亚轨道飞行器发动机故障下飞行程序设计方法

针对亚轨道飞行器单台发动机发生故障情况,提出了基于正指数攻角的发动机故障下飞行程序设计方法,给出了不同故障时刻的仿真结果,并与正常飞行情况进行了比较.仿真结果表明,对于不同故障时刻,该方法均能够在满足弯矩约束、攻角限制的情况下使得故障飞行器安全到达预定高度,为后续应急返回机动飞行提供有利的飞行条件.     

结构可靠性灵敏度因子的新标准化指标

鉴于以往可靠性灵敏度在不同算法下数值差异性较大,可靠性灵敏度数值仅能进行简单的重要性排序,数值本身难以反映出基本变量对输出不确定性的影响程度,提出了标准化灵敏度因子及标准化灵敏度因子向量。据此,其分量不仅反映了基本变量对输出不确定性的影响,还袁征了此变量在全部变量中对输出不确定性的重要性程度,在数值上具有明确的物理意义,进一步在线性机构条件下推导出标准化灵敏度因子的具体求解公式。经数值算例分析,算法简单易行,运算量小,计算效率高。     

Adaptive path planning for unmanned aerial vehicles based on bi-level programming and variable planning time interval

This paper presents an adaptive path planner for unmanned aerial vehicles (UAVs) to adapt a real-time path search procedure to variations and fluctuations of UAVs’ relevant performances, with respect to sensory capability, maneuverability, and flight velocity limit. On the basis of a novel adaptability-involved problem statement, bi-level programming (BLP) and variable planning step techniques are introduced to model the necessary path planning components and then an adaptive path planner is developed for the purpose of adaptation and optimization. Additionally, both probabilistic-risk-based obstacle avoidance and performance limits are described as path search constraints to guarantee path safety and navigability. A discrete-search-based path planning solution, embedded with four optimization strategies, is especially designed for the planner to efficiently generate optimal flight paths in complex operational spaces, within which different surface-to-air missiles (SAMs) are deployed. Simulation results in challenging and stochastic scenarios firstly demonstrate the effectiveness and efficiency of the proposed planner, and then verify its great adaptability and relative stability when planning optimal paths for a UAV with changing or fluctuating performances.     

航空发动机导流叶片角度调节参数变化故障分析

某型发动机低压压气机进口导流叶片角度α1,其电子调节部分执行机构电磁活门的占空比(Sα),在整个调节过程中是起关键作用的重要参数,但在台架试车过程中曾多台次出现在不同次检查时Sα数值变化的故障。通过对α1主调节系统工作原理的深入分析,确定试车中Sα变化故障是由于燃油调节机构掺混入空气所致,并得到试车验证。本研究对发动机试车中类似故障的排除具有重要的参考意义。     

基于光谱分析技术的磨损故障监测

采用转盘电极式原子发射光谱分析技术,监测某型燃气轮机传动润滑系统磨损状况的发展变化趋势,及时诊断早期磨损故障.为确保光谱分析技术监测的准确性,着重研究了环境温度波动、标准曲线细化、样品黏度以及磨损颗粒尺寸等主要因素对测量结果的影响,并简要阐述了光谱分析技术的基本原理.经大量研究试验表明:光谱分析技术能够提前预报燃气轮机传动润滑系统可能发生的磨损故障,是油液状态监控的1种有效手段.     

Demonstration of a high sensitivity GNSS software receiver for indoor positioning

Advances in signal processing techniques contributed to the significant improvements of GNSS receiver performance in dense multipath environments and created the opportunities for a new category of high-sensitivity GNSS (HS-GNSS) receivers that can provide GNSS location services in indoor environments. The difficulties in improving the availability, reliability, and accuracy of these indoor capable GNSS receivers exceed those of the receivers designed for the most hostile urban canyon environments. The authors of this paper identified the vector tracking schemes, signal propagation statistics, and parallel processing techniques that are critical to a robust HS-GNSS receiver for indoor environments and successfully incorporated them into a fully functional high-sensitivity software receiver. A flexible vector-based receiver architecture is introduced to combine these key indoor signal processing technologies into GSNRx-hs™ – the high sensitivity software navigation receiver developed at the University of Calgary. The resulting receiver can perform multi-mode vector tracking in indoor environment at various levels of location and timing uncertainties. In addition to the obvious improvements in time-to-first-fix (TTFF) and signal sensitivity, the field test results in indoor environments surrounded by wood, glass, and concrete showed that the new techniques effectively improved the performance of indoor GNSS positioning. With fine GNSS timing, the proposed receiver can consistently deliver indoor navigation solution with the horizontal accuracy of 2–15 m depending on the satellite geometry and the indoor environments. If only the coarse GNSS timing is available, the horizontal accuracy of the indoor navigation solution from the proposed receiver is around 30 m depending on the coarse timing accuracy, the satellite geometry, and the indoor environments. From the preliminary field test results, it has been observed that the signal processing sensitivity is the dominant factor on the availability of the indoor navigation solution, while the GNSS timing accuracy is the dominant factor on the accuracy of the indoor navigation solution.     

多模型直接自适应执行器故障补偿控制系统

为了更快更好地补偿执行器故障带来的不确定性,发展了一种新的多模型自适应执行器故障补偿控制系统设计方法。首先,分析所有可能的执行器故障模式,得到故障模式集。再针对每一种故障模式,分别进行控制器设计,控制器设计时采用直接模型参考自适应执行器故障补偿控制方法进行设计。然后根据参数估计误差分别计算每种故障模式下系统的性能损失函数,选择性能损失最小的子系统对应的控制器作为当前的全局控制器。最后以飞行控制系统为例进行了仿真,仿真结果表明,所设计的多模型直接自适应执行器故障补偿系统闭环稳定,且有良好的跟踪性能。     

GNSS接收机数字载波跟踪环建模与噪声性能分析

针对GNSS接收机高灵敏度跟踪问题,研究数字载波跟踪环热噪声相位颤动与相干积累时间长度的关系.在分析I·Q鉴相器的Costas载波环信号处理流程的基础上,建立了新的环路线性化模型.基于该模型,推导了由最佳模拟环路滤波器双线性变换离散化得到的数字载波跟踪环的噪声性能.数值分析表明:采用I·Q鉴相器的二阶、三阶数字载波环热噪声相位颤动,随相干积累时间的增大先减小后增大,存在热噪声相位颤动最小意义上的最佳相干积累时间.仿真结果验证了理论分析结论,同时表明新建模型对数字载波跟踪环的描述比传统模型更准确.文中给出的各载噪比和环路带宽组合条件下的最佳相干积累时间,可用于指导高灵敏度接收机载波跟踪环设计.     

静止轨道卫星在轨温度参数变化规律研究

分析了静止轨道在轨三轴稳定卫星各面上温度参数的变化规律,并通过理论计算得到卫星各面上光强的变化曲线,研究了温度参数变化与对应面上光强的关系,建立了温度参数与光线的线性模型,结果表明模型与实际数据能较好地吻合,对温度参数的预测以及故障的判断具有一定的参考价值.     

终端区四维轨迹到达时间的控制与计算

研究的目的是使管制员通过飞行管理计算机计算的结果来较精确地预测飞机到达各航路点的时间范围,在同时有多架飞机进场的情况下合理安排进近顺序。利用向量分解法,分析了飞机在有风情况下,特别是风向风速改变时地速的变化。给出了实时地速的计算方式,指出了通过调节两个航路点间加速度变化的位置来控制飞机到达下一航路点的时间,并给出了到达各航路点时间范围的计算方式。通过计算,管制员不仅可以推测出到达各航路点的高度及时间范围,避免飞行冲突,还能够安全有序的引导飞机按预计时间着陆,减少航班延误量。