基于强度退化的齿轮可靠性计算模型研究及应用

为了研究强度退化对齿轮可靠性的影响,针对一般工作环境下具有多种失效模式的齿轮,通过引入条件概率,考虑零件失效相关性和材料性能退化因素,利用动态应力-强度干涉模型建立基于强度退化的齿轮可靠性的计算模型。以某型齿轮可靠度计算为例,其计算结果表明:在考虑材料强度退化时,齿轮的可靠度随工作时间的增加不断降低,验证了该计算模型的准确性。     

×××机翼主梁的寿命分布研究

本文通过运用Ｗ∧２统计量的检验方法对ＸＸＸ飞机八个失效的机翼主梁寿命分布进行了检验,得出该主梁寿命分布为威布尔分布。     

某发动机低频不稳定燃烧的消除

根据发动机热试车出现的低频不稳定燃烧现象，分析了产品的故障模式，建立了相关零组件模型。对相关零件进行了改进设计，消除了发动机低频不稳定燃烧现象。     

航天器共因失效分析与预防初探

简要介绍了共因失效相关概念及分析方法,通过共因失效案例分析,对航天器如何开展共因失效分析以及如何预防共因失效进行了初步探讨,提出了航天器开展共因失效分析的定性和定量方法以及预防共因失效的措施。     

示波器输入电容对上限截止频率测量的影响

单管放大电路是模拟电路中的一个经典实验。通过这个实验,学生可以更好地掌握静态工作点的调整和测试方法,并通过测量放大电路的主要性能指标,体会静态工作点对动态特性的影响。实验电路的上限截止频率仿真值和实测值存在较大差异,本文针对这个问题进行了详细的分析,指出示波器的输入电容是引起差异的主要原因,并进一步讨论了可有的改进测试方法。     

对某装备任务系统软件故障的研究

通过对任务系统软件故障进行定位和分析，提出了基于互斥信号量对获取数据进行现场保护及在任务管理区增加对时间的容错处理的解决措施，并对其进行了分析和验证。     

基于PIC＋FPGA飞机直流供电系统设备故障预测研究

针对飞机直流供电系统中直流设备工作情况，本文利用FPGA双进程有限状态机方法控制A／D转换器，快速准确采样多路信号。用模糊理论的建议语言规则，结合PIC单片机的控制优势，从而解决飞机直流供电系统设备故障预测报警。     

Reconfigurable Flight Control Design for Combat Flying Wing with Multiple Control Surfaces

With control using redundant multiple control surface arrangement and large-deflection drag rudders,a combat flying wing has a higher probability for control surface failures.Therefore,its flight control system must be able to reconfigure after such failures.Considering three types of typical control surface failures(lock-in-place(LIP),loss-of-effectiveness(LOE) and float),flight control reconfiguration characteristic and capability of such aircraft types are analyzed.Because of the control surface redundancy,the aircraft using the dynamic inversion flight control law already has a control allocation block.In this paper,its flight control configuration during the above failures is achieved by modifying this block.It is shown that such a reconfigurable flight control design is valid,through numerical simulations of flight attitude control task.Results indicate that,in the circumstances of control surface failures with limited degree and the degradation of the flying quality level,a combat flying wing adopting this flight control reconfiguration approach based on control allocation could guarantee its flight safety and perform some flight combat missions.     

Administrative reform of Japanese Space Policy Structures in 2012

In Japan, there are several government ministries and agencies with important roles in the development and use of space. In 2012, Japan restructured its administrative organs related to the development and use of space through legal amendments to the original acts that established these organs. Although this was an important administrative reform that took four years of planning and discussion to accomplish, this restructuring has not been communicated well outside of Japan. This study provides the first comprehensive overview of the recent legal changes in Japanese space policy. In contrast to some reports, the Ministry of Education, Culture, Sports, Science and Technology (MEXT) still has primary responsibility for the finances and personnel of the Japan Aerospace Exploration Agency (JAXA). This continues to be true even after the Cabinet Office begins its new role as the focal point for formulating Japanese space policy. It remains to be seen how the policy direction of the Cabinet Office will interact with the operational, financial, and personnel responsibilities of MEXT. I argue that knowledge of the roles of MEXT and the Cabinet Office in space policy, and the tension between the two organizations, is key to understanding Japan's future space policy decision-making process. By tracing the history of Japanese space policy since 2001, I also suggest that if bureaucrats had thought more deeply before making major reforms to space policy and its administration, there would have been less confusion over the development of national space policy this past decade. This paper concludes by identifying some key elements to monitor in the coming years of Japan's space policy.     

多种失效模式相关的机构运动可靠度计算方法

机构运动中必然存在多种相关失效模式,多为影响机构运动的各类随机变量函数.为了在机构运动可靠性分析中有效考虑多种相关失效模式的影响,建立了考虑多种失效模式相关条件下的机构运动可靠度计算模型,并实现了对多种失效模式相关条件下的机构运动可靠度计算模型的求解,为考虑多种相关失效模式下的机构运动可靠性分析提供了一种有效途径.以6408滚动轴承为例,进行100 000抽样计算,考虑失效模式相关条件下运动可靠度为95.998 9%.该方法精度较高,具有一定的理论意义和应用价值.