潜藏电路分析与故障模式影响分析相结合

把故障模式影响分析和潜藏电路分析相结合成一种可靠性综合分析方法可能性进行了专门论述，并举列加以说明，论证了此综合分析方法比任何单独的ＳＣＡ和ＦＭＥＡ能对系统进行更彻底地检查验证。     

发动机镀镉螺栓连接件的失效分析

对一种固体发动机安全机构上的螺栓连接失效件断口进行了扫描电子显微镜、金相组织、化学成分和Ｘ射线微区元素分析。基本朝该螺栓件失效断裂原因，由于钢制螺镀之后，低熔点金属镉从螺纹根部缺陷处渗入到基体内部引起晶界脆化，在应力的作用睛导致螺栓件失效断裂。     

俄制引进装备中数字板件国产化研制替代的探讨

针对维修中俄制引进地空导弹武器系统国产化数字板件替代装备联调过程中出现的延时累计误差“瓶颈”问题，分析研究了具体解决办法和措施，并通过了武器系统实弹打靶检验。     

起动发电机弹性轴断裂故障分析

对一起直流起动发电机弹性轴断裂故障进行分析和研究，并提出了相应的修理及预防措施。     

面向下行多天线传输的能效最优上行训练

针对时分双工(TDD,Time Division Duplex)多天线系统的下行传输,研究了以能量效率(EE,Energy Efficiency)最大为准则的上行训练设计问题.证明了存在信道估计误差时系统EE和频谱效率(SE,Spectrum Efficiency)上界是上行训练长度的凹函数,分析了信噪比和电路功耗等因素对两种准则下最优训练长度的影响.分析和仿真结果表明,当信噪比很高时,基于EE最优的设计将退化成基于SE最优的设计；而一般情况下,与最大化SE的训练设计相比,最大化EE要求系统配置更长的训练.     

A critique of reliability prediction techniques for avionics applications

Avionics (aeronautics and aerospace) industries must rely on components and systems of demonstrated high reliability. For this, handbook-based methods have been traditionally used to design for reliability, develop test plans, and define maintenance requirements and sustainment logistics. However, these methods have been criticized as flawed and leading to inaccurate and misleading results. In its recent report on enhancing defense system reliability, the U.S. National Academy of Sciences has recently discredited these methods, judging the Military Handbook (MIL-HDBK-217) and its progeny as invalid and inaccurate. This paper discusses the issues that arise with the use of handbook-based methods in commercial and military avionics applications. Alternative approaches to reliability design (and its demonstration) are also discussed, including similarity analysis, testing, physics-of-failure, and data analytics for prognostics and systems health management.     

混合回归模型及其在高耸结构风响应时域分析中的应用

针对多维ＡＲ模型同时求解回归系数矩阵所有元素的一些不足之处，本文提出了混合回归模型。通过对某一高耸结构的分析，表明混合回归模型对脉动风的模拟是有效的，并人数值模拟角度验证了，对于线性结构，外激的各态历经性可保证响应的各态历经性。     

某型飞机机轮轮毂破断故障分析研究

针对某型机机轮轮毂破断故障进行了分析研究,提出了改进预防建议.     

Real-time trajectory planning for UCAV air-to-surface attack using inverse dynamics optimization method and receding horizon control

This paper presents a computationally efficient real-time trajectory planning framework for typical unmanned combat aerial vehicle (UCAV) performing autonomous air-to-surface (A/S) attack. It combines the benefits of inverse dynamics optimization method and receding horizon optimal control technique. Firstly, the ground attack trajectory planning problem is mathematically formulated as a receding horizon optimal control problem (RHC-OCP). In particular, an approximate elliptic launch acceptable region (LAR) model is proposed to model the critical weapon delivery constraints. Secondly, a planning algorithm based on inverse dynamics optimization, which has high computational efficiency and good convergence properties, is developed to solve the RHCOCP in real-time. Thirdly, in order to improve robustness and adaptivity in a dynamic and uncer- tain environment, a two-degree-of-freedom (2-DOF) receding horizon control architecture is introduced and a regular real-time update strategy is proposed as well, and the real-time feedback can be achieved and the not-converged situations can be handled. Finally, numerical simulations demon- strate the efficiency of this framework, and the results also show that the presented technique is well suited for real-time implementation in dynamic and uncertain environment.     

基于动态时间阈值的报警聚合方法研究

针对网络入侵检测中持续性攻击引发的多个报警事件时间间隔变化的问题,引入时间间隔变异系数描述报警的时间波动特征;通过将报警数据属性分为时间约束属性和相似度约束属性,提出了一种利用动态时间阈值约束的相似报警数据聚合方法。实验结果表明,这种方法能有效减少持续性攻击触发的冗余报警。