基于TC783A的三相电动机缺相保护电路的设计与实现

介绍用于三相电动机缺相保护装置的设计方法,采用集成芯片TC783A为核心元件实现,有效地解决三相电动机其他保护元件的局限性。具有快速切断控制回路电源的功能及缺相指示和相序指示,试验证明系统工作性能良好。     

The role of motor processes in mental rotation: selective shaping of cognitive processing via specific sensorimotor experience

The involvement of motor processes in mental rotation is experience-dependent: different levels of expertise in sensorimotor interactions lead to different strategies in mental rotation. In the present study, wrestlers, gymnasts, and nonathletes physically rotated objects that were either light (wooden) or heavy (lead) but otherwise having the same sizes and shapes. They then performed a mental rotation task using photographs of these objects in which the material and therefore the weight was visible. I hypothesized that wrestlers would rely more heavily on experience-based sensorimotor strategies in performing mental rotation because during their athletic practice they not only manipulate external “objects” (i.e., their opponent) but also have to plan future actions taking into account past experience of these “objects” (for example their weight). All participants reported that lead objects were harder to physically rotate than wooden ones. However, only wrestlers mentally rotated lead objects more slowly than wooden ones—as they would if they were physically rotating them—suggesting the involvement of motor processes. These findings show that the involvement of motor processes in mental rotation depends on specific rather than mere sensorimotor experience.     

Three-dimensional numerical analysis on combustion performance and flow of hybrid rocket motor with multi-segmented grain

This paper presents the combustion characteristics in hybrid rocket motors with multi-segmented grain through three-dimensional numerical simulations. Multi-segmented grain is composed of several thin grains with two or more ports. The numerical model consists of Navier-Stokes equations with turbulence, solid fuel pyrolysis, chemical reactions, a fluid–solid coupling model and a regression rate model. The simulations adopt 90% Hydrogen Peroxide (HP) and PolyEthylene (PE) as the propellant combination. The effects of the rotation, port number, fuel grain segment number and mid-chamber length on the flow field and combustion performances are analyzed. The results indicate that the multi-segmented grain configuration can strengthen the flow field, and the regression rate and combustion efficiency are enhanced. Take the cases with two grain segments and three ports for example, the regression rate is increased by 32.4%−45.1% and the combustion efficiency increases by 6%−8.6% in different rotation angles.     

某型飞机大修中冷液系统常见故障排除方法

从实际工作经验出发，总结了一整套针对某型飞机液压系统和冷气系统常见机械故障的判断、分析、查找及排除方法。     

低速大转矩永磁游标电机在发酵罐中的应用

采用秸秆生产丁醇时,为了达到高效率发酵,需要使发酵液中菌体分布均匀,所加物料需要及时搅拌。工业化生产丁醇的发酵罐尺寸较大,搅拌过程对驱动电机的输出转矩要求较高,因此高效率、小体积、低速大转矩的秸秆发酵搅拌电机对工业化发酵生产丁醇意义重大。设计了一种定转子永磁游标电机用于发酵液搅拌,并对电机的槽极数、电磁性能进行了具体的研究。制造样机并采用滞环控制实现了对液态发酵对象的快速响应,且实现了低能耗、高效率的发酵过程。     

阵风载荷减缓系统故障分析

阵风引起的额外载荷会引起飞机结构疲劳,降低结构使用寿命。采用非定常气动力有理函数拟合方法建立时域状态空间下的动力学系统,设计了阵风载荷减缓系统。研究了阵风载荷减缓系统3种典型故障模式(副翼偏转饱和、舵机卡死、副翼偏转延时)的力学建模方法,并对机翼在阵风减缓系统故障模式下的阵风响应进行分析。仿真结果表明,3种故障模式均不利于阵风载荷减缓系统对阵风载荷的减缓,对于一些特定情况,故障模式下的阵风载荷减缓系统不仅不能减缓阵风载荷,还会带来由副翼偏转不当引起的额外负载。     

某型飞机通信电台干扰油量系统故障分析

针对某型飞机通信电台干扰油量系统故障，分析了油量测量系统的原理和电磁干扰机理，研究了故障发生的原因，制定了抑制干扰的措施，解决了一直困扰修理的油量指示系统跳变问题，提高了飞机修理质量。     

基于一致性融合和神经网络的航空发动机气路系统故障诊断方法

以信息融合为基础,运用GRNN神经网络对航空发动机气路系统进行故障诊断,提出了一种基于一致性融合和神经网络相结合的故障诊断方法。试验结果表明,该方法能快速识别航空发动机气路系统故障,并且对其他机械设备的故障诊断具有一定的参考价值。     

某型涡轴发动机起动冷转异响故障分析

针对外场某型涡轴发动机首次装直升机起动冷运转过程中,发动机有异常响声的故障现象,对发动机进行了分解检查、质量复查、原因分析和机理分析等工作,找准了故障原因,制定了预防措施,完善规范了发动机装配工艺规程,有利于预防同类故障的再发生,提高了该型航空发动机的安全性和可靠性。     

基于快速非奇异终端滑模的姿态控制技术

针对存在执行器故障与外部干扰的刚体飞行器姿态控制系统,提出一种基于快速非奇异终端滑模(NSFTSM)的姿态容错控制方法.控制方法不仅保证姿态机动过程的快速性,而且避免了传统的终端滑模面所带来的奇异性问题.采用二阶鲁棒精确微分器估计执行器故障与外部干扰,采用快速非奇异终端滑模技术设计姿态容错控制律,根据Lyapunov稳定性理论证明了方法的稳定性.稳定性分析表明,通过引入新型快速非奇异终端滑模,控制器使得闭环系统能够快速收敛到滑模面的微小邻域内,进而收敛到系统平衡点的微小邻域内,并且系统对外部干扰具有较强的鲁棒性.数值仿真结果验证了方法在姿态跟踪控制中的有效性.