A novel architecture of electro-hydrostatic actuator with digital distribution

To address the flow imbalance rapidly of the asymmetric Electro-Hydrostatic Actuator (EHA), this paper presents a novel architecture of asymmetric EHA with the Digital Distribution (EHA-DD). It also improves the flow nonlinearity and control accuracy of the pump, especially in the low-speed condition. The digital distribution with two High-Speed on–off Valves (HSVs) not only balances flow instead of the check valves, but also replaces the pump at the low-speed to control output flow by adjusting the PWM signal. The pump and HSVs are the crucial components to control flow output. Firstly, the flow calculation models of the pump and the duty ratio inversed model of the HSV are obtained through experimental tests and the identification method. To get the control input signal for the required flow, the pump speed and PWM duty ratio for the HSVs are inversed to compensate for flow output. Further, a multimode digital flow distribution control method based on pump speed, mainly including the pump-controlled mode for large flow demand and valve-controlled mode for little flow demand, is proposed to control the accurate flow output actively. The step extension experiments based on the flow calculation models are conducted on the EHA-DD prototype under elastic, opposite varying load. The results demonstrate that the EHA-DD realizes little position error by accurate flow control, and it is also beneficial to improve the service life of the pump.     

西安某粘接材料厂室内供暖、热水系统的设计

基于厂方对供热系统的要求,根据供热建筑物、机房和可利用设施的实际情况,采用一台换热器,通过阀门的切换,实现了供暖和供热水的分段运行。将蒸汽发生器的进水与系统补水有机地整合为一个系统,有效地解决了机房面积过小的实际困难。利用自来水的压力和热水箱与浴室的高差解决了热水供应的实际问题。     

SAR performance-based fault diagnosis for electro-hydraulic control system: A novel FDI framework for closed-loop system

Model-based fault diagnosis serves as an efficient and powerful technique in addressing fault detection and isolation (FDI) issues for control systems. However, the standard methods and their modifications still encounter some difficulties in algorithm design and application for complex higher-order systems. To avoid these difficulties, a novel fault diagnosis framework based on multiple performance indicators of closed-loop control system is proposed. Under this framework, a so-called performance residual vector is constructed to measure the differences between the real system and the nominal model in terms of system stability, accuracy, and rapidity (SAR) respectively. The criteria for quantification, normalization of the SAR residuals and the explicit mappings between the thresholds and the required performance are given. FDI can be easily achieved simultaneously by monitoring the normalized residual vector length and direction in the SAR performance residual space. A case study on electro-hydraulic servo control system of turbofan engine is adopted to demonstrate the effectiveness of the proposed method.     

一种适用于现代飞机火控系统的空-空导弹发射火控计算数学模型

给出的火控计算模型由两部分构成：首先利用机载雷达和其它传感器提供的信息,求解目标速度Vt和进入角Q,然后采用表格函数线性插值与解析修正相结合的方法,来求解导弹发射的最大、最小允许距离。最后给出了仿真结果。该数学模型已经用于某现役歼击机改装的雷达火控系统。     

全分布式通用火控系统供电控制技术

首先提出了一种全分布式通用火控系统的结构,然后以供电控制装置为对象进行了供电控制技术的研究,阐述了其功能、组成、实现方法和工作流程,最后分析了该装置的可靠性。     

JMP超高效率消防泵专用三相异步电动机的研发

JMP超高效率消防泵专用三相异步电动机是河南豫通电机股份公司与新乡市电机系统节能工程技术研究中心共同进行研究、设计、开发的新型节能专用电动机产品。其能效水平达到IE4能效等级。目前,产品开发已经完成,通过国外第三方能效检测机构的检测,取得了产品能效检测报告及出口许可的标识,并且已经批量出口到国外,得到国外客户的认可。介绍了该电动机的设计思路和样机检测结果。     

射流管伺服阀前置级压力特性

为分析射流管伺服阀射流管喷嘴高压射流区的特性,建立了射流管伺服阀前置级数学模型,得到了射流管偏移值、射流管喷嘴半径和接收孔半径对接收器压力分布、喷嘴出口流速及接收器的左右孔恢复压力的影响规律.流场分析发现射流管喷嘴的高速射流出口处容易产生旋涡,且存在环状负压效应.结果表明:高压射流状态下,射流管喷嘴半径增大,恢复压力增加;接收孔半径增大,恢复压力降低.接收孔半径与射流管喷嘴半径之比的最佳取值区间为[1.3,1.5].当射流管偏移值增大时,在偏移值增大一侧,射流管与接收孔之间的有效流体接收面积增大,射流管与接收孔之间的流体旋涡扩大,内部流场环状负压效应增加,接收孔恢复压力降低.      

双独立闭环复合液压伺服控制体系的分析

针对现有几种液压伺服控制系统的优缺点,基于高性能和节能这一发展趋势,提出基于伺服电机、定量泵、蓄能器和伺服阀的双独立闭环的新型复合控制体系.分析了其结构特点,建立了数学模型并进行了仿真分析和实验验证,证明新型控制体系充分发挥了各个控制环节的效能,实现了流量适应,较现有的控制方案简单可靠,在综合指标方面有了很大的提高,适合机载液压系统和弹载液压系统.      

基于气动热力模型的FADEC系统FHA方法

从适航规章对全权限数字发动机控制(full authority digital engine control,简称FADEC)系统的安全要求出发,结合功能危险分析(functional hazard assessment,简称FHA)的一般原则和FADEC系统的特点,得到了FADEC系统FHA的分析要素.根据分析要素中的工具与数据需求,将航空发动机气动热力模型用于可调放气活门(variable bleed valve,简称VBV)控制功能失效危险分析,结果表明:①该模型能够辅助确定FADEC系统功能失效的发动机影响;②FADEC系统功能危险的模型分析方法通过定量分析确定发动机影响的危险等级,为FHA提供直观的参考依据,可作为对专家经验的补充.      

激光冲击强化提高主动连杆振动疲劳性能

针对某型发动机放气活门主动连杆转接R处的疲劳断裂问题,进行了主动连杆激光冲击强化工艺研究;完成了原型件和激光冲击强化、喷丸及加大R3种处理工艺后主动连杆振动疲劳对比试验.结果表明,在317MPa的应力水平下,激光冲击强化、喷丸和加大R后主动连杆疲劳寿命分别为原型件的5.24倍、3.89倍及1.36倍;与其它2种工艺相比,激光冲击强化具有强化效果好、工艺稳定性高、易于实现等优点,是截至目前减少主动连杆疲劳断裂故障的最佳处理工艺.主动连杆激光冲击强化后表面粗糙度较小,产生深度约1.4mm的高数值残余压应力层,表层晶粒细化至纳米晶并伴随高密度位错.三者共同作用可以有效缓解转接R处的应力集中,抑制疲劳裂纹在转接R处的萌生和扩展,是主动连杆振动疲劳寿命提高的主要原因.