汽雾两相流强化冷却燃气轮机叶片内冷通道

实验研究了方形通道这一重型燃气轮机中常用叶片强制对流冷却通道结构.分析了雷诺数、壁面热流密度以及水雾质量流量比等关键参数对汽雾冷却通道的传热特性的影响,并建立了考虑离散相水雾的流动工况和通道壁面加热条件的实验关联式.结果表明:相对于纯蒸汽,汽雾两相流的传热系数显著提高,且传热性能提高的幅度随热流密度的增大而减小,随雷诺数和水雾质量流量比的增大而增大;通道上壁面平均传热系数低于下壁面,在高热流密度和低水雾质量流量比下,两者相差约13%,而在低热流密度与高水雾质量流量比的情况下,该比值增加到约25%.      

Probing the origin of the iron Kα line around stellar and supermassive black holes using X-ray polarimetry

Asymmetric, broad iron lines are a common feature in the X-ray spectra of both X-ray binaries (XRBs) and type-1 Active Galactic Nuclei (AGN). It was suggested that the distortion of the Fe Kα emission results from Doppler and relativistic effects affecting the radiative transfer close to the strong gravitational well of the central compact object: a stellar mass black hole (BH) or neutron star (NS) in the case of XRBs, or a super massive black hole (SMBH) in the case of AGN. However, alternative approaches based on reprocessing and transmission of radiation through surrounding media also attempt to explain the line broadening. So far, spectroscopic and timing analyzes have not yet convinced the whole community to discriminate between the two scenarios. Here we study to which extent X-ray polarimetric measurements of black hole X-ray binaries (BHXRBs) and type-1 AGN could help to identify the possible origin of the line distortion. To do so, we report on recent simulations obtained for the two BH flavors and show that the proposed scenarios are found to behave differently in polarization degree and polarization angle. A relativistic origin for the distortion is found to be more probable in the context of BHXRBs, supporting the idea that the same mechanism should lead the way also for AGN. We show that the discriminating polarization signal could have been detectable by several X-ray polarimetry missions proposed in the past.     

Accelerating NLTE radiative transfer by means of the Forth-and-Back Implicit Lambda Iteration: A two-level atom line formation in 2D Cartesian coordinates

State-of-the-art methods in multidimensional NLTE radiative transfer are based on the use of local approximate lambda operator within either Jacobi or Gauss–Seidel iterative schemes. Here we propose another approach to the solution of 2D NLTE RT problems, Forth-and-Back Implicit Lambda Iteration (FBILI), developed earlier for 1D geometry. In order to present the method and examine its convergence properties we use the well-known instance of the two-level atom line formation with complete frequency redistribution. In the formal solution of the RT equation we employ short characteristics with two-point algorithm. Using an implicit representation of the source function in the computation of the specific intensities, we compute and store the coefficients of the linear relations J=a+bS$J=a+\mathit{bS}$ between the mean intensity J and the corresponding source function S. The use of iteration factors in the ‘local’ coefficients of these implicit relations in two ‘inward’ sweeps of 2D grid, along with the update of the source function in other two ‘outward’ sweeps leads to four times faster solution than the Jacobi’s one. Moreover, the update made in all four consecutive sweeps of the grid leads to an acceleration by a factor of 6–7 compared to the Jacobi iterative scheme.     

含湿气流单缝冲击冷却数值模拟

对饱和湿空气夹带液滴的含湿气流单缝冲击冷却进行了数值模拟,比较研究了含湿气流中液滴相变换热/液滴载量比和单缝射流几何参数对强化换热效果的影响,研究发现:气流中液滴的加入对冷却效果的影响十分显著,热流密度为8000W/m2的条件下,空气中注入5%的液滴会比饱和湿空气对驻点区的冷却效果提高90%,当液滴载量比从1%提高到5%,冲击驻点区局部传热系数提高了32%;而合适的缝宽和冲击高度也是影响冷却效果的重要因素,在该条件下冲击高度与缝宽的比值为4.55时冲击冷却效果最佳.      

面向IMA网络文件系统的双服务器结构设计

为了提高面向IMA网络文件系统的可靠性和实时性,设计了一种双服务器结构的网络文件系统。客户优先访问主服务器,在得不到主服务器响应时,访问从服务器;主服务器在无法满足同时有多个访问请求时,把一部分的访问请求分给从服务器;主服务器和从服务器通过数据实时更新和定时检测更新,保持数据的高度一致。     

火星气囊气体发生器充气过程稳压仿真研究

文章对低温和常温环境下的气囊稳压充气过程的参数进行了仿真计算。主要分析计算了气囊内外壁的对流换热、囊内气体与囊壁间辐射以及水蒸气液化等传热方式的传热量。同时,计算了在不同环境温度下,气囊内气体温度、充气质量以及充气质量流率随时间的变化关系。分析结果可以为工程研制提供参考和数据支持。     

5kN再生冷却发动机推力室传热研究

5 kN摇摆发动机推力室采用再生冷却身部,为检验推力室冷却方案设计的合理性,对5 kN再生冷却发动机推力室进行传热计算,分析了再生冷却的影响因素,并针对发动机设计提出了相应的改进措施,改进后的发动机热试车工作正常,表明了改进工作的有效性。     

一种速度匹配动基座传递对准的方法

介绍了一种速度匹配的动基座传递对准的方法。主子惯导均采用平台系统的指北导航方式,推导了平台对准误差方程,利用主子惯导的速度差信息构建控制回路对子惯导平台的水平失准角进行反馈修正,同时用卡尔曼滤波器估计出方位失准角,从而实现子惯导的初始对准。建立了相应的模型,对该传递对准方法进行了仿真验证,在仿真时考虑了杆臂效应的影响,加入了杆臂效应的算法补偿机制。仿真结果数据跟理论推导基本吻合,验证了方法的可行性。     

气动力辅助椭圆轨道转移技术研究

研究了两种共面椭圆轨道最优转移方法--基于单纯推力的双脉冲对称转移和基于气动力辅助变轨技术的协同机动方法。推导了双脉冲对称转移问题中转移椭圆轨道的求解公式,采用遗传算法求解最优变轨点位置,给出了变轨脉冲的计算方法。将气动力辅助对称转移过程分为3段：真空飞行段、大气飞行段、真空飞行段。以能量最小为性能指标,将大气飞行段轨迹优化问题转化为标准最优控制问题模型,并利用Gauss伪谱法进行求解,得到“巡航+滑行+巡航+滑行”的大气最优飞行轨迹。最后对两种转移方法进行详细比较,指出初始椭圆轨道近地点越接近大气层,气动力辅助对称转移方法比双脉冲对称转移方法越节省能量。     

Preliminary characterization of carbon dioxide transfer in a hollow fiber membrane module as a possible solution for gas–liquid transfer in microgravity conditions

In microgravity, one of the major challenge encountered in biological life support systems (BLSS) is the gas–liquid transfer with, for instance, the necessity to provide CO₂ (carbon source, pH control) and to recover the evolved O₂ in photobioreactors used as atmosphere bioregenerative systems.