双轴应力下含裂纹加筋曲板剩余强度的弹塑性有限元计算

 采用考虑了大应变的弹塑性有限元方法,以裂纹尖端张开角为断裂准则,实现了双向受载条件下加筋曲板中裂纹起裂到失稳整个扩展过程的数值模拟计算;还对与加筋曲板有同样尺寸的加筋平板进行了分析和计算。结果表明,所提出的分析方法和所采用的断裂准则适用于对含裂纹加筋结构所进行的剩余强度分析。     

关于非结构网格生成中的背景函数

背景信息对于用阵面推进法生成非结构网格是一个关键的环节.文章基于众多文献中提到的背景信息提供方法,提出一种更为实用的背景信息提供技术.此方法不仅避免了不必要的机时,内存的消耗,又使网格具有光滑性,网格的生成具有灵活性,方便性的特点.基于生成的网格采用有限体积法研究无粘高超音速化学非平衡流的流场分布,生成的网格能够成功的运用于高超音速化学非平衡流的数值计算。     

热障涂层红外热无损检测的建模和有限元分析

在柱坐标系下以轴对称模型描述热障涂层结构TNDT(Thermal Non-Destructive Testing)的瞬态热传导,建立相应的物理模型.用有限元分析软件ANSYS计算热障涂层结构受热脉冲激励后的温度场,研究TNDT可检信息参数(如最大温差和最大对比度)与脱粘缺陷半径、深度、涂层厚度的关系.结果表明,在涂层厚度一定时,最大温差和最大对比度与脱粘缺陷半径成非线性关系,它们随着缺陷半径的增大而增加,且存在上限饱和值;在缺陷半径一定时,最大温差和最大对比度与涂层厚度成非线性关系,且随着涂层厚度的增加而减小.这些研究结果为热障涂层内部脱粘的红外热无损检测及表征提供了基本理论依据.     

基于本体映射的产品概念设计方案生成新方法

将本体与本体映射引入产品概念设计方案生成领域,提出了一种基于本体映射的产品概念设计方案生成新方法,有助于解决传统概念设计方案生成算法中由于知识描述不一致而导致的产品设计知识重用困难,以及设计方案生成准确性低的问题.该方法使用本体知识表示方法建立产品设计知识库;使用本体映射算法自动地搜索产品设计知识库中符合设计需求的产品概念设计方案.通过起重机起升机构驱动装置设计实例,验证了基于本体映射的产品概念设计方案生成新方法的正确性和有效性.     

压电复合材料壁板颤振的控制

针对考虑热效应的壁板颤振问题,利用von Karman大变形应变-位移关系、气动力活塞理论和准定常热应力理论建立了埋入压电材料的复合材料板颤振的气动弹性力学模型,使用Bogner-Fox-Schmit单元推导出壁板颤振的非线性有限元方程.将该动力学方程转换到状态空间模型,给出了基于这个非线性模型的最优控制.应用Runge-Kutta方法在时域内对一个四边简支的含压电材料的复合材料壁板颤振的控制进行了仿真,数值结果证明了该方法的有效性.     

复合材料格栅结构的强度分析

复合材料格栅结构是由连续纤维缠绕的斜向及环向肋和蒙皮组成的结构。对ANSYS软件进行了二次开发,分别采用层合板和层合梁单元模拟复合材料格栅结构的蒙皮和肋。根据复合材料格栅结构的几何特征及其载荷分布特征,采用周期对称有限元模型,分别以最大应力准则、最大应变准则和蔡-吴准则和Chang刚度退化准则对轴压载荷作用下的复合材料格栅结构破坏过程进行了强度预测,计算结果表明采用蔡-吴准则预测并结合Chang刚度退化准则的计算结果与试验结果的一致性较好。     

Modelling of Spall in an Anisotropic Aluminium Alloy

Spall caused by hypervelocity impacts at the lower range of velocities could result in significant damage to spacecraft. A number of polycrystalline alloys, used in spacecraft manufacturing, exhibit a pronounced anisotropy in their mechanical properties. The aluminium alloy AA 7010, whose orthotropy is a consequence of the meso-scale phase distribution or grain morphology, has been chosen for this investigation. The material failure observed in plate impact was simulated using a number of spall models. The Hugoniot elastic limit and spall strength have been studied as a function of orientation, and compared to experimental results.     

Investigation on Thermal and Dimensional Stability of Epoxy Resin In-Situ Modified by Cyanate Ester Resin and Polydimethylsiloxane

The thermal and dimensional stability of epoxy resin (EP) in-situ modified by cyanate ester (CE) and polydimethylsiloxane (PDMS) are investigated by means of experiments and numerical simulation. Thermal gravimetric analysis (TGA) and differential scanning calorimeter (DSC) are used to analyze the heat resistance of the modified EP. The dimensional stability is characterized by the volume shrinkage of the series PDMS/CE/EP obtained by the density method. The chemical structure of the PDMS/CE/EP is analyzed by Fourier transform infrared spectroscopy (FTIR). The results of TGA and DSC indicate that the thermal stability of PDMS/CE/EP decreases firstly and then increases with the increase in the amount of CE. The addition of PDMS shows a slight effect on the thermal stability. The 40% CE makes the blending system exhibit the lowest initial decomposition temperature, which reduces by 15.5% and 40.8% compared with pure EP and CE, respectively. The FTIR results suggested that the influence of CE on the thermal stability of the modified EP is mainly ascribed to the generation of oxazolidinone ring with low thermal stability and the increase in the triazine ring with high thermal stability. The volume shrinkage measurement results show that the introduction of CE and PDMS are both beneficial to the improvement of the dimensional stability of the blending systems. The in-situ addition of 80% CE shows the lowest volume shrinkage of 6.11%. The thermal stress distribution of PDMS/CE/EP generated during the solidification process is simulated by the finite element analysis. The results suggested that the introduction of 80% CE into EP results in the lowest thermal stress in the blending system, which indicates that the system has the lowest volume shrinkage, which agrees well with the experimental results.     

星载大型网状天线非线性结构系统有限元分析

论述了大型网状可展开天线的非线性理论模型及其非线性模拟有限单元模型,并以一副4．2m天线为例进行了有限元建模分析,获得了这类天线的动力学振动特性。研究结果表明：拉索几何非线性和间隙接触非线性对大型网状天线系统的动力学特性具有较大影响。     

一种基于随机集的目标跟踪算法研究

针对多传感器多目标跟踪问题,提出了基于随机有限集的概率假设密度（PHD）滤波算法。该算法通过选取与各传感器相关的重要性密度函数,层层更新各传感器的采样粒子,达到多传感器多目标有序PHD跟踪。给出了应用该算法的具体步骤,通过仿真实例证明该算法的有效性。