Sensitivity Analysis for Safety Design Verification of General Aviation Reciprocating Aircraft Engine

This paper presents an application of global sensitivity analysis for system safety analysis of reciprocating aircraft engine. Compared with local sensitivity analysis results, global sensitivity analysis could provide more information on parameter interactions, which are significant in complex system safety analysis. First, a deterministic aviation reciprocating engine thermodynamics model is developed and parameters of interest are defined as random variables. Then, samples are generated by Monte Carlo method for the parameters used in engine model on the basis of definition of factor distribution. Eventually, results from engine model are generated and importance indices are calculated. Based on the analysis results, design is improved to satisfy the airworthiness requirements. The results reveal that by using global sensitivity analysis, the parameters could be ranked with respect to their importance, including first order indices and total sensitivity indices. By reducing the uncertainty of parameters and adjusting the range of inputs, safety criteria would be satisfied.     

一种共轴双旋翼式火星飞行器设计及其试验验证

针对火星飞行器探测需求,提出了一种共轴双旋翼式火星飞行器,基于计算流体力学方法优选了桨叶翼型、平面形状和扭转角等结构参数,基于叶素动量理论建立了旋翼气动力学模型,利用数值模拟方法选择了旋翼转速、旋翼间距和桨叶安装角等飞行参数,设计了原理样机"火星飞鸟-I"的结构与控制系统。构建了火星大气环境模拟器和重力补偿与运动约束装置,开展了模拟火星环境下旋翼式飞行器地面飞行试验,验证了共轴双旋翼式火星飞行器的推进性能,展望了旋翼式火星飞行器技术的发展方向。研究成果对我国开展的火星探测工程具有重要借鉴价值。     

基于Event B的中断管理需求和设计形式化建模与验证方法

随着软件复杂度的迅速增长,传统的基于测试的方法逐渐难以满足航天器操作系统的可靠性和安全性需求,形式化方法逐渐成为航天器操作系统安全可靠性的有效保障.基于Rodin平台,采用Event B形式化语言,通过需求和设计重写、制定精化策略并逐步精化的方法,对航天嵌入式操作系统SpaceOS2的中断管理模块建立了需求层和设计层形式化模型,将模型检验和定理证明相结合,验证模型的正确性并且满足安全性质.     

某型发动机盘LCF试验设计方案可靠性分析

分析了针对某型发动机风扇盘、压气机盘和涡轮盘等5项低循环疲劳(LCF)寿命试验的设计方案,计算得出了以上试验件在到达给定寿命时的可靠度和故障率,并与标准要求进行了对比。针对可靠度和故障率无法达标的问题提出了改进方案。     

弹上电子产品发射可靠性试验验证必要性判别方法

提出了弹上电子产品开展发射可靠性验证试验的必要性判别方法,论述了弹上电子产品完成飞行可靠性验证试验后,无须再开展发射可靠性验证试验,为工程决策提供了技术支撑。     

内埋式模型操纵面自动变角度系统研制

针对风洞试验模型操纵面角度的改变,开发了内埋式自动变角机构及控制系统,对控制角度进行了地面校准,并采用三角翼模型进行了风洞常规测力实验、重复性实验和操纵面效率试验。结果表明,采用自动变角机构改变操纵面角度的试验精准度均较高,完全满足国军标的要求,说明本操纵面自动变角系统的研制是成功的,在风洞试验中可以代替人工更换角度片方式,大大提高实验效率。     

Progress of microgravity material research during the period of 2007—2009

Orbital experimental researches on crystal growth of Mn-doped GaSb and Bi2Se0.21Te2.79 are briefly summarized. The space experiments were completed in September of 2007 on broad the Foton-M3 satellite of Russia. Ground-based researches on the solidification behaviors of Al-Al3Ni, Al-Al2Cu, Ag-Cu eutectic, Al-Pb monotectic and Cu-Co peritectic alloys in a 50-meter-high drop tube were investigated. New experimental results on the ultrasonic field and the temperature recycling induced to chiral symmetry breaking of NaClO3 crystal also were reported in the present paper.      

民用飞机系统安全性分析中EWIS部件的考虑

通过对适航规章25.1709的分析,结合AC25.1701,提出了民用飞机系统安全性分析中需考虑EWIS部件的一些方面,并初步研究了具体的分析方法。     

嫦娥二号卫星CCD立体相机设计与验证

介绍了嫦娥二号卫星CCD立体相机的设计思想与结果、发射前检测与地面推扫成像试验.嫦娥二号卫星CCD立体相机仍采用与嫦娥一号相同的线阵推扫成像模式,但嫦娥二号卫星CCD立体相机的技术指标要求大幅度提高,主要表现为地元分辨率由嫦娥一号的120m提高为嫦娥二号在100km圆轨上优于7m与在100km/15km椭圆轨道近月弧段...     

组合互感器检定方法探讨

提出了符合组合互感器运行状态的整体检定方法以及按元件分别检定计算整体误差的方法;给出了几种条件下电流、电压互感器和组合互感器的误差限值;对整体检定方法的优点和检定用标准器的选择进行了论述。