飞机用固体膜润滑剂

针对新机种对固体膜润滑剂的需求,研制了两种固体膜润滑剂-HR-7201和HR-7101.润滑剂采用国产原材料,具有摩擦系数低,耐高低温及耐介质等优良性能,使用温度HR-7201为-60～300℃,HR-7101为-60～200℃,短期可到250℃.已通过飞机典型零部件试验及长期试车考核,并在飞机上应用.     

Solar and Solar-Wind Composition Results from the Genesis Mission

The Genesis mission returned samples of solar wind to Earth in September 2004 for ground-based analyses of solar-wind composition, particularly for isotope ratios. Substrates, consisting mostly of high-purity semiconductor materials, were exposed to the solar wind at L1 from December 2001 to April 2004. In addition to a bulk sample of the solar wind, separate samples of coronal hole (CH), interstream (IS), and coronal mass ejection material were obtained. Although many substrates were broken upon landing due to the failure to deploy the parachute, a number of results have been obtained, and most of the primary science objectives will likely be met. These objectives include He, Ne, Ar, Kr, and Xe isotope ratios in the bulk solar wind and in different solar-wind regimes, and ¹⁵N/¹⁴N and ¹⁸O/¹⁷O/¹⁶O to high precision. The greatest successes to date have been with the noble gases. Light noble gases from bulk solar wind and separate solar-wind regime samples have now been analyzed. Helium results show clear evidence of isotopic fractionation between CH and IS samples, consistent with simplistic Coulomb drag theory predictions of fractionation between the photosphere and different solar-wind regimes, though fractionation by wave heating is also a possible explanation. Neon results from closed system stepped etching of bulk metallic glass have revealed the nature of isotopic fractionation as a function of depth, which in lunar samples have for years deceptively suggested the presence of an additional, energetic component in solar wind trapped in lunar grains and meteorites. Isotope ratios of the heavy noble gases, nitrogen, and oxygen are in the process of being measured.     

Kinetic Monte Carlo Simulation of EB-PVD Film:Effects of Substrate Temperature

The 2D kinetic Monte Carlo (KMC) simulation was used to study the effects of different substrate temperatures on the microstruc-ture of Ni-Cr films in the process of deposition by the electron beam physical vapor deposition (EB-PVD). In the KMC model, substrate was assumed to be a “surface” of tight-packed rows, and the simulation includes two phenomena: adatom-surface collision and adatom diffusion. While the interaction between atoms was described by the embedded atom method, the jumping energy was calculated by the molecular static (MS) calculation. The initial location of the adatom was defined by the Momentum Scheme. The results reveal that there exists a critical substrate temperature which means that the lowest packing density and the highest surface roughness structure will be achieved when the temperature is lower than the smaller critical value, while the roughness of both surfaces and the void contents keep decreasing with the substrate temperature increasing until it reaches the higher critical value. The results also indicate that the critical substrate temperature rises as the deposition rate increases.     

航天器太阳电池阵驱动装置的新进展

通常长寿命三轴稳定卫星都采用帆板式太阳电池阵进行能源供应,并使用太阳电池阵驱动装置使电池阵对日定向。国际上从20世纪60年代开始,不断开发研制太阳电池阵驱动装置,以满足在大功率、小型化、适应恶劣环境等方面的特殊需求,经过几代的发展,取得了长足的进步。根据国内收集的相关信息和资料,通过介绍国际该领域的发展及对应需求的典型产品,尝试分析该领域中相应的应用、研究的重点及发展的方向。     

旋转整流罩积冰过程中水膜流动和脱离的数值研究

为了更准确地模拟旋转整流罩积冰过程,在现有三维积冰与冰层表面薄水膜流动耦合模型基础上,基于功平衡分析的方法引入了旋转部件表面水膜脱离模型,并发展了相应的计算方法,给出了水膜脱离的判定依据:当气流曳力做的功和由于离心力使水膜增加的潜能之和大于黏附功时整流罩表面的水膜会发生脱离。对旋转整流罩积冰进行数值模拟,计算结果与实验结果吻合得较好,验证了该模型的合理性和计算方法的可行性。之后分析了转速和来流速度对整流罩表面水膜脱离和积冰的影响,结果表明:转速和来流速度越大,水膜发生脱离的比例越大。在研究范围内,转速为3000r/min和6000r/min时,因水膜脱离导致积冰总量分别减少13.4%和15.8%;来流速度为40、50m/s和60m/s时,因水膜脱离导致积冰总量分别减少为12.2%、13.4%、14.2%。      

基于两相流模型的挤压油膜阻尼器空化流场特性数值模拟

基于气液两相流理论中的Mixture模型和Zwart-Gerber-Belamri空化模型,采用动网格技术建立了两端开口中心槽供油型挤压油膜阻尼器三维非定常空化流场求解模型。数值模拟表明:随着阻尼器内环进动,考虑两相流动的油膜低压区在中心槽的两侧产生两道对称的条状负压带,条状带内具有较高的气相体积分数;阻尼器低压区的压力和气相体积分数对进油孔位置十分敏感,阻尼器油膜力和流场气穴比的变化频率与进油孔数密切相关。内环同心进动半径、进动频率对阻尼器空化流场影响的数值计算表明,进动半径和频率的增大均会使得流场内的空化现象加剧,同时气穴比的相位滞后现象愈加显著。      

背压对撞击式喷嘴雾化特性影响研究

为研究背压对撞击式喷嘴雾化特性的影响,将压力的变化等效为气体密度的变化,基于一种树形自适应加密算法,通过直接数值求解不可压Navier-Stokes方程组实现了不同背压条件下射流撞击雾化的数值模拟。首先将数值模拟结果与试验数据进行对比,验证数值模拟的有效性,在此基础上开展了高背压条件下雾化过程的数值模拟。结果表明,随着背压的提高,气动力相应增强,液膜的破碎更加剧烈,一次雾化区域的液滴数密度增大,雾场由稀疏向稠密发展;液膜在向下游运动过程中波动速度的幅值逐渐增大,并且随着背压的提高,液膜的波动由线性向非线性转变;背压增大导致破碎长度减小,经过参数修正得到了液膜破碎长度的经验公式,并与试验数据进行了对比;背压对液滴尺寸分布规律没有显著影响,但随着背压的提高,同一时刻大液滴所占的比例提高,整个雾场的Sauter平均直径有增加的趋势,当背压从0.1MPa增大到1MPa时,雾场的Sauter平均直径由155.5μm增大到166.9μm;背压增大,液滴粒径分布的均匀度指数减小,液滴尺寸分布更加不均匀。     

高湍流度时全气膜涡轮叶片表面冷却和换热特性的实验研究

为获得高主流湍流度时全气膜涡轮叶片表面的冷却和换热特性,在跨声速风洞中实验研究了质量流量比(MFR)和主流雷诺数(Re)对叶片表面气膜冷却效率和换热系数比的影响。在叶片前缘布置了5排圆形孔,在吸力面和压力面分别布置了3排和6排圆形孔,实验结果由嵌入在叶片中截面的热电偶测得。实验中基于弦长的主流雷诺数的范围为3.0×105～9.0×105,叶栅出口马赫数Ma为0.8, MFR的范围是5.5%～12.5%,主流湍流度Tu为14.7%。实验结果表明:主流雷诺数升高显著增强了叶片表面的换热,使层流边界层到湍流边界层的转捩位置提前。对于吸力面S/C0.2的区域(S/C为当地弧长与弦长之比),气膜冷却效率受MFR影响明显,当MFR大于7.7%时提高MFR会导致气膜冷却效率降低;该区域的换热系数比在中低雷诺数时受MFR影响较小,在高雷诺数时随MFR升高而升高。压力面S/C-0.7区域的气膜冷却效率随MFR升高而升高,-0.7S/C-0.4区域的气膜冷却效率受MFR影响较小,对于整个压力面而言,MFR升高提高了叶片表面的换热系数。相对于叶片其它区域,压力面后半段区域和吸力面的气膜冷却效率受雷诺数影响较大。     

基于FQFD的太阳能无人机设计指标排序方法

为解决太阳能无人机（UAV）总体设计中任务需求表达模糊、技术指标重要度排序决策困难的问题,提出了基于模糊质量功能展开（FQFD）的太阳能无人机总体设计指标排序方法。该方法在传统质量功能展开（QFD）质量屋的基础上,引入三角模糊数,表征任务需求的不确定性和模糊性;在模糊隶属度函数未知的情况下,采用α加权修正水平截集去模糊化方法计算技术指标重要度,获得技术指标重要度排序,为总体设计优化决策提供依据。最后以长航时太阳能无人机的总体设计为例,对任务需求—工程特性—技术指标的两级质量屋模型进行计算分析,得到续航能力、巡航高度、动力系统效率、巡航速度和气动效率是太阳能无人机最重要的5个技术指标的结果。此方法客观性较强,可处理复杂的系统不确定性,为太阳能无人机总体方案设计及决策应用提供参考依据。     

铌掺杂ITO镀膜玻璃电磁散射特性试验

座舱玻璃镀膜是实现飞行器隐身技术的重要途径之一。利用雷达散射截面(RCS)均值增益研究铌掺杂ITO镀膜玻璃隐身性能;针对不同方块电阻的铌掺杂ITO镀膜玻璃,进行系列化RCS暗室测试,分析不同入射频率、极化方式的电磁散射特性。结果表明:方块电阻增大时电磁散射减弱,合适的方块电阻(小于40Ω/m~2)有利于实现座舱外形隐身,散射特性与金属接近,频率较高时,镜面散射波峰较窄。