, while the Bayesian method is utilized to estimate the maintenance related parameters based on the maintenance data. Finally, a numerical example and a practical case study are provided to demonstrate the superiority of the proposed method. The experimental results show that the proposed method could greatly improve the RUL estimation accuracy for the degrading equipment subjected to imperfect maintenance activities. 相似文献
62.
63.
与金属之间过高的接触电阻是影响碳纳米管在微纳电子器件中应用的关键因素之一,本文从形成机理和改善方法两个方面综述了近年来碳纳米管接触电阻的研究进展。介绍了利用第一性原理对碳纳米管与金属界面电子输运性能的理论研究,以及金属功函数对界面势垒调试作用的实验研究。研究表明金属与碳纳米管之间具有较弱的杂化作用和较长的接触长度时,接触电阻较小;金属与碳纳米管功函数越接近,势垒高度越低。阐述了超声焊接技术、高温退火法、金属沉积法、局部焦耳热法等常用降低碳纳米管接触电阻方法的作用机理,并分析了这些方法对器件性能的改善作用。其中局部焦耳热法操作简单、易于自动化、对器件损害小、成本低,是目前比较理想的降低碳纳米管接触电阻的方法。 相似文献
64.
文章研究了牛顿第一定律的实质及在牛顿三个定律中的地位和作用。澄清了对牛顿第一定律的一些模糊认识,对认识牛顿三定律之间的关系和理论的完备性和逻辑性提出了不同的看法。文章指出:牛顿第一定律的实质是给出了一个不受力或所受合力为零,不存在加速度的系统,即通常所说的惯性系而不是力的定义,而牛顿第二、第三定律只对惯性系才成立。惯性系也不能用牛顿定律成立与否来定义。 相似文献
65.
一种新颖的RFID多标签防碰撞算法 总被引:5,自引:0,他引:5
在标签运动较规律的无线射频识别(RFID, Radio Frequency Identification)系统中,读写器按照一般的算法不会优先读取即将离开可读范围的标签,而使系统出现较高的漏读率.针对这种场景,提出一种新的防碰撞算法——先到先服务 (FCFS, First Come First Served) 算法.读写器首先按照到达顺序对标签进行分组,先识别紧迫性高的时间分组标签;其次,算法通过新增一个参数有效避免了一些可预测的碰撞时隙.在识别时间分组的过程中设置了总时隙的上限,从而避免系统阻塞.仿真结果表明,在保持漏读率小于0.01的情况下,系统所能承受的标签运动速度比前缀随机化算法提高了50%.当标签到达率为0.45时,系统的通过率改善最明显,比前缀随机化算法提高了13%左右. 相似文献
66.
对星间链路数量非常有限、需要同时满足星间测距和星间通信需求的导航卫星网络的链路分配问题进行了研究。首先,分析了导航卫星网络的特点,并设计了一种基于有限状态自动机(FSA)的拓扑处理机制。然后,将星间测距需求作为一个约束,以星间通信的延时性能为优化目标,将导航卫星网络的链路分配问题建模为一个多目标优化问题。最后,针对建立的多目标优化问题,分别提出一种基于首次改善(FI)的本地搜索算法和基于模拟退火(SA)的启发式优化算法以对链路分配问题进行求解,并提出一种基于分支交换策略的新链路分配生成方法。仿真结果表明,通过FI算法和SA算法获得的优化链路分配的网络延时性能均得到了改进,且SA算法的性能要优于FI算法;同时,FSA的状态持续时间的减小有利于获得网络延时性能好的链路分配。 相似文献