氯气泄漏后毒害区域的估算及泄漏事故处置对策探讨

结合事故现场所能发生的情况,从氯气的理化性质、危险特性、毒性等方面入手,探讨氯气泄漏后的应急处置措施,力求为抢险救援人员进行事故应急处置提供基本技术支持。并对氯气泄漏后毒害区域的估算,预测了人员的安全疏散距离。     

基于非参量法的空战态势评估分析

为了改进现有基于非参量法的空战态势评估模型,描述了空战态势评估基本问题,阐述了空战态势评估算法的发展脉络,分析了目前构造的态势评估函数没有体现方位角与进入角对态势影响的耦合关系,双方速度以及能量对态势影响的非线性等问题,提出了从空战武器攻击区的角度重新构造态势评估函数的思想,为进一步研究奠定了基础。     

Research on modeling of heat source for electron beam welding fusion-solidification zone

In this paper, the common heat source model of point and linear heat source in the numerical simulation of electron beam welding (EBW) were summarized and introduced. The combined point-linear heat source model was brought forward and to simulate the welding temperature fields of EBW and predicting the weld shape. The model parameters were put forward and regulated in the combined model, which included the ratio of point heat source to linear heat source Qpr and the distribution of linear heat source Lr. Based on the combined model, the welding temperature fields of EBW were investigated. The results show that the predicted weld shapes are conformable to those of the actual, the temperature fields are reasonable and correct by simulating with combined point-linear heat source model and the typical weld shapes are gained.     

Microstructure and mechanical properties of hybrid fabricated 1Cr12Ni2WMoVNb steel by laser melting deposition

 Laser melting deposition was carried out to deposit a 1Cr12Ni2WMoVNb steel bar on a wrought bar of same material. Room-temperature tensile properties of the hybrid fabricated 1Cr12Ni2WMoVNb steel sample were evaluated, and microstructure, fracture surface morphology, and hardness profile were analyzed by an optical microscope (OM), a scanning electron microscope (SEM), and a hardness tester. Results show that the hybrid fabricated 1Cr12Ni2WMoVNb steel sample consists of laser deposited zone, wrought substrate zone, and heat affected zone (HAZ) of the wrought substrate. The laser deposited zone has coarse columnar prior austenite grains and fine well-aligned dendritic structure, while the HAZ of the wrought substrate has equiaxed prior austenite grains which are notably finer than those in the wrought substrate zone. Besides, austenitic transformation mechanism of the HAZ of the wrought substrate is different from that of the laser deposited zone during the reheating period of the laser deposition, which determines the different prior austenite grain morphologies of the two zones. Microhardness values of both the laser deposited zone and the HAZ of the wrought substrate are higher than that of the wrought substrate zone. Tensile properties of the hybrid fabricated 1Cr12Ni2WMoVNb steel sample are comparable to those of the wrought bar, and fracture occurs in the wrought substrate zone during the tensile test.     

基于坐标变换原理的最小区域法评定空间直线度误差

介绍了一种用基于坐标变换原理的最小区域法评定空间直线度误差的算法,并且给出了数学模型和计算实例.     

轻小型光纤陀螺抗干扰技术

轻小型光纤陀螺内部干扰严重影响了其正常工作.干扰可导致陀螺输出死区,产生周期性噪声和输出非线性等现象.抑制干扰对提升陀螺性能和环境适应能力有重要的意义.对干扰的形成机理进行了理论分析,并提出了一些抑制干扰的方案.     

低温等离子体放电区长度对点火起爆的影响

为了研究低温等离子体放电区长度,即放电区间隙不变,体积大小对脉冲爆震发动机点火起爆的影响,以丙烷为燃料,空气和纯氧为氧化剂,充分考虑其详细的化学反应动力学机理,将低温等离子体放电区等效为高温高压火核,对放电区长度为20,40,60mm三种结构,利用Fluent软件,对点火起爆过程进行数值模拟,并进行对比分析.结果表明:将低温等离子体放电区等效为高温高压火核是可行的,能够得到完整的点火起爆过程;不同放电区长度,对初始火焰形成、火焰传播速度和缓燃转爆震(DDT)时间有很大影响,对爆震波峰值压力影响不大.      

Comparative study between crack closure model and Willenborg model for fatigue prediction under overload effects

A comparative study is performed between a crack closure model and the Willenborg model, which can calculate the fatigue crack growth rate under the overload effects. The modified virtual crack annealing (VCA) model is briefly reviewed, which is based on the equivalent plastic zone concept. In this method, the retardation phenomenon is explained by the crack closure level variation, which is derived from the interactions between forward and reverse plastic zones ahead of the crack tip. As a comparison, the Forman equation in conjunction with the Willenborg model is also reviewed. The retardation phenomenon is described by directly modifying the stress intensity factor. It is known that the large plastic zone created by the overload can decelerate the fatigue crack growth rate until the crack grows beyond this region. A relationship between the plastic zone and the modified stress intensity factor is developed, which is a mathematical fitting equation instead of physical-based formulation. The experimental data in aluminum alloys are used to val-idate these two models. Overall, good agreement is observed between the model predictions and the testing data. It is noted that the approach based on modified VCA model can give more accurate prediction curves than the Willenborg model.     

Modeling geomagnetically induced currents in Hokkaido,Japan

In this paper a model for computing geomagnetically induced currents (GIC) from local geomagnetic field observations carried out in Hokkaido, Japan is constructed. The model is composed of system parameters mapping the horizontal geoelectric field to GIC and of 1D conductivity model. A rigorous model validation is used to show that the model reproduces the observed GIC with a very good accuracy.     

旋流器关键参数对双旋流冷态流场特性的影响

为了探究中心分级双旋流燃烧室内冷态流场特性,采用粒子成像测速法PIV(Particle im?age velocimetry)方法进行研究,揭示了值班级与主燃级旋流的相互作用及其对双旋流燃烧室内流场的影响机制,获得了值班级旋流强度、主燃级旋流强度和两级旋流之间的空气比例等旋流器关键参数对燃烧室内流场的影响规律.结果表明...