FSW和VP-TIG焊接箱底的力学特征分析

针对纵缝采用搅拌摩擦焊、环缝采用VP-TIG熔焊工艺的箱底进行液压试验,并在试验过程中监测各典型焊缝位置的应变响应,结果显示箱底上搅拌摩擦焊缝和熔焊焊缝交叉形成的"T"型接头区域在试验中最先进入屈服,说明该位置材料的屈服强度较低,是箱底承载的薄弱环节。     

大气环境监测卫星校飞试验设计与验证

针对大气环境监测卫星上国际首次采用主被动结合探测体制的效能,在卫星研制初样阶段开展了多载荷综合探测航空校飞试验,验证了大气探测激光雷达(ACDL)探测性能以及双偏振载荷匹配探测原理,并为地面应用系统提供真实遥感数据源,验证数据处理方法的正确性。详细介绍了大气环境监测卫星校飞试验的总体设计方案,系统阐述了试验目的、系统构成、试验过程,对试验结果进行了详细分析,为卫星发射入轨后应用效能保证奠定了基础,同时为后续校飞试验积累了经验。     

Method for utilizing PIV to investigate high curvature and acceleration boundary layer flows around the compressor blade leading edge

Particle Image Velocimetry (PIV) is a well-developed and contactless technique in experimental fluid mechanics, but the strong velocity gradient and streamline curvature near the wall substantially limits its accuracy improvement. This paper presents a data processing procedure combining conventional PIV and newly developed Mirror Interchange (MI) based Interface-PIV for the measurement of the boundary layer parameter development in the blade leading edge region. The synthetic particle images are used to analyze the measurement errors in the entire procedure. Overall, three types of errors, namely the errors caused by the Window Deformation Iterative Multigrid (WIDIM) algorithm, the discrete data interpolation and integration, and the wall offset uncertainty, comprise the main measurement error. Specifically, the errors due to the discrete data interpolation and integration and the WIDIM algorithm comprise the mean bias, which can be corrected through the error analysis method proposed in the present work. Meanwhile, the errors due to the WIDIM algorithm and the wall offset uncertainty contribute to the measurement uncertainty. Computational fluid dynamics-based synthetic particle flows were generated to verify the newly developed PIV data processing procedure and the corresponding error analysis method. Results showed that the data processing method could improve the accuracy of PIV measurements for boundary layer flows with high curvature and acceleration and even with significant flow separation bubbles. Finally, the data processing method is also applied in a PIV experiment to investigate the boundary layer flows around a compressor blade leading edge, and several credible boundary flow parameters were obtained.     

中弧线角度分布对跨音叶栅特性影响研究

中弧线角度分布形式对压气机叶片表面等熵马赫数分布具有重要的影响。为了对比不同压气机叶型的流动特征，采用数值模拟和平面叶栅试验相结合，对两种中弧线角度分布形式的跨音叶型在不同来流工况下的气动特性展开了详细研究。结果表明：在设计点，前加载配合均匀加载的中弧线角度分布叶型能够消除叶片吸力面的局部超音区，与前加载的中弧线角度分布叶型相比，叶片表面等熵马赫数分布更加饱满。其次，前加载配合均匀加载叶型能够推迟叶片吸力面的涡层失稳，减弱了吸力面分离涡与端壁分离涡的耦合作用，进而改善了端区的流动状况，截面平均总压损失系数降低了8.2%。最后，对非设计工况下两种中弧线角度分布的气动特性进行了分析，随着来流马赫数的降低，两种中弧线角度分布叶型的损失差异逐渐减小，均具有较优的气动性能。来流速度对叶片表面等熵马赫数、损失分布和分离面形状特征影响较小，仅影响叶片表面等熵马赫数和损失数值大小。     

往复节流式正脉冲发生器性能分析CSCD

在石油开采与钻探领域,脉冲发生器作为旋转导向系统井下信号传输系统的重要组成部分,提高压力脉冲幅值有助于提升旋转导向系列产品的市场竞争力。为了揭示其工作原理及提高压力脉冲幅值,基于计算流体动力学,利用用户自定义函数(UDF)、动网格技术、非牛顿流体模型,借助Fluent平台对往复节流式正脉冲发生器进行了动态数值实验。利用离散形式的动量方程将主阀体与电磁阀的被动运动转变为主动运动,选择适用于k-ε湍流模型的赫-巴非牛顿流体本构方程描述泥浆,提高了计算的收敛性与运动的可控性。基于非牛顿流体的流固耦合方法,更真实地模拟了脉冲器在井下工作过程。结果表明限流环内径越小或入口排量越大,则压力脉冲幅值与信号发生频率越大。     

Fault tolerant attitude control of under-actuated spacecraft: Theory and experiment

This paper investigates fault tolerant attitude control theory and experiment for under-actuated spacecraft with one reaction wheel completely broken and two others suffering actuator faults of partial loss of effectiveness or bias. A non-smooth robust adaptive fault tolerant control law is proposed under the zero-momentum and input saturation conditions. It shows that the available reaction wheels need to produce sufficient control torque for the fault tolerance. Such a new control method is implemented in a semi-physical simulation system of an air-bearing platform. Experimental results show the effectiveness of the proposed method in spacecraft practical engineering.     

固体姿轨控发动机喉栓运动时序实验设计方法

固体姿轨控发动机通过伺服机构控制喉栓位移实现推力矢量调节。为实现推力精确调控，需拟合大量地面试验数据，得出发动机喉栓位移与推力矢量间的数学模型。提出了一种面向喉栓式固体轨控发动机喉栓运动时序实验设计方法，实现了单次试验中不同燃烧室理论压强及喉栓位移组合最大覆盖，为最低试验成本下精准构建喉栓位移与推力输出模型提供训练样本。以四阀固体轨控发动机作为对象，基于零维内弹道实现燃气发生器压强求解。采用Φp准则评估喉栓位置组合遍历性，并对其进行优化，获得合理的喉栓运动方案。算例结果证明实验设计后方案在整个运动周期内几乎遍历各种组合状态，较实验设计前Φp值提升近40%，验证了本文实验设计方法在时序工程问题中的优良性能。采用实验设计方法可提高固体姿轨控发动机地面试车数据利用效率。