A CFD-based numerical virtual flight simulator and its application in control law design of a maneuverable missile model

A CFD-based Numerical Virtual Flight (NVF) simulator is presented, which integrates an unsteady flow solver on moving hybrid grids, a Rigid-Body Dynamics (RBD) solver and a module of the Flight Control System (FCS). A technique of dynamic hybrid grids is developed to control the active control surfaces with body morphing, with a technique of parallel unstructured dynamic overlapping grids generating proper moving grids over the deflecting control surfaces (e.g. the afterbody rudders of a missile). For the flow/kinematic coupled problems, the 6 Degree-Of-Freedom (DOF) equations are solved by an explicit or implicit method coupled with the URANS CFD solver. The module of the control law is explicitly coupled into the NVF simulator and then improved by the simulation of the pitching maneuver process of a maneuverable missile model. A nonlinear dynamic inversion method is then implemented to design the control law for the pitching process of the maneuverable missile model. Simulations and analysis of the pitching maneuver process are carried out by the NVF simulator to improve the flight control law. Higher control response performance is obtained by adjusting the gain factors and adding an integrator into the control loop.     

High-fidelity trajectory optimization for aeroassisted vehicles using variable order pseudospectral method

In this study, the problem of time-optimal reconnaissance trajectory design for the aeroassisted vehicle is considered. Different from most works reported previously, we explore the feasibility of applying a high-order aeroassisted vehicle dynamic model to plan the optimal flight trajectory such that the gap between the simulated model and the real system can be narrowed. A highly-constrained optimal control model containing six-degree-of-freedom vehicle dynamics is established. To solve the formulated high-order trajectory planning model, a pipelined optimization strategy is illustrated. This approach is based on the variable order Radau pseudospectral method, indicating that the mesh grid used for discretizing the continuous system experiences several adaption iterations. Utilization of such a strategy can potentially smooth the flight trajectory and improve the algorithm convergence ability. Numerical simulations are reported to demonstrate some key features of the optimized flight trajectory. A number of comparative studies are also provided to verify the effectiveness of the applied method as well as the high-order trajectory planning model.     

复合材料裙级间连接结构强度预测

针对复合材料裙级间螺栓-柱销连接结构试件,建立了三维有限元逐渐损伤模型。该模型可模拟试件损伤起始、发展及最终破坏的整个过程,并能较好预测试件破坏的模式和强度。该模型包括应力分析、失效判定准则和材料性能退化3个步骤,采用该模型对试件进行了损伤扩展分析和强度预测,计算结果与实验结果较吻合。     

涡轮盘多轴低循环疲劳寿命可靠性分析

多轴低循环疲劳是航空发动机涡轮盘的主要失效模式,应用多轴疲劳寿命预测的等效应变模型和临界面模型对某涡轮盘中心孔的疲劳寿命进行了预测,并与试验寿命进行了对比,得出等效应变模型预测结果均偏于危险,并且误差较大,而临界面模型误差较小,尤其拉伸型破坏的SWT模型误差在10%以内。进一步选取SWT模型进行了涡轮盘的寿命可靠性分析,鉴于多轴疲劳试验复杂、费用高并缺少统计数据,利用现有单轴疲劳试验数据将疲劳性能参数表示为标准正态随机变量的函数,将SWT模型随机化建立多轴疲劳寿命概率模型,得到可靠度0.998 7的涡轮盘寿命,与试验估计给出的技术寿命较为接近。     

直升机旋翼桨叶的弹性碰撞动力学建模

建立了直升机旋翼桨叶弹性正碰撞的动力学模型,采用有限转动梁理论处理桨叶的弹性变形,利用Hertz接触理论处理局部弹性变形,引入位移协调方程识别弹性碰撞载荷,运用Hamilton原理建立了桨叶正碰撞的动力学方程.通过与Timoshenko算例的对比表明了该方法的正确性,且对集中质量与直升机桨叶的弹性正碰撞问题进行了研究.      

某型发动机燃烧室出口温度计算方法分析及应用

概要介绍了某型航空发动机燃烧室出口温度的2种计算方法,结合发动机试车数据对采用2种计算方法得到的结果进行了对比分析。结果表明：采用涡轮流量法计算某型发动机燃烧室温度的结果比采用压气机特性法得到的计算结果更接近实际结果。     

单晶合金蠕变性能影响因素分析

通过分析热处理工艺、元素含量、晶体取向性以及温度和应力对蠕变性能的影响,得出任何1种影响合金蠕变性能的因素其实质都是改变了合金的微观组织,并最终反映到γ′筏形的完善程度S、终端密度TD和线性密度LD上。S值越接近1,γ′筏形的完善程度越好,蠕变寿命就越长;而TD和LD值越大,微观组织图内筏形交叉和中断的数目就越多,蠕变寿命就越短。     

基于三角原理的压电驱动微位移定位机构的设计与分析

设计了一种基于三角原理的精密柔性定位机构,机构由压电叠堆作为驱动元件,经由柔顺机构输出缩小的位移.进行了理论计算和有限元分析并在样机上进行了静态特性的实验,结果表明该柔顺机构可以实现预期的运动.     

基于单学科可行法的多学科可靠性设计优化

 近年来对多学科系统中不确定性的研究逐渐增多。针对该问题的计算复杂性,利用序列优化及可靠性评估（SORA）框架,提出用单学科可行（IDF）方法来求解多学科可靠性设计优化（RBMDO）问题。此方法将可靠性分析和多学科设计优化分离开来,分为确定性多学科设计优化和可靠性分析两个问题顺序执行,以提高计算效率。可靠性分析和优化的过程都采用多学科设计优化中高效的方法——IDF方法。最后通过例子验证此方法的有效性,算例结果表明,采用基于IDF的方法,学科1和学科2所用的函数计算次数分别减少了28.9%和25.0%。     

基于浸入边界法的低雷诺数流固耦合数值模拟(英文)

提出一种基于SIMPLE算法的非定常流固耦合计算方法。流体Navier-Stokes方程空间采用非结构化网格有限体积法离散,时间项采用了欧拉隐式方法。利用浸入式边界方法模拟静止或者运动固体区域,流固界面作用力通过流体体积(VOF)方法进行处理。从而可以用固定网格求解任意复杂区域中的流固耦合作用。本文模拟了低雷诺数静止及振荡圆柱绕流,所得结果与文献中贴体网格计算结果吻合,从而验证了本文方法的合理性和正确性。