A novel testability model for health management of heading attitude system

Prognostics and health management (PHM) is very important to guarantee the reliability and safety of aerospace systems, and sensing and test are the precondition of PHM. Integrating design for testability into early design stage of system early design stage is deemed as a fundamental way to improve PHM performance, and testability model is the base of testability analysis and design. This paper discusses a hierarchical model-based approach to testability modeling and analysis for heading attitude system health management. Quantified directed graph, of which the nodes represent components and tests and the directed edges represent fault propagation paths, is used to describe fault-test dependency, and quantitative testability information is assigned to nodes and directed edges. The fault dependencies between nodes can be obtained by functional fault analysis methodology that captures the physical architecture and material flows such as energy, heat, data, and so on. By incorporating physics of failure models into component, the dynamic process of a failing or degrading component can be projected onto system behavior, i.e., system symptoms. Then, the analysis of extended failure modes, mechanisms and effects is utilized to construct fault evolution-test dependency. Using this integrated model, the designers and system analysts can assess the test suite’s fault detectability, fault isolability and fault predictability. And heading attitude system application results show that the proposed model can support testability analysis and design for PHM very well.     

机载电源系统故障规律分析

通过对机载电源系统的常见、多发故障进行总结分析．结合实际维修经验找出故障规律．以达到快速定位、准确排故的目的,为排除同类故障提供参考。     

综合通信导航识别系统的故障注入方法研究

针对综合通信导航识别系统的综合化、模块化特点，在综合分析系统故障检测诊断机制、构建系统故障信息库的基础上，设计了一种面向综合通信导航识别系统的软件故障注入方案，可提高综合通信导航识别系统故障诊断软件的效能。通过利用此方案进行故障注入试验，验证了综合通信导航识别系统故障诊断软件的功能和性能。     

柔性空间机械臂的自适应H∞容错抑振混合控制

针对关节执行器存在部分失效(PLCE)故障的漂浮基柔性空间机械臂系统，提出一种自适应H∞容错抑振混合控制算法。结合拉格朗日法与弹性振动理论推导出了系统的动力学微分方程，并截取反映柔性臂杆主振型的前两阶模态作振动分析。根据奇异摄动原理对系统进行降维，并将其分解为一个刻画刚性臂杆轨迹跟踪的慢变子系统与一个刻画柔性臂杆模态振动的快变子系统；由此设计了由慢变子系统的自适应H∞容错控制器及快变子系统的线性最优减振控制器组成混合控制器。与传统容错控制器相比，所设计的自适应H∞容错控制器具有无需获取故障先验知识的优点。对比仿真结果表明：慢变子系统的容错控制器对于PLCE型关节执行器故障具备较强的鲁棒性，快变子系统的线性最优减振控制器能够将柔性臂杆的振动模态调节至较低水平，从而校验了理论分析的正确性与混合控制策略的有效性。     

Evaluation of thermal effects on temperature-sensitive operating force of flow servo valve for fuel metering unit

The temperature-induced variation in operating force of flow control valves may result in performance degradation or even jam faults of fuel metering unit (FMU), which significantly affects the safety of aircrafts. In this work, an analytical modeling approach of temperature-sensitive operating-force of servo valve is proposed to investigate the temperature characteristics in varying temperature conditions. Considering the temperature effects, a new extended model of flow force is built and an analytical model of valve friction is also derived theoretically based on the dynamic clearance induced by thermal effects. The extremum condition of friction is obtained to analyze the characteristic-temperature points where jam faults occur easily. The numerical results show that flow force increases firstly and then decreases as temperature increases under a constant valve opening. The maximum friction of flow servo valve can be uniquely determined when the structural parameters and ambient temperature are given. The worst situation just happens at the characteristic-temperature points, which are linearly related to the axial temperature gradients of valve spool. Such evaluations may give an explanation for the temperature-induced jam faults of vulnerable valves and provide a reference for designers to determine a suitable working-temperature range of valves in practice.     

电子设备故障预测与健康管理技术发展新动态

电子设备是各类航空、航天等高新技术装备必不可少的重要组成部分。与机械类设备存在明显退化状态征兆不同，电子设备退化状态无明显的外在表现，尚无有效征兆对其状态进行刻画，对其进行故障预测与健康管理存在一定的困难。针对该问题，梳理了电子设备故障预测与健康管理技术的基本概念和内涵，介绍了电子设备故障预测与健康管理技术的国内外研究现状，分析了当前复杂电子设备故障预测与健康管理技术面临的挑战和对策。在此基础上，结合未来复杂电子设备新特点及该领域最新研究进展，从基于间歇故障特征的健康状态表征、面向故障预测与健康管理的测试性设计和多源特征融合的健康状态评估等方面，提出了电子设备故障预测与健康管理技术发展的新方向。     

基于近邻保持嵌入的卫星姿态控制系统微小故障检测

摘要： 以卫星姿态控制系统(ACS)为研究对象，以微小故障检测为研究目标，提出一种改进的近邻保持嵌入算法(EWMA DNPE).针对近邻保持嵌入(NPE)算法中邻域参数无法自动设定的缺陷，通过引入动态邻域，使得动态近邻保持嵌入算法（DNPE）可根据流形的样本密度动态地选取近邻点计算权值重构矩阵.将指数加权移动平均(EWMA)引入DNPE，通过EWMA对历史故障数据的累加作用，建立SPE统计量实现微小故障的检测，并仿真验证了EWMA DNPE算法对卫星ACS微小故障检测的有效性和可行性.     

A star identification algorithm based on radial and dynamic cyclic features of star pattern

A full-sky star identification algorithm based on radial and dynamic cyclic patterns is presented with the aim of solving the “lost-in-space” problem. The dynamic cyclic pattern match is applied with a maximum cumulate comparison method to identify sensor-catalog pairings in initial match, which substantially eliminates the effects of the star position noise, magnitude noise, and false stars. After initial match pairings of stars are obtained, a chain part extension technique is employed to quickly search for the longest match chain as the final result. Experimental results indicate that the proposed algorithm is highly robust to star position noise, magnitude noise and false stars. In a series of simulations, the identification rate of the algorithm is 97.50% with 2.0 pixels star position noise, 96.90% with 0.4 Mv star magnitude noise and 95.30% with four false stars respectively. Moreover, the algorithm achieves an identification rate of 58.08% when only six stars are in the field of view.     

服役飞机结构件腐蚀失效故障树分析及改进

对某出口用飞机铝合金结构件在热带海洋大气环境条件下服役时所发生的腐蚀失效问题,提出了采用故障树分析方法对引起飞机结构件腐蚀失效的各因素进行系统分析和探讨.根据结构件腐蚀失效过程及机理的分析,确定导致结构件腐蚀失效的各个因素,建立以结构件腐蚀失效为顶事件的故障树,通过布尔代数运算得到故障树的各阶最小割集.计算故障树顶事件的发生概率,并对底事件的概率重要度、相对概率重要度进行分析排序,找出引起铝合金结构件发生腐蚀失效的主要因素.分析结果表明飞机服役环境、阳极氧化工艺和选材是导致结构件腐蚀失效的主要因素.针对这些主要因素,提出了相应的改进防护措施.     

基于自适应观测器的飞轮故障诊断物理仿真

研究了反作用飞轮的故障诊断问题.针对反作用飞轮的非线性数学模型,分析了其故障模式,建立了其故障的参数化描述方法,并在此基础上提出了一种基于参数自适应投影的反作用飞轮故障诊断方法.该方法通过构造观测器,利用参数自适应投影算法来更新参数信息,保证观测器的误差收敛到零.最后对飞轮的正常模式和3种故障模式进行了物理仿真实验,结果表明提出的方法有效可行.